0
votes
1answer
36 views

Convert light socket to plug socket for LED lighting strip

I have a european (Netherlands) light socket in my house that I would like to convert to a plug socket to accommodate an LED lighting strip. My builder says it won't work, but he's Polish, I'm English ...
0
votes
1answer
19 views

Is it possible to use a dimmable LED GU10 bulb on a non-dimmable circuit?

Is it possible to use a dimmable LED GU10 bulb on a non-dimmable circuit? I know you cannot use the opposite.
-1
votes
2answers
50 views

How to install LED strip where before I had a fluorescent tube?

I want to install a LED strip where once there was a fluorescent tube. I like to think myself as google competent but this time I could not find a satisfactory answer. Right now, in my ceilling I ...
1
vote
2answers
188 views

How do I wire LED lights directly from the panel?

I am finishing my basement and would like to do 2 sets of LED strip lights. One will go in a small 4x8 room under my stairs, another a large theater room 13' x 15'. I am a beginner when it comes to ...
-1
votes
2answers
110 views

How to control a dimmable LED light?

I was thinking of attaching a simple dimmable LED light strip to the ceiling of my room. Ideally the finished look is to have a 20 meter long strip fit around the ceiling nested and hidden from view, ...
1
vote
1answer
188 views

Can I increase the length of LED RGB 5050 tape?

I see that there are a lot of experts on this forum, so I believe that someone will be able to help me with small LED lightning project (I have bought/will buy all components on eBay). Currently I ...
2
votes
4answers
195 views

12V DC LED Dimmer

I would like to fit dimmable LED lights in my new bathroom Most solutions seem to involve a dimmer switch that chops a high-voltage AC supply, and a driver per light (often integrated into the bulb) ...
1
vote
2answers
231 views

How can I connect my LED strip lights?

I bought this white-only LED strip lights off amazon, and it has a DC jack. However, when I search on the internet, there seems to also be 4-wire cable and 2-wire cable. I'm asking this because I ...
0
votes
2answers
72 views

Led lighting. Extended lengths

I'm building in Thailand with limited local resouces and even less knowledge. 220v here. I want to run a min. 30m of rgb 5050 using a dimmer for the run and one power source if possible. (I could ...
2
votes
4answers
1k views

What do I need to know about LED strip lighting?

I've read a ton of various posts about different aspects of LED lamps, strips, comparisons with fluorescent and incandescent lamps, and I decided that I want to install LED strips to light my room. ...
0
votes
1answer
125 views

Is an electronic dimmer integrated with fan controls compatible with dimmable LEDs? [closed]

I have a Harbor Breeze Ceiling Fan and Light unit shown below. The unit supports changing the fan speed and dimming the light electronically via a remote control shown below. I am considering ...
1
vote
1answer
561 views

What kind of led strip should I use?

i looking forward to install LED Strips (Cool White) in my new home. But I am not sure what kind of LED Strips should I use. Till now I have read that I can use 5050 or 3528. In the photo the ...
1
vote
0answers
35 views

10-LED's 12V AC wired/looped to 120V 60H 74VA bl-wh [closed]

How can I wire them to a switchable plug in my home? Do I have to fasten each LED to a grounded metal panel like it was on the interior panel of an a t m machine I dismantled? (legally) I assure you! ...
1
vote
2answers
231 views

Can I use dimmable leds without a dimmer?

I recently bought "dimmable LED lights" without knowing exactly what this means. I did some research, and now I get it. A dimmer is required to regulate the intensity of the lights, for which I don't ...
1
vote
3answers
214 views

Multiple weak light bulbs vs one strong light bulb

I currently have a small room with a single CFL bulb at the center of its ceiling. The bulb lights up the whole room well enough. I encounter the problem though that when standing in front of the ...
1
vote
1answer
502 views

Why are my LED lights flashing when powered from an inverter?

I am running some 10 watt LED floodlights off a 12 volt battery and 230 volt inverter. The 10 watt LED floodlights are flashing on and off. I am also running 20 watt floodlights and they do not ...
2
votes
2answers
402 views

Practical limits of how many LEDs can you use to replace halogen 12V?

