Attaching something to a wall. If you're using this tag, your question is probably a duplicate.

learn more… | top users | synonyms

0
votes
1answer
19 views

Mounting bookshelf in Closet

I have looked at closet organizers and just decided on a nice bookshelf to put rods on a 10' closet. Given the width of the bookshelf I am thinking of mounting it to the wall to give it the height ...
1
vote
2answers
42 views

Will 12“ studs work for a TV mount designed for 16” stud mounting?

I've moved into a new location and I have 12" studs rather than the 16" studs my TV mount was designed for. The TV mount comes with lag bolts (M8x55). Getting the lag bolts and pilot holes drilled ...
1
vote
0answers
38 views

How should this vintage wall-mount sink be mounted? Does not fit standard cast iron brackets

I'm planning to wall-mount a vintage 'Standard' victorian cast iron sink similar to the one in this question: Antique Cast Iron Sink Wall Mounting Support and Weight Issues?. That sink has two bolt ...
1
vote
1answer
49 views

Mounting TV on metal studs?

The wall contains metal studs 24 inch apart. On a previous TV, I installed an articulating TV mount (80lbs total with mount) on two metal studs with 4 snap toggles (that's 2 snap toggles per metal ...
0
votes
2answers
290 views

Mount metal letters to a wall so that they are removable

I have to mount some metal letters to a concrete wall. Until now the plan was to ad pins to the letters and glue them into the wall. This would have required making some holes in the wall. Now the ...
0
votes
1answer
21 views

Where can I find a replacement bracket for my glass counter top?

Sorry if this is obvious but I'm having a hard time contacting the manufacturer so I wanted to ask here. I'm trying to replace my mounting brackets on a bathroom sink I have and was wondering if ...
1
vote
1answer
24 views

How can I install an air conditioner in a window with a very deep exterior ledge?

Our NYC apartment building has very deep exterior ledges, extending around a foot beyond the window, but 2-3" below the window frame, so a window AC can't rest flat on it. How do we appropriately ...
0
votes
2answers
33 views

How do I remove molding with out damaging the molding or the wall?

I am installing wood flooring in my bathroom and want to remove the molding without damage.
5
votes
3answers
34k views

How do I hang a shelf without drilling holes?

I'm currently living in a house in which we have clear instructions not to drill through the walls for danger of asbestos. I purchased a small projector and would like to mount a shelf to the wall, ...
1
vote
2answers
78 views

How to hang a TV on a drywall with no studs and no room for toggle bolts?

I am hanging a TV in a narrow wall space that has no studs behind it. I have verified there are no studs behind the drywall by using two different stud finders (a cheaper and a more expensive model). ...
3
votes
4answers
83k views

How can I mount a TV when I can't find studs inside my wall?

WARNING: I'm not the greatest handyman. I bought a TV mount the other day, expecting to hang my heavy 40" TV above the fireplace. However, the instructions specifically say to first screw the mount ...
0
votes
0answers
12 views

Removing molding in space above mantel

There is a space above my mantel that has a molding trim that is 39 x 56. I would like to hang an art piece here. How can I remove this trim without damaging the walls. Also the space sounds hollow as ...
1
vote
0answers
39 views

Mount pegboard to wall

I am attempting to mount a pegboard(the type you climbed up in gym class http://www.roguefitness.com/rogue-pine-maple-peg-board) to a drywall covered wall. Originally I thought lag bolts into the ...
3
votes
2answers
381 views

TV mount is 16.5“ wide but stud centers are 17” apart. Is it still safe to mount?

I am not able to install the mount by positioning it on the exact center of the studs. Is it alright if the holes are slightly off-center on the studs? The mount I am installing is this one, and my TV ...
1
vote
2answers
3k views

Mounting TV on Plywood over Window

I need to mount a TV over my window. It is a 70" TV and weighs 96 lbs. I was thinking of using the framing of the window, there are 2 studs that are 54" apart. I included a diagram of my idea but I am ...
1
vote
2answers
34 views

Question on installing ski rack on on 36" wall space

I am trying to install ski rack on 36" wall space backed by 2 studs. To utilize maximum space, I think putting 2x4 wood board on wall fastened to 2 studs, and install ski rack on top of the board. ...
3
votes
3answers
78 views

Anybody have experience in hanging a huge clock?

