I can't find answer anywhere, can somebody tell me why and how to avoid these little dots/holes when I spackle. I also including the pic of the compound I'm using.
I hung drywall horizontally in my bedroom and hired a company to mud and tape it so that I could prime and paint. As you know, drywall sheets are recessed along the edges in order to hold drywall ...
I am a new 1st time home owner. The house I purchased is an older home, and has had some "renovations". The people who were there before me 'remodeled' the kitchen by taking out a wall that had ...
Is it common for professional drywallers to tape narrow corners, but not mud over the tape if it's going to be covered with moulding?
Sorry to spam SE with questions relating to a job done by a company I hired to finish the project in my room, but some things seem very questionable to me. In the below pics you will see a narrow ...
I had to cut access panels in the ceiling of a 7' x 11' room to make several plumbing repairs. The ceiling has the slapbrush/stomp texture: I have patched the drywall and I plan on restomping the ...
We just finished texturing our ceilings with a knock-down texture, however the following day we noticed wide grid-lines in the ceiling everywhere we taped and mudded. We did not prime/seal the ...
We have plaster textured walls through out our entire house that are in good condition, but are just ugly. Is it ok to skim coat or is drywall a better solution. We are first timers doing our own ...
This was my first attempt at mudding drywall, and I thought it was smooth and flush to the wall; however, after painting the wall I did notice that the edges of the mudded seams were completely ...