My home interior walls are thick redwood paneling in the bay area mountains. i'm about to start removing the wood in my second bedroom and want to install a moisture barrier on the 1 outside wall of ...
I just bought a 50 pint dehumidifier for my basement. What humidity level should I aim for? This time of year the outside humidity is very high (over 80%) and we do not have central air. Right now ...
I have an exhaust fan in my master bathroom and also a wall heater. I like to run the heater without the fan running during my shower so that the room is nice and warm when towel drying off. I then ...
we remodeled a trailer home recently, removed the aluminum siding, put up osb in place of the siding, then used the Lowes brand of house wrap. we installed new vinyl siding over that without using any ...
See also How do I install electrical through stucco which deals with the old work situation. What are the best practice products and procedures for installing an exterior light, on a wall that will ...
Question: Do non-load bearing basement walls with metals framing and foam insulation (such as extruded polystyrene) in a single-family home require fireblocking and draftstopping? If so, what is the ...
This is related to my other question about moisture barriers. There is an attic above the bedroom and there is insulation with paper backing in place. The attic area seems far more likely to get ...