0
votes
0answers
22 views

Ceiling fan fixture lights flicker then whole unit fails completely

I have two remote controlled ceiling fan fixtures in my living room. The individual units are the same, three speed fans with three lights on each. One day one of them began flickering after I flipped ...
1
vote
2answers
534 views

What is the proper way to install a junction box above a dropped ceiling?

I'm doing some remodeling in my basement and part of that work involves moving a switch. When I was tracing the wires for the switch I found this above my dropped ceiling: Now, I'm no electrician, ...
3
votes
1answer
184 views

Molten wire nuts on recessed MR16 halogen lights

In one room of the apartment we rent, there's recessed 12v MR16 halogen lighting. There are 3 different circuits with dimmers. I noticed that two of the bulbs were humming loudly even when dimmed all ...
2
votes
2answers
498 views

Is it okay to staple romex to a floor joist when running it perpendicular behind a finished basement ceiling?

Taking down my ceiling to run some wire to new outlets. The outlets are going in an area with an unfinished ceiling, so I know the romex there will need to be ran through the joists when going ...
1
vote
1answer
115 views

How do I change out the light bulb in this fixture?

My wife picked up this light fixture at a sample sale. We had some electricians install it a while ago while we were having other work done on the apartment. The electricians threw out the box and ...
0
votes
2answers
139 views

How should I mount a rework box if it has to go through an MDF/wood panel and drywall?

I need to install a combination power and low voltage box in the ceiling of my finished basement for my home theater projector. I can't bolt the projector mount directly to the studs because of ...
1
vote
1answer
317 views

Why doesn't my replacement lighting work after my old fixture died?

I live in a pretty old condo in MA, and the living room track lighting stopped working. New bulbs didn't help, but the second set of lights on the same outlet worked fine. Replacing the bulbs and ...
0
votes
1answer
177 views

How Safe is this 5-way ceiling lighting DIY install

I've installed a 5-way ceiling light in a relatives house yesterday and whilst I've been more than careful in all it's prepartion and install, and being over caustious (without big paranoid!) I'm a ...
6
votes
2answers
2k views

How do I install this flush-mount ceiling light?

I bought a new flush-mount ceiling light and am having a tough time figuring out how to get it installed. The instructions that came with it are completely useless. Here are all of the pieces that ...
2
votes
2answers
3k views

How do I wire this ceiling fan?

I'm trying to wire a new ceiling fan. The outlet box wires are White, Red, and Black. The ceiling fan wires are Black, Blue, White, and Green. The installation manual states to connect both ...
1
vote
1answer
244 views

How can I hang a ceiling fan with a 3/4 inch difference between the junction box and bracket?

I've taken down an old ceiling fan for replacement and found the octagonal junction box to be approx 3/4in above the ceiling, it isn't flush with the drywall which the new ceiling fan bracket mount ...
2
votes
2answers
2k views

How to wire two light bulb sockets inside a ceiling fixture?

I purchased a flush-mount ceiling light with 2 light bulbs. The wiring is a simple 1 black, 1 white, and 1 ground to the ceiling box, but there were also wires connecting one bulb to the other. ...
0
votes
3answers
931 views

How can I hide the wires to a self-made ceiling light fixture?

I have a simple self-made ceiling light fixture, but it currently lacks two things: some kind of a pipe to hide the wire. a cover to hide the ceiling junction box. I'd like to use something ...
3
votes
1answer
942 views

Are there octagon box extenders that are slimmer than 1 1/2" deep?

Is there an octagon box extender that's slimmer than 1 1/2" deep? So far I haven't been able to find one. Here's why: to cover up 30 years of patching on one of my plaster and lath cielings, I'm ...
5
votes
1answer
543 views

Do I need to attach a wire fished through a ceiling?

I have a finished basement and am mounting a flat-screen TV on the wall and I want to put an electrical box behind the TV. The two existing outlets are both two joists over and each separated with a ...
2
votes
1answer
593 views

What would cause a ceiling fan to stop while the light still works?

Installed a new fan/light today. Wiring appeared to be identical to old fan we removed. green ground to green ground on mounting bracket. white to white. black and blue to black. Turned it ...
3
votes
1answer
668 views

Should the tester start flickering when I touch my chandelier's top wiring cover?

(First time quiestion here, so correct me if something's wrong) I recently installed a lamp on the ceiling (a metallic chandelier). Two wires connected to the ceiling (one phase and one "zero"). The ...
3
votes
2answers
2k views

How do I install a ceiling fan without creating holes in the ceiling?

I wanted to install ceiling fans in my house but there there were no existing outlets in the ceiling so I got an electrician to do it. He created 2 holes in the ceiling and 2 in the wall to run the ...
1
vote
2answers
2k views

How do I mount a ceiling box in 4" thick ceiling?

I'm trying to install a ceiling light in two rooms that didn't previously have hard-wired lighting. After cutting a 4" hole for a circular ceiling box (using a hole saw attached to my drill) I'm ...
3
votes
4answers
2k views

How do I fix a ceiling fan that won't turn off?

I have a ceiling light/fan fixture in one of my rooms connected to a single electrical switch. There are two pullchains on the fixture, one that controls the light, the other controlling the fan. I'd ...
2
votes
2answers
4k views

How do I change the remote frequency options in my ceiling fan?

My Hampton Bay ceiling fan remote control is interfering with my neighbours. Inside the remote there are switches to adjust the remote frequency. Where in the fan do I make the corresponding ...