I'm gradually replacing halogen lights at home with LEDs. We have a couple of 12V rails with a 5x35W rating when using halogens. When using the same transformer with LED's, can I use the theoretical ...
3
votes
1answer
271 views

How to use LED lighting strip on ceiling?

In our living room, we have a single ceiling rose in the centre of the ceiling with a boring light fitting on it. I'd love to replace this with 4 led strips (about 2m each) running from the centre to ...
1
vote
1answer
491 views

Problem with GU10 LED bulbs tripping out power

I have had some re-plastering and re-decorating work done in my kitchen. I had a new light fixture installed which takes 6 GU10 type bulbs. When the light fixture was first installed I placed 6 LED ...
4
votes
5answers
710 views

Why will 26 1.2W 220V LED lights not work with an 800W inverter?

We live off the grid and have just installed 26 220V 1.2W LED lights. We are using 220V as the batteries are some way from the house and and thick copper wire is expensive. Everything works on the ...
1
vote
0answers
203 views

Will these blinking LED lights cause a house fire?

I recently replaced the some floodlamps with LED lights. The problem is some of the LEDs are blinking or flashing even though the switch is off. Some do not blink at all. It happens all the time. ...
1
vote
1answer
2k views

Can dimmable (triac) LED bulbs be used on a motion sensor switch without neutral wire?

I bought a bunch of these motion sensor switches. I also want to use these dimmable LED bulbs. The motion sensors do not have a neutral wire connector. My outlets only have a live wire and it would ...
6
votes
3answers
9k views

Why do my LED lights stay on, even when the switch is off?

I have two LED lamps in my corridor, and when I switch them off, they keep emitting light (not very strong, but it's annoying at night). What can it be? How can I fix it?
3
votes
1answer
252 views

Are there alternatives to a traditional dimmer switch?

I have just had some 230V GU10 LED downlights installed in my living room (by a professional) to replace a traditional pendant fitting. At the same time, we added a (mechanical) dimmer, however it ...
3
votes
0answers
224 views

What is a good PWM driver for LED lighting?

I am looking at lighting options for my new flat. I'm looking for any recommendations and suggestions for the components to power and control the LEDs. If we consider the main room (i.e. the open ...
4
votes
2answers
3k views

What does that mean if my LED light bulb starts blinking when I turned it on?

I have an LED light bulb: Philips 60W incandescent equivalent I've owned it for about a year and have been very happy with it. This morning when I turned it on, it started blinking. Not flickering, ...
3
votes
3answers
2k views

What can I do to avoid incandescent bulbs for my 3-bulb ceiling fan, yet maintain brightness?

My ceiling fan takes 3 candelabra (E12) base bulbs for lighting. The bulb slots are labeled 75W - 125V. The fan light is dimmable and I currently use 3 60w incandescent flame tips. I plan to ...
3
votes
5answers
12k views

How can I convert my under cabinet lighting from halogen to LED?

Our kitchen has under-cabinet lighting that uses halogen 20 watt G8 socket bulbs. With 15 bulbs in the kitchen that is 300 watts. I'd prefer to replace them with 3 watt LED bulbs. I've been ...
1
vote
1answer
313 views

What do I need to do to change from Halogen to LED?

I want to update a few rooms in my house from halogen to LED light. The fittings I already have are for the MR 16 style (2 pins). Having the ability to dim the lights is not important. I found ...
2
votes
3answers
3k views

How can I tell what dimmer switch to use with LED lights?

I replaced the halogen GU10 bulbs in my kitchen with LED bulbs... I'm really pleased with the results but as the bulbs I bought are dimmable, how do I know what dimmer switch I can use? I did try ...
1
vote
3answers
540 views

What is the simplest way to create custom decorative LED-lighting?

I have always wanted to build decorative lamps with LEDs (application example: imagine a model boat with Xmas lights). Is there a way (commercial, or custom-built) to power several LEDs, so that: ...
2
votes
1answer
978 views

Will a non-dimmable LED work if the dimmer switch is on full?

If a dimmer switch is fitted for the room but we get non-dimmable LED lamps (GU10), I know there may be flickering problems with dimming, but will they work fine if the dimmer is turned to max?
1
vote
0answers
530 views

What new technology replacements are available for incandescent globe light bulbs for the bathroom vanity light?

