1
vote
1answer
236 views

How can I remove a dead bolt?

I'm trying to remove a 16 yr. old Titan Dead Bolt. I have it disassembled but cannot get it out of the door. There is no strike plate on the door that I can remove. There is only a brass ring that the ...
0
votes
0answers
27 views

Privacy lever on door not locking

The door handles on a number of my rooms do not seem to lock. They're all privacy levers with turn button on the inside and emergency key on the outside. I believe they are the Galiano model by ...
0
votes
1answer
126 views

Weslock Double Locking Deadbolt Impossible to Remove from Door:

I have an old Weslock double-locking deadbolt which is dying a slow death. After removing the outer mechanism, I attempted to remove the inner mechanism simply by tugging. But I've pulled on it so ...
1
vote
3answers
335 views

How to drill a hole in the wood without an electric drill?

During a travel in Laos, I need to drill some holes into a double-door's wood to install a locker. The wood is rather hard, and I don't have an electric drill (and can't find it). I only have 2 small ...
1
vote
1answer
106 views

Can someone unlock a locked door and lock it back again without the key?

Is it possible for someone to unlock your front door get into your house and then lock the door again without being supplied with a key?
2
votes
1answer
152 views

What kind of (1950s era) lock is this

My home, built in the late 1950s, has these cute little additional locks on top of the main doorknobs to many of the interior rooms. I can't seem to find the correct term for these locks, which would ...
4
votes
1answer
614 views

What is the name of this cast metal part inside my lockset?

I have a Baldwin front door lockset that doesn't completely retract the latch when using the thumb lever. The handleset is similar to this: model After dismantling the thumb latch assembly, I ...
4
votes
2answers
376 views

How can I install modern locksets on these interior doors?

I've recently bought my first house which I'm very excited about, got into the decorating phase and decided to replace the door handles - some of which were damaged - with nice new ones. Being a ...
1
vote
2answers
3k views

How can I make a copy of a door key without a matching blank?

We have an old numbered key, that looks like a regular key, but it seems it is numbered, so the locksmith refuses to copy it without our landlord coming with the original. Our landlord would ...
3
votes
2answers
9k views

How do I fix an exterior door knob that will unlock but not turn?

My back door (which is only two years old) has a door knob that recently suddenly stopped turning. I can lock and unlock it, but it just won't turn. Here's a picture of the inside of the door knob: ...
2
votes
1answer
852 views

Why did my locked door open by itself?

Why would our front door have opened by itself? It was locked. It has an entrance set - a latched, not deadbolt, knob handled, keyed on the outside and turnsnib on the inside style lock. We have had a ...
1
vote
0answers
128 views

Searching for biometric fingerprint door lock/handle with interchangeable core [closed]

The company I work for is wanting to install a bio-metric fingerprint and keypad door lock with handle on the door to our new office. I am having difficulties finding a door lock that meets certain ...
1
vote
0answers
232 views

Where can I find a replacement 3" drilled split spindle with a hook at the the end? [closed]

I have an old RH&CO mortise entry lock and the drilled, split spindle is broken. I cannot seem to find the 3" drilled split spindle with a hook at the end anywhere. I have tried local hardware ...
7
votes
4answers
3k views

How can I fit a Schlage lockset in my front door?

I moved into a condo with a Kwikset lockset in the door. I wanted to replace it with a Schlage lockset, but the actual bolt portion of the deadbolt was too large to fit into the pre-drilled hole. If ...
3
votes
1answer
804 views

How can I remove a Mortise Lock and deadbolt from a door?

I got an old door from a junk yard that I'm trying to reuse. The door is going to end up being sliding barn door so I have no use for its existing door knob and lock mechanisms. From what I can tell ...
1
vote
1answer
543 views

Push button lock unlocks when knob turned

Recently my bedroom lock (a push button lock) has been acting funny. It's hard to push the button in and the button and handle sort of need to be jiggled to push it in all the way. Once it's in it ...
2
votes
2answers
346 views

Are there any simple electronic door locks available?

I have an office door I need to keep locked but allow easy access. It doesn't have to be super secure, it has a proper deadlock for when we are closed, it just has to stop people casually walking in. ...
2
votes
1answer
346 views

What is causing discoloration on my bronze-finished lockset?

We bought a bronze finished lockset about five years ago, and now a lot of it is ashy looking and green in some places. It looks a little worse every year. It's on an exterior door facing west. ...
2
votes
2answers
1k views

Where can I get a new key for an old lock?

There are two locks on my apartment door. The key to the bottom lock was lost long ago - before I moved in - and we now just use the top lock. The bottom lock is probably 50-60 years old and ...
2
votes
3answers
12k views

How to remove a stuck key?

A hypothetical question - if I get a key in the door lock from one side of the door, could I somehow use another key to open the door from the other side? And what if you could "engineer" the stuck ...
5
votes
5answers
1k views

Home wireless lock

How can I improve my home with a kind of front door lock that would act like those car that can unlock when it receive signal of the key in your pant? My goal would be to keep my keys in my pant ...
3
votes
4answers
9k views

Why does my latch not retract when I push or swing the door shut, but will retract when the knob/lever is used?

This just started today. I have to turn the knob in order for the latch to retract. Before, I could just push to door shut and the latch would retract when it hit the plate on the door frame. But now ...
2
votes
1answer
358 views

what parameters should I look for when choosing an electric deadbolt?

I am looking for electric deadbolts for external steel doors - to place several of them on a door - one on each side (top, bottom, left, right) for extra security. I want to buy just the deadbolt ...
7
votes
2answers
318 views

How long do batteries typically last in electronic deadbolts?

I'm considering getting a Schlage Plymouth Keypad for our front-door but was curious how long the 9V battery typically lasts. The web site says "3 year battery life" but I'm... skeptical. =) Has ...
2
votes
1answer
4k views

How do I replace mortise locks with bored cylindrical locks?

I purchased an older home that has mortise locks in all of the doors. They're all very difficult to use and some of them don't work at all, making the doors difficult to impossible to close. Since I'm ...
2
votes
1answer
3k views

How so I fix a loose Kwikset deadbolt faceplate?

We have a kwikset deadbolt on our main door and the faceplate has come loose. There are no visible screws on either side of the door, so I am assuming they are under the brass plate on the inside of ...
7
votes
5answers
2k views

Is it worth having two locks in exterior doors?

I've noticed that some places have a lock in the knob and a deadbolt in the exterior doors, and some places have a knob without a lock and just a deadbolt. Is there a benefit to having a lock in the ...