I am preparing to put down cement board for a bathroom tile install. I understand, I need to tape at the seams. Should I tape the edges where the cement board meets the drywall or the tub as well? ...
I just installed some 12" x 24" large format tiles in my laundry room using Flexbond mortar over concrete that was machined with a diamond cup disk. Its been ~32 hours since I finished the main ...
18" tile part adjacent to toilet and under the flange cracked during toilet install (plumber). first try result: replacement tile is too high, i I had to remove it. Complication: tile rocks due to ...
We have a small area of concrete foundation that we need to patch and level prior to ceramic tile installation (12×12 tiles). It is concrete that we chipped the old tile mortar off of, so there are ...
I will be tiling a tub/shower area using 8x10 ceramic tile with glass mosaic tile accent rows. I see about half a dozen varieties of thin-set on the market: Weights: - 25lb - 50lb Types: - ...
I'm just getting ready to lay down the grout after successfully tiling our master bathroom. I've been told in no uncertain terms that I must remove the spacers between tiles (or else grouting over ...