The tag has no usage guidance.

learn more… | top users | synonyms

0
votes
1answer
8 views

Remove interior paint from carpet

I recently wanted to repaint an interior wall. I took many precautions to cover the carpet using tarps, tape, and newspaper. Despite all of that, I still managed to get paint onto the carpets and ...
0
votes
1answer
58 views

How to fix rough opening of closet door

I'm redoing our master bedroom closet and the original doors were 1970 type sliding doors. The rough opening is 65.5". All the bedrooms already had a face-lift with wheat oak bi-fold doors and I would ...
3
votes
4answers
14k views

Product recommendations for clearing a drain connected to a septic system?

Our shower drain appears to be clogged and is draining slowly. What product can I use to safely clear the drain without damaging our septic system? According to Drano's site ...
0
votes
2answers
14 views

What is causing my laminate flooring to become warped?

Recently I've noticed the following in my laminate flooring: Apologies if the image is huge or unclear (I'm writing this from the Stack Exchange mobile app. In short, there is ripples/bubbles in ...
0
votes
1answer
108 views

New door in 47 inches wide corridor

I need to install a door in a corridor 47inches wide and 90 inches tall with laminated flooring.. The door we picked is 36x80... How to I feel the gap on the side and top to fit my new door? Do I keep ...
2
votes
1answer
1k views

Can I use cement instead of paint for interior walls?

I live in Mumbai (India) where clay brick walls are reinforced with concrete. On the interior part of these walls (inside the house), some layers of plaster followed by a layer of oil paint or any ...
1
vote
1answer
84 views

Strange White Box in New Apartment

I just moved in my new apartment and there are 3 small white boxes without any label. (There is also a separate smoke detector and a door bell system, so it shouldn't be that) This is how it looks ...
1
vote
6answers
31k views

What is the best/cheapest solution for poorly plastered walls?

My house is about 50 years old and many of the walls are plaster. If done nicely I would consider this a plus but it looks like my house was plastered/painted by a a 2nd grade art class. I don't ...
2
votes
6answers
416 views

Metal object encountered when drilling into wall above radiator

I was drilling through the wall (above the radiator, but not above any pipes or sockets) and hit something metal. I have drilled a tiny hole in that metal plate. It's not copper, looks silver. What ...
2
votes
1answer
152 views

How should I insulate an interior wall between a warm humid bathroom and a cold bedroom?

We're redoing the master bath. I'm wondering if and how I should insulate the interior wall. Bedroom is kept at 60F. Bathroom will be warm (radiant floor) and humid even if we have and run vent fan. ...
2
votes
1answer
44 views

Name of plastic piece

Where can I buy this plastic piece? Here is another pic: I need it to place it between these two metal rods so that the curtain will slide easier: Now I don't need this exact same piece but ...
7
votes
4answers
6k views

Is it worth it to replace hollow-core interior doors with solid core doors?

I bought a house built in 1970 which still has the original interior doors. They are hollow-core, boring, brown doors. I am debating whether to simply paint them white or replace them with new ...
2
votes
5answers
9k views

Can a gas fireplace insert heat an entire house?

I have a single-story 1400 sq/ft house (4 bedroom). Here's a VERY rough sketch of the layout: The house has blown-in insulation on the exterior walls but no insulation on the interior walls. ...
2
votes
3answers
2k views

How do I prepare doors to be hung?

Changing out interior doors in house. All of them. Going from brown crap to white 6 panel. I have two hinges on each door. Would like to buy new door with predrilled knob hole, cut it down ...
1
vote
1answer
229 views

How to adjust hinges on interior doors?

Putting up new interior doors in a house. I have a door that has probably a good 5/16" gap on the hinge side. The gap is wider at the middle of the door and closer to 1/8" on door top/bottom. Of ...
7
votes
3answers
6k views

Can quick-drying mud be used on the same drywall joints where slow-drying mud was used?

I think I phrased the summary/title poorly but essentially, I'd like to know if all drywall mud coats need to use the same type of joint compound for all coats or if I can transition to quick drying ...
0
votes
1answer
68 views

What should I use to seal the joints between two pieces of concrete backer board in a bathroom?