I need help with hanging this giant clock on the wall. Its huge and heavy. I believe its 4-5' in diameter and it weighs about 160 pounds. I figured building some sort of brace for it would be best as ...
2
votes
1answer
47 views

Making a fake wall to mount a tv, easy as it seems? will the fake studs be able to carry the same weight?

The fake wall is strictly aesthetics but there are 5 studs on the actual wall, then we will be attaching 5 more "studs" kinda like this. But it will be from the floor to around 3/4th of the actual ...
3
votes
1answer
270 views

Mounting a window air conditioner on top of a sliding horizontal window

I need to install a window air conditioner in my master bedroom. However, the only suitable window there is a horizontal sliding window. To complicate things more, I need to place it on top, since my ...
1
vote
2answers
127 views

I need to Mount a 55" Sony TV on a Wood paneling wall w/no studs

My wife and I rent a duplex in an old neighborhood of Honolulu, HI. We have talked about mounting our 55" XBR-55X810C Sony 4K TV since we bought it, and yesterday we bought a mount on a whim. It's a ...
4
votes
1answer
26k views

How can I mount a security camera on the outside of the house?

I'm tasked with mounting a security camera on the outside of the house and I'm not sure what would be the right way to do this. There are two basic problems: how to mount the thing and how to run the ...
0
votes
1answer
54 views

What's this bracket?

Has anyone seen this type of bracket before, or have suggestions on what it might be called? The drawing is upside down for the intended usage - basically I want the U-shaped piece on the underside of ...
9
votes
4answers
20k views

Should I be worried if I missed the studs while mounting my TV?

I think I missed the studs based on how easily the drill moved through the drywall. My LCD only weighs 27lbs and the mount itself is 5lbs (rated to hold 165lbs, and uses 4 8mm lag bolts). I pulled as ...
0
votes
0answers
23 views

Mounting Cast Iron Brackets

I have a cast iron bracket to hang on a 4 x 4 wood post. The bracket weighs about 7 pounds and will extend out about 17 inches and the part that will be screwed into the post is 9" long and has 3 ...
1
vote
2answers
399 views

Attaching a heavy item to a 'powdery' external wall

I have a house in the UK built circa 1870. The external walls are London brick in Flemish bond I think, and are in a single layer (no cavity wall construction). At some point many tens of years ago, a ...
0
votes
1answer
22 views

Possible to make suction cups work again after being unused for a few years?

In the shower of my old apartment, I had a shower caddy with suction cups mounted in my shower. I then moved to a new place, and the shower caddy was never remounted in the new shower. After being ...
3
votes
5answers
4k views

Can I use 2x4s to extend studs so I can mount my TV?

I need to mount my 55" TV to the left of the studs. Can I do this simply by running a couple 2x4s off the studs, and then connecting the mount to the 2x4s? While I imagine this can be done for lighter ...
1
vote
1answer
53 views

Will my wall stand up to fairly heavy pine planking on the inside?

I have just purchased yellow pine tongue-and-groove lumber for the interior of my home. As I moved the wood in 16' lengths into to house to acclimate, I noticed the extreme heaviness of each piece. ...
0
votes
1answer
78 views

What's this stud type called and how should I drill for hanging a heavy item?

I just moved into a new house and doing my research, learning and planning before hanging a mount for a 40lb TV. I have a Mantel Mount, which is basically a lowering mount to be hung over the ...
3
votes
3answers
100 views

Need advice on how to make a projector screen fit into an area

We have a projector screen that can easily be lowered or raised electronically, whose top support is 113" wide, and whose physical edges are each 3 and half inches inset from the sides, so the screen ...
0
votes
1answer
52 views

Issue with older TV stand mounting hooks

I just bought a new TV that uses a smaller screw for mounting. My TV stand has these hooks that screw onto the TV and then the TV hangs from these hooks on the stand. If I bought smaller screws to ...
2
votes
1answer
45 views

Name of plastic piece

Where can I buy this plastic piece? Here is another pic: I need it to place it between these two metal rods so that the curtain will slide easier: Now I don't need this exact same piece but ...
9
votes
5answers
12k views

My house has steel “2x4s” in the walls, can I hang cabinets, a TV, or some other heavy item from them?

