1
vote
2answers
74 views

What material is used to fill cracks in wood that looks black afterward?

When looking in the more stylish furniture shops, they often have very large tables (e.g. 10cm thick x 1m wide x 2-3m long, made from one piece of lumber. Understandably, such pieces often have come ...
1
vote
1answer
113 views

Are pocket screws strong enough for a bed frame?

I've built a loft bed for my 4 year old following the plans posted here: http://ana-white.com/2012/07/plans/camp-loft-bed-stair-junior-height I modified the plans slightly to use a ladder instead of ...
1
vote
1answer
79 views

Reinforce chair stretchers with screws?

I have a set of dining room chairs and a table. Some of the chairs have their stretchers come loose. They were just held in with glue. Two years ago, I re-glued them and applied pressure with clamps ...
2
votes
3answers
192 views

How can I build a two-legged table?

I am building a rectangular coffee table and want to build it with two legs The table top will be 120cm x 100cm (approx 47x39inches). The table height will be 40cm (approx. 16 inches) the idea is ...
2
votes
1answer
140 views

Why did my third coat of polyurethane finish “buckle”?

I'm refinishing a table I built about 10 years ago. I put 2 layers of gloss polyurethane down and sanded between coats. All was fine at this point. I gave it another light sanding and put a third ...
1
vote
3answers
884 views

How to build disassemblable structure?

I'd like to build a largish (6' x 7' x 4') structure that can be assembled and disassembled on-site with only hand tools. I'm thinking about things like insert nuts, cam lock nuts, mortise/tenon ...
4
votes
1answer
3k views

How is a floating desk top supported against the wall?

Example of a floating desk top (courtesy of Phil Curtis): With increased height, it'd be one of simplest standing desk designs, and I am planning to do this at home. But, I am not sure how ...
2
votes
2answers
526 views

Which technique of wood joining is the best for joining these boards of a small table?

I want to join these four 1.8 cm thick beechwood boards as one can see on the picture. My idea is to join at the B points with biscuits but I’m not sure what to do about the A points. It needs to be a ...
7
votes
2answers
1k views

When repairing a split table top, should I use dowels, biscuits, or something else?

We bought a 5' diameter table many years ago from a Macy's warehouse sale. It's a 1" thick wood table top screwed to a cast iron leg/ base. When we bought it, it had a slight warp about 2/3s from ...
7
votes
1answer
387 views

While building a bed frame, at what point should I start worring about cross beams?

So, I've made this bedframe that's rather tall, the frame is 32" off the ground, and the legs are each bolted on with two 3/8" bolts running perpendicular, and horizontally. Having not actually used ...