We had some plumbing issues in a bathroom that required us to open up the wall for the shower. That's been fixed but now I'm wondering how to seal the replacement piece of backer board. It'll be ...
0
votes
4answers
13k views

What should I use to seal around the perimeter of a tile floor?

I recently tiled our bathroom floor (nothing fancy - just a 7 x 5 room). In between the tiles, I've used a sanded grout and that's worked nicely but I'm confused on what to use around the perimeter ...
4
votes
1answer
5k views

What glass for an interior, mainly glass, wall?

We would like to install a small interior wall (say 3m long) with a wooden door. We want to make it out of large wooden beams with glass between them (there is already one such wall in the house, and ...
1
vote
1answer
67 views

What type of product can I use to hang wall art on bare wood that won't damage the wall?

I have an "outdoor office" with bare wood interior walls. I'd like to hang some wall art but I'm concerned about damaging the wood and/or leaving a lot of holes that I would have to patch later (and ...
1
vote
2answers
96 views

How can I stop a board from “leaking” sap?

I recently assembled a shed and one or two of the board on the wall are "leaking" sap: I thought it might stop after I removed the first batch but a few days later, it came back. Is there ...
1
vote
2answers
180 views

Can I add thin brick veneer directly to interior plaster

I have an interior plaster over wood-lathe wall that I'd like to cover using thin brick veneer. The plaster wall is generally in good shape (though some patching will need to be done for some ...
0
votes
1answer
88 views

why is there a concrete pole in my wall?

I broke open a section of wall I'd like to remove and there is a concrete pole inside!? Is this some kind of load bearing device? How can I know if I can remove it? Thanks
0
votes
0answers
25 views

How do I calculate the living area versus total area?

Is there a rule of thumb for the ratio of lving area to total area (halls, elevator space, etc.) in a typical hi-rise apartment?
0
votes
1answer
37 views

What type of product should I use to seal/protect the wood interior of a outdoor office?

I'm in the final stages of building an outdoor office (yay!). Here's what it looks like: The wood is supposedly "nordic spruce" according to the manufacturer. I'm planning to prime/paint the ...
0
votes
1answer
161 views

Fixing part of interior door jamb/frame

The bottom portion of my door jamb/frame to a bedroom was rotting, so in a pinch I remove the rotting portion (because of the terrible smell, and my kids were starting to pull at it). How can I fix ...
8
votes
3answers
39k views

What is my drill hitting and not penetrating when I hang curtains?

I'm living in an apartment. So far I've put up 2 sets of curtains and had the same troubles with both attempts. One set was over a sliding mirrored closet door (tacky!) and the other set was over a ...
2
votes
3answers
1k views

What is the proper/recommended way to tile a window sill in a shower?

I'm in the process of re-tiling my bathroom shower wall and I'm stumped on how to properly tile the window sill near our shower. Here's a picture: It's roughly 3 inches deep and 18 inches wide. ...
0
votes
3answers
495 views

Lifting mechanism for height adjustable sitting standing desk

I have put together a sitting standing desk and all but one part works. The bit I would like some advice on is how to dynamically raise the keyboard/mouse surface to switch between ergonomic standing ...
0
votes
3answers
3k views

What is the difference between “Input” and “Output” values on power adapters? Which one represents the amount of power being drawn from a circuit?

I'm trying to get a rough idea for how much electricity I consume in my home office. I understand that there are a lot of ways to measure this kind of thing: Turn everything else off in all ...
1
vote
4answers
12k views

dripping sound inside wall

I'll try to get everything in here, yet be concise. This is a 3-story building, plus basement/underground parking. I'm on the 2nd floor, studio. Same layout above and below. Exterior wall to ...
2
votes
2answers
245 views

How do I fill the hole caused by removing a door plate on a metal door jamb?

I recently got new doors and need to move the door plate on a metal door jamb. I was hoping someone had the know how on how to fill the hole that will now be on the door jamb from where the previous ...
0
votes
1answer
365 views

How to build a sliding wall section

A typical interior door is about 30" wide. Double doors (eg. French doors) could make that wider, up to maybe 60". But I'd like to build a sliding wall section, perhaps 90-120" wide in place of an ...
2
votes
3answers
330 views

Attach net/hammock to interior walls

Imagine a square room with four walls (12x12). Say you wanted to string a net across the area at a height of 6 ft, like a hammock. The net will be attached on all 4 walls, and it must support up to ...
2
votes
2answers
803 views

idea for mounting lcd tv on plywood

please suggest some ideas for mounting tv on plywood . I need to do clamp the lcd tv on the window. So i think it's better to cover the window using plywood first. After mount the tv on plywood . Is ...
2
votes
4answers
11k views

What is the proper way to remove plywood subfloor?

