Attaching something to a wall. If you're using this tag, your question is probably a duplicate.

learn more… | top users | synonyms

18
votes
4answers
868 views

Nicely mounting 2x4s to wall

I would like to make some bookshelves similar to what is seen here: My question is how to nicely mount these to the wall. Obviously I could simply angle some screws into the wall studs, however I ...
9
votes
4answers
6k views

Should I be worried if I missed the studs while mounting my TV?

I think I missed the studs based on how easily the drill moved through the drywall. My LCD only weighs 27lbs and the mount itself is 5lbs (rated to hold 165lbs, and uses 4 8mm lag bolts). I pulled as ...
7
votes
4answers
4k views

My house has steel “2x4s” in the walls, can I hang cabinets, a TV, or some other heavy item from them?

The question is pretty much all in the title: My house has metal "2x4's" in the walls. Can I hang cabinets or a TV directly on these metal studs? If not directly, is there something special I must do? ...
6
votes
2answers
2k views

How do I mount 20 lb speakers to drywall between studs?

I have a pair of 20 lbs speakers that I want to mount to the drywall which is between two studs. How do people recommend these speakers be mounted? I would like to swivel and tilt the speakers. The ...
6
votes
2answers
1k views

If my wall has metal studs, is it better to anchor heavy objects through just drywall or also through the studs?

I live in an apartment that has that has metal studs. I'm considering hanging various things from the wall, including a coat rack that will span 5 or 6 studs. I've seen advice that says metal studs ...
5
votes
2answers
2k views

How do I wire my wall-mounted HD TV?

This image wall-mount setup should give a good idea of the current TV set up on the wall. I wanted to use a SmartStrip to power my TV and all the other devices (receiver, BluRay player, Wii, cable ...
5
votes
3answers
11k views

How to mount hooks into concrete ceiling that must be able to support several times bodyweight?

I am on the top floor of a loft apartment that used to be a factory. I want to install several hooks or some other fixture into my concrete ceiling from which I can hang gymnastic rings, a punching ...
5
votes
1answer
1k views

How do I mount TV through 3 layers of drywall and into studs?

I have a 65lb 46" LCD television and a Sanus "flush" style wall mount. The mount instructions suggest that it shouldn't be mounted anywhere where there is more than the thickness of a single sheet of ...
4
votes
2answers
12k views

Can I hang a bathroom shelf with command strips or something similar?

I'm currently living in an apartment that doesn't allow me to put anything larger than a finishing nail sized hole in the wall. I have a small bathroom shelf that I would like to put up that consists ...
4
votes
5answers
6k views

How do I install this wall mount bathroom sink?

I'm replacing a sink that was on a vanity cabinet and hoping to do as little busting through the perfectly good tile as possible. I heard a rumor that I need to make very sure that the sink is ...
4
votes
1answer
167 views

Can I use a magnet to make a hinged mirror stick to the wall?

After installing my Ikea mirror which can open like a door (in order to install small hooks on the wall behind it and hang keys and stuff), I realize it touches the wall only if I apply pressure on ...
4
votes
3answers
3k views

How can I mount a tablet on a wall?

Expanding my music set-up, I'm planning to mount a tablet in my kitchen mostly as remote-control (for music playing on the server), but as it can also show websites and movies, it might get ...
4
votes
3answers
705 views

How do I mount a TV on a solid wood wall?

I have a 51.8lb Sharp Aquos LC46D85U that I'd like to mount above my fireplace. The problem is that there aren't any studs (at least none that I can find) behind my wood walls. My walls are not ...
4
votes
1answer
2k views

How is a floating desk top supported against the wall?

Example of a floating desk top (courtesy of Phil Curtis): With increased height, it'd be one of simplest standing desk designs, and I am planning to do this at home. But, I am not sure how ...
4
votes
2answers
295 views

Screwing into the underside of countertop - can it support a little weight?

We have a space with a wide countertop set up in a space that functions as a workbench. There are no cabinets underneath. Instead, you can pull up chairs to it. There are computers there and it ...
4
votes
5answers
6k views

How can I mount a desk on a wall with L-brackets?

I'm currently planning a new wall-mounted computer desk and intend to use something similar to this as the top: However, my end goal is for a wall-mounted desk, using L-Bracket mounts. I've never ...
4
votes
1answer
617 views

How much movement is normal after mounting a TV on partition wall?

