I want to hang a 26 inch flat panel monitor on a wall that has metal studs. What kind of fastener should i use to attach the mounting bracket to the stud through drywall?
What's the best way to hang an unframed poster on a sloping wall without using something that will damage the poster?
What's the best way to hang unframed posters on a sloping wall without using tape or velcro or glue that would damage the poster? Thumb-tacks don't work too well because the poster ends up sagging ...
Epoxy anchor is essentially a metal alloy rod set onto epoxy. A hole is drilled and cleaned, then epoxy is put into the hole and the rod is inserted into the hole and left until epoxy sets. Using ...
I am replacing part of a floor because of water damage. I have removed three layers of flooring. The joists were unaffected by the rot (as was the bottom floor, but I removed it anyway). I only ...
We've just started installing pressure treated 2x4s as sole plates in our 5 year old basement. We drove 3 nails into each 8' plate, one at each end (around 3 or 4 inches in) and one somewhere at the ...
I am building porch railing, and I'm considering using dowels to attach the pickets so that no nailing is required. For 2x2 pickets: What size dowel stock should I use? How long should each dowel ...