I'm working on building a 10ft double door gate, with 1½" steel supporting frame and wooden 5½" pickets. I really don't want this thing to sag, or done incorrectly, so I want to make sure I get the ...
I am a first time fence builder, which will be 6ft cedar. I need a gate that is 7 to 8 ft wide. I live in Oregon and the frost line is only a foot deep. I was planning on a 7ft gate with a 6x6 post. ...
The gate is 4ft high by 4ft wide for a garden path and is a standard quality metal gate, so not very heavy.
In the image, the single stack of breeze blocks on the right hand side has been slowly moving away from the wall over the last 4 years. The gate latch (also on the right hand side) is now rubbing ...
I want to attach a gate to a fence where the fence will be attached to a 2 3/8 in. metal post. What gauge should the post be for proper support? The fence will be a six foot wooden fence, as will ...
I have just built a 6 foot fence all the way around my property. To finish it offI need to build a driveway gate. The gate will be 15 feet wide and have two swing gate sections. I have used 4x4x8 foot ...