Attaching something to a wall. If you're using this tag, your question is probably a duplicate.

learn more… | top users | synonyms

1
vote
2answers
106 views

Mount metal letters to a wall so that they are removable

I have to mount some metal letters to a concrete wall. Until now the plan was to ad pins to the letters and glue them into the wall. This would have required making some holes in the wall. Now the ...
0
votes
1answer
214 views

How do I safely install a mirror on an Ikea Besta door?

I have a Besta unit for shoe storage. It makes sense for us to put a mirror in that room, and the door seems a good spot. The door itself is about 25" x 50". Standard Ikea Tofta pressboard door with ...
0
votes
2answers
37 views

Options for external “boxes” (like tivo) with wall mounted tv

I see there are plenty of questions regarding how to mount a tv in the wall, and what to do with the cables as far as running them behind the wall - but my question is a little different I think. ...
1
vote
2answers
56 views

How to hang 1/4" Plywood

I have a 12" x 24" piece of plywood that is 1/4" thick and I'd like to hang it on the wall. I don't want to frame the piece or put any nails in it. Here are a couple of ideas I had: I was hoping ...
0
votes
1answer
33 views

What is the most solid way to mount floating shelves?

I want to install a series of floating shelves to hold mostly books and some other heavy items in my living room. I found this on Instructables where one use expansion bolt and 6mm thread bar for ...
0
votes
1answer
18 views

Doubling the size of a closet with two rods

The closet currently contains one 48" rod, two flanges and two 1" wooden piece to support a shelf. I'm thinking of moving this one higher and installing a second rod lower to double the space in ...
2
votes
3answers
67 views

Get free-spinning bolt out of TV?

I am trying to remove an HDTV wall mount from the TV, but: a handyman tightened one of the bolts overzealously, and now it's stuck. Specifically: The bolt turns freely, but does not reverse out of ...
2
votes
2answers
43 views

Mark 2 points on parallel walls directly opposite each other

I am about to mount some steel pipe which spans from one wall of a room to the opposite wall. (Here's why: Mount Pull-up bar from wall to wall) How do I accurately mark two points on facing parallel ...
2
votes
2answers
99 views

Mounting Full Motion Mount on a Single Stud

I've seen this question regarding a sheet metal stud, but my plan and situation are a bit different. I am curious if ananyone thinks this sounds secure: I have a full motion flat screen wall mount ...
1
vote
1answer
168 views

Can I hang cabinets and shelves on metal studs?

I recently moved into a high rise apartment and need to hang some cabinets. The cabinets themselves weight about 20lbs and I'm thinking the stuff stored inside them will be around 40lbs. I know I ...
5
votes
5answers
5k views

How can I hang heavy objects on a wall, without leaving any marks?

Command Hooks don't hold very much weight wise and I would like to mount heavy objects - e.g. a whiteboard ... any ideas? (yes this is drywall - I cannot leave any marks in it ). context: college ...
2
votes
1answer
71 views

Drill getting stuck about two inches into stud

I'm trying to mount my flat screen. I found a stud using a stud finder and can definitely feel that I'm drilling into the stud but about 1.5-2 inches in, the bit gets stuck. I proceeded with ...
1
vote
1answer
36 views

How to install acoustic panels on a door?

I want to add some foam acoustic panels to a wooden (interior, roughly 30x80 in) door - they are roughly 12x12x2 inch squares, and quite light, to the point where I think double-sided tape would be ...
1
vote
1answer
128 views

What type of adhesive should I use to attach metal to vertical tile?

I'd like to attach a magnetic, metal knife rack to a tile splashback in my kitchen. The tile is glazed white and the attachment points on the rack are small (about 0.9 sq in of metal). The rack weighs ...
1
vote
1answer
97 views

Can I mount a 60" TV and mount weighing a combined 95 pounds to a drywall or plaster? [duplicate]

I cannot find studs on my firewall but, when I drilled a hole on the wall, it seems to me that either the plaster or drywall was thick enough (like 1/2"). Can I Mount a 60" TV and Mount Weighing a ...
2
votes
1answer
120 views

How do I mount a flat object on a rounded roof tile?

My objective is to mount the plastic (Home Depot) owl in the 1st image below (flat underneath) at the end of the roof in the 2nd image. Although you can't see the roof in the image where it will mount ...
3
votes
1answer
89 views

How can I mount a shelf above a closet door?

