I need to buy ~25' of copper pipe to fix our badly kinked stove line. It looks similar to (but worse than) this pic: I won't be able to measure the pipe for a couple days and the guy at Lowes ...
I need to replace the flexpipe between my steel pipe and the propane insert. The one installed is too short. Alas, there wasn't a shut-off installed at the fireplace, so I needed to shut off the LP ...
Can I use 1/4 inch copper tubing with a compression needle valve to run propane to a gas light? I am worried that gas would leak from the compression fitting
I am an experienced DYIer and am starting my research on building my deck. I would like to plumb it for eight tiki torches, a grill and a smoker. I have experience plumbing gas, I plumbed my last ...
I am in the process of purchasing a home heated by propane..someone has removed the pigtail from the tank to the regulator..the tank fitting appears to be a quick disconnect type unfamiliar to me..the ...
I need to run a gas (LP) line from outside the house to a cooktop in the kitchen. Here's what I think I need to do: drill a hole in the exterior wall and the header (from the attic) of the same wall ...