I have a wall that's made of plasterboards mounted on metal studs. I have mounted two DVD cabinets (each 22kg) and an LCD TV (40kg). To mount all this, I installed 6mm thick MDF panels across 5 of ...
3
votes
2answers
30k views

How can I mount a TV when I can't find studs inside my wall?

WARNING: I'm not the greatest handyman. I bought a TV mount the other day, expecting to hang my heavy 40" TV above the fireplace. However, the instructions specifically say to first screw the mount ...
3
votes
4answers
1k views

Can I use 2x4s to extend studs so I can mount my TV?

I need to mount my 55" TV to the left of the studs. Can I do this simply by running a couple 2x4s off the studs, and then connecting the mount to the 2x4s? While I imagine this can be done for lighter ...
3
votes
4answers
2k views

How can I hang heavy objects on a wall, without leaving any marks?

Command Hooks don't hold very much weight wise and I would like to mount heavy objects - e.g. a whiteboard ... any ideas? (yes this is drywall - I cannot leave any marks in it ). context: college ...
3
votes
1answer
2k views

Will 1/4" drywall with 2x4 studs hold a TV wall mount securely?

I want to install a flat screen TV wall mount (full motion kind) into 1/4' drywall with 2x4 studs. There will be 4 attachment points, to studs 24" apart. Total weight of the wall mount and the TV will ...
3
votes
3answers
6k views

How do I hang a shelf without drilling holes?

I'm currently living in a house in which we have clear instructions not to drill through the walls for danger of asbestos. I purchased a small projector and would like to mount a shelf to the wall, ...
3
votes
3answers
2k views

How can I attach a shelf to a tile wall in a repairable manner?

I am renting a flat and have permission from the landlord to put up shelves etc as long as "I don't wreck the place". In the kitchen there is a lack of storage space, and a large blank tiled wall ...
3
votes
3answers
4k views

How can I mount speakers that don't have mount adapters?

How can I mount a pair of speakers to my apartment walls? Specifically, how do I mount speakers that have no mounting points? They are from a turntable set from the 80's most likely before the ...
3
votes
1answer
472 views

What considerations do I need to make when mounting heavy objects on plaster walls?

I have just moved into an old apartment in Brooklyn. The landlord has warned us that all the walls are plaster with wood framing. I have not dealt with this type of wall before. I would like to hang ...
3
votes
1answer
555 views

How to secure aluminium window lock handle that keeps falling off?

The lock handle on my aluminium windows keeps falling off. The handle had previously fallen off when I first moved in a year ago and the landlord remounted it. Since then it has become loose a few ...
3
votes
3answers
397 views

Can a TV be mounted directly into a heavy wooden entertainment center?

My dad has a built in entertainment center that is buit to accommodate an old CRT television. As such, the entertainment center itself is fairly deep (call it 24" or so), but the cavity for the ...
3
votes
2answers
957 views

How can I remove plaster board/drywall rawl plugs?

I have used red head metal plaster board rawl plugs. The kind that flare out flat when you screw the bolt in. I now need to remove them. Is there a trick to remove them so I can reuse them or take ...
3
votes
1answer
155 views

Is it safe to mount a medium-sized air compressor to the floor to stop or limit vibrations?

I have a 220V 6hp 33gal oil-less horizontal air compressor that aside from being noisy rattles all over the floor. Stock Image: I would like to either mount it to the floor or build a small ...
3
votes
1answer
154 views

Can we install an above-counter sink (large, about 31“ x 18” x5") on a bottom-mount countertop?

Currently, we have a small oval undermount sink in our bathroom that is roughly 16 by 19.5. We are thinking bout changing it to a large, rectangular, above-counter sink (13 x 18 x 5) but we obviously ...
3
votes
4answers
1k views

Can I use bolts to attach a bed to the walls of my room?

I plan on mounting my bed to the walls of my room. You can say that it will look like a loft bed without the legs. To make it look like it really is floating, I won't be using angle brackets. Instead, ...
3
votes
1answer
341 views

Hanging 73 lb frameless glass panels on drywall

I have to hang a bunch of glass panels on drywall. they have no frames. Each glass piece is 70"x33.5" and weighs 73lb. the thickness is about 1/4", 5/16". most need to get hung on drywall, a few of ...
3
votes
1answer
3k views

How can I mount a security camera on the outside of the house?

