I have a brick house built in the 1920s. I'm installing a bathroom basement based on an existing layout, but I'm trying to keep the "wet" side (mechanical room with hot water heater, etc.) physically ...
we remodeled a trailer home recently, removed the aluminum siding, put up osb in place of the siding, then used the Lowes brand of house wrap. we installed new vinyl siding over that without using any ...
I'm building a room into our (existing) barn; how should I best go about insulating it? The barn is a Morton building -- pole barn construction, metal siding. It's closed on three sides but open on ...
I live close to the water and there is a high water table around my house. Therefore a lot of water vapor passes through the basement walls. I would like to be able to store stuff in my basement and ...
I installed some new OSB flooring in my attic. The area it covers is about 160 sq. ft. The total area of the attic is about 750 sq. ft. There is just blown fiberglass up there, and there is no vapor ...
My home interior walls are thick redwood paneling in the bay area mountains. i'm about to start removing the wood in my second bedroom and want to install a moisture barrier on the 1 outside wall of ...