I'm working on building a 10ft double door gate, with 1½" steel supporting frame and wooden 5½" pickets. I really don't want this thing to sag, or done incorrectly, so I want to make sure I get the ...
I am putting a gate across my driveway which is 14ft between posts on either side. Its going to be wood and all 1x6 and 1x8 lumber to keep weight down. Each gate will be about 7ft long so I was ...
I am a first time fence builder, which will be 6ft cedar. I need a gate that is 7 to 8 ft wide. I live in Oregon and the frost line is only a foot deep. I was planning on a 7ft gate with a 6x6 post. ...
I want to replace some fencing in the back garden. Ideally (if I can find it) I want to do this with Convex Pale Fencing. The fence is around 3 ft high x 6 ft wide, and I'll be using 3 panels ...
I want to attach a gate to a fence where the fence will be attached to a 2 3/8 in. metal post. What gauge should the post be for proper support? The fence will be a six foot wooden fence, as will ...
I have just built a 6 foot fence all the way around my property. To finish it offI need to build a driveway gate. The gate will be 15 feet wide and have two swing gate sections. I have used 4x4x8 foot ...