I have a bathroom vanity light fixture with a row of exposed globe light bulbs. They had been burning up recently, and I was wondering if there are reliable CFL or LED globe bulbs available as a ...
1
vote
4answers
334 views

How can I get High-CRI lighting for a small room?

I plan to replace a CFL lighting fixture in a small room (10' x 15'), due to its being too dim and giving less-than-perfect light. I'd like to install something that would give me 3500K light with ...
7
votes
4answers
15k views

What exactly is a PAR type LED lamp, how does it differ from R/BR type LED & CFL lamps?

I am in the process of replacing my incandescent bulbs with more efficient alternatives. My home is about 14 years old, I've owned it for a little over three years. It seems most of the bulbs that it ...
0
votes
2answers
2k views

Is the light quality of halogen/LED low-voltage recessed light actually better than an equivalent line voltage light?

When it comes to deciding whether to go with low voltage or line voltage, a number of sites are in essence saying: your initial installation cost for low voltage will be higher, but you'll get a nicer ...
1
vote
1answer
5k views

Why do my LED lights flash on cold start?

Whenever I flip on my dimmer switch, all four dimmable LED lamps flash on in unison, blink off, and then come on at the selected dim level. This happens even with the dimmer slider maxed out, so it's ...
14
votes
1answer
24k views

What do I need to install LED strip lighting?

I've been looking to install LED strips, either RGB or white for lighting and ambiance. It wouldn't be the main lighting of the room, so no necessity for high power LEDs. The perimeter of the room is ...
2
votes
3answers
762 views

How to reduce brightness of recessed LED?

I have recessed LED in the bathroom which is way too bright. LED is dimmable but I can't put regular dimmer in front of it since it has small switch shared with two other switches. Neither I need ...
3
votes
2answers
652 views

What kind of light can I install in a small, low-ceiling coat closet?

Our Northern California house has a small coat closet (really a hallway with 2 doors and hooks for coats) between our front entry-way and our basement. It's a tiny space: 3 feet wide, 5 feet deep, and ...
5
votes
2answers
3k views

What about a light switch in the closet?

Okay you guys I have next question. And like all good questions this one begins with a story. I was reading the post about a nick in a wire and read a couple of you mention that light switch in a ...
7
votes
2answers
1k views

How to find LED Christmas lights that look more like traditional incandescent bulbs?

We just bought some LED Christmas lights that are labeled 'warm white', but when we hook them up they look ugly in the light they emit and seem very blue in their color to me. The specific kind I got ...
3
votes
4answers
834 views

How can I light picture frames from the floor?

I would like to light up three picture frames with something from the floor. They will be behind a sofa so we wouldn't see them and the picture frames are about at 1.5 meter above the ground. I have ...
0
votes
1answer
362 views

Need LED lighting suggestions for a hobby spray booth

I am writing the plans to build a small indoor hobby spray booth largely used for aerosol acrylics and acrylic airbrush but possibly some aerosol enamels at times. I am using a range hood which ...
8
votes
6answers
15k views

Can I use an LED bulb in a 3-Way fixture?

Is it possible to use an LED bulb in a 3-way light fixture? Will all three work?
2
votes
1answer
286 views

LED undercabinet lights but 240v inputs

I have replaced a run of halogen under cabinet lights with 1w lights running of an LED driver. This string of LEDs goes under a run of wall cabinets over a worksurface. I have two smaller ...
6
votes
2answers
2k views

What are the pros and cons of LED vs CFL vs incandescent bulbs for outdoor lighting?

I'm planning to install some light on my balcony and was just wondering what would be the best choice of lamp. I live in a relatively cold climate, and the current temperature at night is around ...
3
votes
5answers
5k views

What are my options for replacing 50W GU10 lightbulbs?

I've been looking at replacing 50W GU10 halogen lightbulbs for something more energy efficient. Some people say that LEDs cannot give you the same light (even 10W LEDs), and to use 11W CFL instead, ...
11
votes
4answers
3k views

What are the pros and cons of LED lighting for home use?

I'm interested in installing LED lights in my home, and I'm having a dilemma between buying LED bulbs and rolling my own solution. I have some questions on how to DIY: How efficient is it? Single ...