I want to connect the wiring from my shed into a junction box on the ceiling in the basement. I opened the box to see what I was dealing with, I figured it should be simple, there is only 2 wires ...
I bought a junction box in order to splice three Romex together along the 2x4's in the ceiling of my (unfinished) basement. The box looks like this: When I bought it, I assumed that I could just ...
We are designing circuit runs for a ground floor of a house flooded by a hurricane and it is best to use a few junction boxes to run the circuit branches. One reason for the junction boxes is to keep ...
I am trying to add a light fixture to a room. I have access to the studs in the wall (new wall being added to the room), but the ceiling is drywalled. There is no attic access. Unfortunately, the ...
In my dinning room, I have this: There is a wire run going up through the floor from the basement. It then goes outside the wall, around a stud (or studs, I'm can't tell there is more than one), back ...
I've found the knockouts in NM boxes hard to fully open. I've had trouble with both Carlon boxes and Madison Smart Boxes. The plastic molded to make the knockout is very resistant to actually being ...