I want to chain 6 Edison Lights They are a Standard Edison base, E26 medium, 120 volts. I am going to be hanging them on a 18 gauge wrapped copper wire. I am wondering how to wire them together and ...
I have been working on finishing my basement and am starting my rough in electrical. I am learning as I go and have gotten most of the basics down.. calc load, box size, stapling, supports etc. One ...
I needed to splice a wire to repair nicked wire insulation, but I didn't feel like running to Lowe's just for a junction box. Instead, I used a regular electrical box. The wire comes up from the ...
I've installed a number of strip lights in my garage to replace the single incandescent fixture on the ceiling. They all use a 3-prong plug, not hardwired. I want to replace the incandescent fixture ...
When I had our breaker box rewired, I had the electrician run a few extra lines (disconnected in the panel into the attic). I now need to run one of them downstairs through a wall. Two questions: 1) ...
Is there a way without using junction boxes to simply splice in additional length of 12/2 NM-B cable? Can I use twist caps? I'm putting in a dog door and as it so happens, there is some 12/2 right in ...
I was up in my attic a few days ago, and I noticed a pretty ugly electrical junction that wasn't in a junction box. Here's the pic: Is this up to code? FWIW I live in north Alabama, outside city ...