I'm going to be cutting 1x6 oak planks with a miter saw, but I'm not sure what blade to use. I currently have a 24T blade in the saw (which I know for sure I don't want to use), since I usually use it ...
I will be adding moulding and trim to a few rooms after I lay laminate flooring. I have already done this in one room and I was really discouraged with my miter cuts. In most corners, I had a gap of ...
What is the best way to calculate the angle that crown moulding should be cut in the compound miter saw to fit an inside corner?
I'm going to be joining 2 1x6" pieces of wood at a simple miter joint. However, I want the top edges to be rounded over. I'm planning to use my router and a round over bit to soften the edges, the ...