My Chinese die grinder has 2 collets for 6mm and 3mm tools. As far as I see, collets used in my grinder seem to be of "dead length" kind. If possible I would like to use it with my other tools of ...
Many times I used a chisel to cut off a hard-to-reach piece of lumber, I was wishing I had an adequate blade for my 4.5" grinder, as I don't own an oscillating tool. Why is it hard to find? Is it ...
Let's say I have a 1"-thick piece of wood. A 1 1/4" screw is driven through the wood, resulting in 1/4" of the screw protruding out the other side. What type of drill bit would I use to grind that ...
I am interested in the Black & Decker KG100 600W Angle Grinder because it is cheap enough. I will only use it occasionally for small scale do-it-yourself home improvement works. But, I really ...
I'm working on an old house with 2x8 T&G subfloor planks. All of the structure is sound and has been reinforced but there are areas where the edges of subfloor planks are not level. This has ...