The question is pretty much all in the title: My house has metal "2x4's" in the walls. Can I hang cabinets or a TV directly on these metal studs? If not directly, is there something special I must do? ...
0
votes
0answers
30 views

TV stand size/weight restrictions

My tv stand says up to 55" or 110lbs, my tv is 65" but only 52lbs, would that be ok?
0
votes
2answers
91 views

Mounting a heavy (21 Kg) fan on a shed wall

I want to mount an industrial fan in my shed. Because of its dimensions, the only option seems to fix it on a wood beam that run around the shed near the top (see the red square on the picture): ...
1
vote
0answers
84 views

Giant magnetic something behind drywall/fireplace

I'm trying to mount a flatscreen TV above our fireplace that was converted by a previous owner (from wood?) to direct vent. During the process of finding the studs, I noticed that magnets stick the ...
0
votes
1answer
102 views

How to adapt caster wheel to tubular table leg?

My kids destroyed one of their tennis table caster wheels. Parts of the wheel mount are stuck inside the leg. Is there a way to adapt another wheel? For instance, mounting the wheel externally? I don'...
2
votes
5answers
424 views

How should I wall mount a TV with one metal stud and a gap between the drywall and exterior block?

I am mounting a TV on a wall (see photos). There is a 7/8 inch gap between the drywall and the exterior, and a single metal vertical stud (Florida) as indicated. I want to center the TV, which is ...
2
votes
3answers
69 views

Mounting a TV on the wall

I am trying to mount a 20 inch TV on a plasterboard wall. There are only two studs in the wall. One where I won't be able to see the TV and the other above an electrical socket. I do not want to put ...
1
vote
2answers
235 views

Can I use lag bolts when mounting heavy shelf units through 2 layer drywall?

First time posting here, as I haven't been able to find this specific question answered anywhere. I'm a novice and halfway through a garage storage project, and just discovered that I have double-...
2
votes
2answers
168 views

What type of anchor is this and what is the max capacity ?

I want to mount an item that is pretty heavy on the wall but the studs don't align with where I would like to mount it. Here is a picture I the anchor I am using (using two of them): What type of ...
2
votes
2answers
100 views

How to mount an odd mirror from Crate and Barrel

I have a mirror that we got from Crate and Barrel, but the backside of the mirror is not flush so it sticks out from the wall (and looks weird). Here is a picture of the backside. You can see the ...
2
votes
2answers
811 views

Pulley/winch knot for holding up heavy punching bag

I currently have a heavy bag mount I built from 4x4 posts to hold up a 100lbs punching bag. It currently has a nice swivel bracket holding it up, which has been working great so far. The only problem ...
9
votes
4answers
44k views

Can I hang a TV with one stud and drywall anchors?

I have read several questions on here regarding this topic but my situation is slightly unique. I have a TV mount that is about 20" wide. The studs in my wall are 24" apart. I am mounting a 55" tv. ...
2
votes
3answers
452 views

Mounting a TV wall mount to stud where A/C is detected

I want to mount my TV on the wall and just purchase a wall mount for it. I've done this kind of install before, but when I was using my stud finder, it is indicating that one of the studs has AC ...
0
votes
1answer
43 views

How can I mount a TV to the wall so that it folds away?

I currently have a projector that I connect to my Mac or to my XBox 360, and then project onto a screen that pulls down over a window. I now want to get a PS4, but the PS4 only has an HDMI output and ...
0
votes
2answers
126 views

What type of sealer/stain to use on untreated cedar 4x4 lumber glued together

I'm planning on making a heavy bench top by using six 4"x4"x6' posts, and gluing the faces together with Elmer brand carpenters glue and several large bar/trigger clamps. Afterwards, I'll just ...
0
votes
1answer
496 views

How do I safely install a mirror on an Ikea Besta door?

I have a Besta unit for shoe storage. It makes sense for us to put a mirror in that room, and the door seems a good spot. The door itself is about 25" x 50". Standard Ikea Tofta pressboard door with ...
3
votes
3answers
7k views

How do I secure a one-armed toilet paper holder, which constantly slips off the mount?

I have a toilet paper holder attached to a tile wall with a single finger bracket (per the manufacturer). The holder constantly slips the finger bracket, goes loose, and leans to the side. The ...
0
votes
4answers
370 views

How can I mount a speaker on the ceiling?

I want to this heavy bookshelf speaker on my ceiling as a center-channel, preferably horizontally, as it's above my projection screen. I want to angle it roughly 20 degrees downward so that it's ...