I just completed refinishing an outdoor side table. On the metal, I sanded and cleaned it. Put a base of Rust-Oleum textured protectant followed by two coats of Rust-Oleum Hintr Green. The wood is ...
I have just built my very first picnic table (really, my very first anything). I used pressure treated lumber and galvanized hardware. I would like to seal the table before I put it outside, but I'm ...
I'm looking to build an outdoor swing set for my kids in the garden. I'd like to know what is the most durable wood to use that doesn't warp or bend. I've been down to the big department stores to get ...
I bought some treated 2x4's from Lowes, and it was fairly wet and heavy. I went ahead and built a firewood rack, but screwing into it releases a lot of water. It got me thinking, is it better to let ...
I am going to build a brick BBQ similar to something like the below BBQ picture. The position will be against the house and will get wet from rain. I only plan to cover the BBQ. Would I be ok to ...
There are pressure treated (4"x4") fence posts (set in concrete) nearby to a house. In that area there were previously termites (professionally treated in-ground). This is in a humid region, along the ...