This is in a two story, ~1000square foot per floor building. With the advent of affordable, decent (IMHO) LED fixtures (finally!) the entire lighting load for the structure looks to be 500W - 1000W at ...
Does the circuit providing a light at the electrical panel have to be ONLY for that light? I'm fairly sure there specifically has to be a light at the panel, as well as a circuit with an accessible ...
EDIT: The attached photo is the most easily accessible example of the conduit used in the entire house. This shows the conduit attached to the garbage disposal with the previously mentioned 3/4 set ...
I have an old GE meter socket load center (see picture). I have no idea what the model number is because the paper label on the inside of the lid is unreadable, and I have been unable to find any ...
I have 4 cables from a power supply which are 3 phase WYE 208 volt. so if I measure between neutral and hot I get 120V. The problem is that I need to hook up a compressor for 110V single phase (just ...