I'd like to install laminate floor on top of Delta FL in my basement. The basement slab is not level, it slopes (from all directions) towards a floor drain (that, via a pipe, leads to a sump pump) ...
I have a concrete driveway and path to my front door. Much of it has become unlevel and I'm contemplating having it mud-jacked. However, before I do, I wanted to know how I could easily tell when a ...
I have a 10x13 first-floor room which used to be a porch but at some point was closed in by the previous owners, and sheet linoleum was glued down to the plywood subfloor. Unfortunately they didn't ...
This is a follow up question to my previous question about leveling a basement floor without losing the drainage. After the feedback I decided to use self-leveling concrete and cut (or form it in ...
In a bathroom remodeling project, I noticed the newly installed plywood sub-floor is flat but not level, which may cause issues when installing the shower and the sink cabinet (water evacuation and ...
Asked a question about leveling my floor here earlier this week, and one of the options suggested sounded appealing, but didn't contain enough detail for me (a not-too-handy, ...
My kitchen ceiling joists are old and at varying heights. I'm trying to make it level, or at least flat, in preparation for drywall installation. Would you suggest installing strips of wood to the ...
I need to hang some drywall; my ceiling has a couple spots of uneven-ness. There's a few spots that are about 1/4" out of whack and another spot where joists+hanger are a little less than 1/2" down. ...