I would like to mount a wall shelf above a closet door in a small bedroom. I was thinking about using the Ikea Ekby shelf, which is 59" long (exactly the length of the sliding doors of the closet). I ...
1
vote
1answer
56 views

patching hole to be reused

I'm trying to mount a tv into my chimney walls. My TV is 65" and weighs in about 65"lbs or so. I drilled in 6 holes. 3 at the top 3 at the bottom with about 12" apart. I was going to use the strap ...
3
votes
3answers
1k views

How to attach metal knife rack to tile without ruining tile?

I'd like to attach a magnetic, metal knife rack to a tile back splash in the kitchen of my rental apartment. The tile is glazed white and the attachment points on the rack are small (about 0.9 sq in ...
4
votes
3answers
332 views

Is it OK to install a TV mount when it can't be attached to a stud at all mount points?

I have a TV wall panel that can only reach two studs. I was wondering if it's fine to screw the left side and the center on studs, and have the right side anchored in the drywall. My TV is 30lbs with ...
1
vote
1answer
381 views

Will using concrete anchors in wall studs cause problems?

While installing a wall mount for a 48" TV, I realized I made a mistake. I drilled a ⅜ pilot hole in the wall stud and then installed the anchors provided with the mount that the lag bolts would be ...
1
vote
1answer
348 views

Why can't I drill deep enough into my wall for wall anchors?

I am living in a condo and have a problem to put anchor in the wall (drywall? I don't know th exact type of the wall). when I drill it doesn't go deep enough to put anchor completely in, so it can't ...
0
votes
1answer
163 views

Can I drill/rivet into my Fridge?

I would like to attach a clasp/latch to the side of my fridge/freezer, so that I can tell when it is closed at a glance, and to make closing it a concious effort. The fridge is from some time in the ...
2
votes
1answer
3k views

How can I mount an LCD TV onto the *wall* of an RV?

I have an RV and I want to mount a flat panel LCV TV onto the wall of the RV. Most people who put LCD's into their RVs put them up above the driver where wooden cabinetry exists, but I do not want to ...
3
votes
4answers
517 views

How can I hang a 250 lb wooden piece of art on the wall?

I have 3x8 Brazilian Cherry timbers cut with tongue and groove that stack on top of each other to make a very large wooden piece of art to hang on my wall. I have all of the pieces glued to each other ...
2
votes
4answers
85 views

Dry wall, mounting 13KG whiteboard

So I just bought a 1800mm by 1200mm whiteboard for my study and what never occurred to me (stupidly enough) is how to mount this thing to a drywall. It has obviously came with x8 raw plugs and x8 ...
5
votes
1answer
96 views

Can I route coaxial cable for tv through a gas fireplace?

Cable guy told me to drill a hole from outside in right through sheet metal in gas chimney to connect tv to cable mounted on mantle?
1
vote
2answers
139 views

Mounting TV on Plywood over Window

I need to mount a TV over my window. It is a 70" TV and weighs 96 lbs. I was thinking of using the framing of the window, there are 2 studs that are 54" apart. I included a diagram of my idea but I ...
0
votes
2answers
67 views

mounting a hand held shower bracket to drywall

I need to mount a vertical rod that will hold a handheld shower head. There are two brackets. The lower one will go into the fiberglass shower stall. No sheet rock behind it, no stud. The water ...
6
votes
2answers
6k views

Can metal studs support a 64" plasma TV on a swiveling mount?

Alright, I need a sanity check here. I've been tasked with mounting a 64" plasma TV with an articulating mount onto a metal stud wall in the corporate boardroom. It's the quadruple-threat with no room ...
1
vote
2answers
542 views

How can I support a desk without legs or brackets

I plan to build a floating desk with the following dimensions: 75"-79" long and 22"-24" deep. I plan to mount it to concrete wall(see Image). My Preferred material is MDF. The desk intended for use ...
1
vote
2answers
80 views

How to attach mounted flat-screen TV to the wall so that it lines up perfectly?

As you can see the TV in the following pictures has been attached to the wall behind it but it does not line up in a straight manner with the furniture below it (the piece of furniture is perfectly ...
1
vote
1answer
60 views

Where can I get flexible ferrous/ferritic strip? [closed]

It is easy to find narrow flexible strips that are magnetic on one side and sticky or smooth on the other side, commonly used to turn any object into a fridge magnet. What I want to find is the ...
0
votes
1answer
183 views

Side mounting (base attachment only) of glass railing panels to wooden house frame. Requirements?