I'm tasked with mounting a security camera on the outside of the house and I'm not sure what would be the right way to do this. There are two basic problems: how to mount the thing and how to run the ...
3
votes
1answer
391 views

How do I hang a wall accessory fitted with 'Wall Grabbers' by Pinnacle?

How is this shelf meant to be hung? Should I just use two screws into the drywall? It won't be supporting anything heavy, but screws don't seem like they would make the shelf mount flush to the wall. ...
3
votes
1answer
325 views

How do I mount a new TV antenna to an existing antenna mast?

I would like to mount my new antenna to the side of my existing antenna mast. Is there a device that I can buy that will clamp on to both poles? Update - With pictures Picture 1 is an old antenna ...
2
votes
1answer
176 views

How can I tell if this is wood or drywall?

I am trying to mount speakers on the topmost part as you can see here: Basically I am mounting it on that thin vertical area that you can see. Is this part wood or drywall? From tapping it, it ...
2
votes
2answers
4k views

Where to place shower curtain rod in relation to the tub? [closed]

I am not asking how high to mount the shower curtain rod (that is easy to determine from an existing shower curtain). I am trying to figure out how far "into" the tub it should be mounted. I want ...
2
votes
2answers
51 views

How do I know if I will drill into a hole in a wall that was already made?

I drilled 2 large holes for mounting a flat screen in the bedroom. One hole is in a wood stud and the other is a metal stud. I will be renting out our apartment and will be taking the TV down and ...
2
votes
2answers
336 views

What's behind my drywall?

I live in an apartment in NYC, built in 1973. I'm trying to mount something to the wall which requires two screws placed 5 inches apart vertically. I used a stud finder to find a vertical stud in ...
2
votes
1answer
428 views

Punching bag mounted on ceiling in flat

I would like to mount a punching bag on the ceiling as there are not really any good boxing gyms here in Madrid. Key Facts I am on the Ground Floor known as "Bajo" in Spanish The weight on the ...
2
votes
3answers
193 views

Re-anchoring in existing (failed) anchor holes in brick

I've had a shelf come free from the wall on which it was anchored. The shelf is fairly deep (~2') and solid wood, so it's heavy, and it's meant to take some weight (think like a breakfast bar). The ...
2
votes
3answers
943 views

Should I mount brackets to the wall or the shelves first?

I've planning to mount some shelves using these IKEA Lerberg brackets Should I mount them to the wall or the shelf first?
2
votes
2answers
1k views

Fluorescent Light In Garage - Mounting Issues

In our garage, I'm trying to mount a flourencent light fixture that is 4 foot long. The problem is, I don't know how to mount it. I'm assuming that I would want to drill the screws into the ceiling ...
2
votes
3answers
176 views

How to (portably) mount warped plywood artwork on apartment drywall?

I have a 4' x 4' piece of plywood artwork (acrylic painting) that has become warped. It used to be mounted to drywall using velcro strips, but now the outward force of the warp is strong enough that ...
2
votes
1answer
113 views

Can I drill another set of holes in my studs to mount a TV?

I currently have a 47 inch TV which is mounted onto studs in my wall which is good. But now I plan to get 70 inch TV which means my existing wall mount frame must move a little upwards to fit above ...
2
votes
1answer
2k views

How can I mount an LCD TV onto the *wall* of an RV?

I have an RV and I want to mount a flat panel LCV TV onto the wall of the RV. Most people who put LCD's into their RVs put them up above the driver where wooden cabinetry exists, but I do not want to ...
2
votes
1answer
60 views

Can I attach 2x4s to the studs in order to mount my TV?

I have a tv wall mount that can be installed into studs 16" apart. However id like to use it on a wall with studs 24" apart. I'm thinking of drilling 2x4's into the studs and then attaching the ...
2
votes
1answer
124 views

Can I attach a television mount using custom drilled holes?

I have a 94" wall with 14" studs. There is a stud right in the center at 47". I have been looking for a full motion mount wide enough, so that I can use the studs on both sides of the center. Meaning ...
2
votes
1answer
446 views

What should I use as a base for my wall mounted PC case?

Here is an example of what I am trying to put together: What material could I use as a base onto which I can mount the motherboard, hard-disk and other wiring?
2
votes
1answer
3k views

Can I install an under-mount sink in an existing Formica counter?

I am slightly remodeling my kitchen (on a slim budget). Because I cannot afford granite countertops, I've decided to use the countertop makeover kits on the Formica that are available and make it ...