I need to remove old plywood subfloor from a bathroom (the flooring above it is already gone). What's the preferred/proper way to remove it without damaging the floor joists? One of the methods ...
2
votes
3answers
26k views

How should I apply brick to an interior wall?

I don't want to use veneer, I want to use real brick. Is it as easy as using tie-ins to the studs and setting the brick as one would normally? The existing wall is drywall, So I was thinking of ...
1
vote
1answer
200 views

How can I connect a bath wall spout intended for copper to a brass water supply outlet?

I'm in the process of remodeling a bathroom and am getting ready to tile the walls surround the tub/shower. I'm stumped on how to connect the bath spout. The spout looks like this: As you can ...
2
votes
4answers
2k views

What is the proper order of layers for bathroom walls?

Region: Santa Cruz, California, USA. I'm gutting a bathroom down to the studs and would like a reminder on the proper order of layers for them to ensure that it's moisture-resistant. As far as I ...
0
votes
1answer
72 views

How should I apply brick to interior wall? [duplicate]

I came across this question and I was wondering what ended up happening,real brick or brick veneer? I want to lay the brick over drywall on one of the walls(13x10feet)in the basement. I just wanted ...
2
votes
1answer
130 views

How can I magnify, intensify, and redirect the light from a skylight so that it is most effective?

My condo has a skylight about 6 feet above the interior ceiling. How can I magnify, intensify, and redirect the light so that it is most effective?
1
vote
3answers
2k views

Cutting a window to see your garage from within the house

I found this design concept that someone did of their house. They had cut a panel out of their house that allows them to see their garage which is a cool idea. Are there any projects out there that ...
2
votes
1answer
313 views

Interior Brick Wall

We have a 15x15 Interior wall and would like to use exposed brick, We have stained concrete floor 2x6 walls (This is new construction) We would like to use real brick or Pavers and split them in half ...
1
vote
3answers
832 views

How can I make a sunken electrical outlet line up with an outlet cover?

I recently replaced drywall in my bathroom but made the mistake of not checking to see if the existing electrical outlet boxes lined up properly. The result is that the electrical outlet box (and ...
0
votes
2answers
60 views

How should I paint around my newly hung doors?

I just replaced my old doors with some new pre-hung ones. Taking out the old ones ripped some of the thick paint off. Also, in some cases, the new trim doesn't reach to where the old trim was, so ...
0
votes
2answers
753 views

Is it normal for there to be a small gap between toilet tank and wall?

We recently replaced the toilet in our bathroom and I'm noticing a gap between the tank and the wall. Example: Is this normal? Our last toilet tank was flush against the wall. My concern is ...
0
votes
3answers
982 views

What pipe/adapter do I need to make this sink connect to this P trap?

I'm getting ready to connect a custom vanity to a P-trap and I'm not sure what kind of pipe/connection/adapter I need. The P-trap looks like this: (note that it won't be sticking out that far ...
1
vote
2answers
283 views

What shape/bends should a bathroom sink drain pipe have to generally comply with US code and avoid clogs?

Santa Cruz, CA, USA I think this question might be related to Under bathroom sink piping (exposed) but my question is more general so I decided to post it separately. I'm in the middle of a ...
1
vote
5answers
2k views

If walls and floors aren't exactly perpendicular, which side should I align tile with?

I'm getting ready to tile my bathroom floor and tub surround. Our house is older (about 45 years old) and the walls/floors aren't exactly perpendicular. With that in mind, I'm wondering if I should ...
1
vote
0answers
96 views

What do I need to do to extend the width of a doorway?

I want to make the doorway from my kitchen 39 inches longer opening the kitchen up to the living room. The door way that we have now is only 36 inches wide and I want to make it 75 inches wide. What ...