Background I'm trying to design/install a custom glass railing in my home. Here is my design concept: It consists of a 13' span covered by 12' (4 pieces 3' wide) of railing with an aluminum ...
1
vote
3answers
97 views

How can I mount a clock on tiles?

My father likes to have a clock in our bathroom. Currently, it looks like this: As you can see the clock is already damaged because we need to move it all the time when we want to open the window. ...
1
vote
2answers
1k views

How to attach concrete to wood?

I'm planning a wooden table with concrete legs. I will use a U-shape or O-Shape for the legs. Should i use screws to attach the legs to the slab or is there a better way? I thought of placing a metal ...
0
votes
1answer
172 views

Mount Pull-up bar from wall to wall

Walls are 7-feet apart. For the bar, I am using metal pipe about an inch two inches in diameter. What is the best way to mount an end of the bar to the face of the wall? (PS: Very similar question ...
0
votes
0answers
55 views

Can a 61-lb speaker sit on a shelf screwed to pine wood paneling mounted directly over masonry?

I'm trying to create more room for guests. If I raise my speakers up, that's 2 more people. But they are 61-pound speakers, and would injure someone if they fell. [So, while not important for ...
0
votes
3answers
864 views

How should I mount a TV to a wall that slants inwards 8 degrees?

I am going to attach a piece of plywood across 3 studs and then attach the mount to the plywood, as described in the answer to Studs not in right place for mounting TV. Can I use 2x4s to extend them?. ...
0
votes
2answers
67 views

Any way to mount this diffuser without screws?

I needed to unmount a drywall ceiling diffuser to do a small fix. The diffuser is a "traditional" stainless still box mounted using two screws driven straight into the sheetrock. Unfortunately the ...
3
votes
2answers
130 views

How can I mount an electrical box to exterior foam board?

I am trying to replace an exterior light fixture next to my home's main entry way: The original light was mounted to a low-profile bracket that was mounted directly to the PVC "box" shown in the ...
1
vote
0answers
187 views

What could I be getting stuck on when drilling into a stud?

I was trying to drill a hole for bolts for a TV mount, using a 7/32 bit. About 1" in, the drill wouldn't go any further. It as was in the middle of where my stud finder indicated a stud (but it was ...
8
votes
4answers
15k views

Can I hang a TV with one stud and drywall anchors?

I have read several questions on here regarding this topic but my situation is slightly unique. I have a TV mount that is about 20" wide. The studs in my wall are 24" apart. I am mounting a 55" tv. ...
1
vote
2answers
77 views

How do you secure pre-built garage shelving to the frame?

We have built the typical free-standing 4-level garage shelves(similar to this) & want to secure it to the house frame in the garage. The whole thing is pretty sturdy but we just want to be safe ...
1
vote
3answers
1k views

How can I mount a 2" mast to the side of a utility pole?

I need to mount a 2" diameter mast to the side of a utility/telephone pole and am having trouble locating a mounting solution/hardware that will work. My big problem is that I'm not sure what the ...
3
votes
3answers
207 views

How can I build a table into an alcove?

I have this weird portion of a second bedroom where about 4 foot of it is 2 feet deeper than the rest of the wall. What I want to do is fix a butcher block in that space to use as a desk. What is ...
0
votes
1answer
77 views

wall mounted table/desk, i've my calculations now what

long story short that i need to build a wall mounted table/desk, i've done my calculation (full stress analysis) and i've moved all forced to the mounting points but now im stuck because i don't know ...
3
votes
2answers
238 views

How can I mount heavy stuff on wooden studs?

I want to replace my kitchen cabinets (shoddy DIY stuff, very rough) with some nice floating shelves. I tried to find information on how to mount heavy stuff to wooden studs but all I found were ...
1
vote
1answer
153 views

Mounting a TV on a chimney breast

In our new house the master bedroom is on the upper level and has a chimney running through the room from the living room below. It's painted brick and all 4 sides are exposed (you can walk around ...
0
votes
1answer
157 views

How to mount a pull-up bar to drywall on resilient channels?

I'm trying to mount a pull up bar on a drywall. The wall is shared with another unit though,so there are resilient channels behind the wall, and so the studs are offset from the dry wall sheet. What's ...