For questions about drywall (aka plasterboard) installation, repair & finishing.

learn more… | top users | synonyms (1)

3
votes
2answers
434 views

Will this moisture problem persist after drywall is installed?

we remodeled a trailer home recently, removed the aluminum siding, put up osb in place of the siding, then used the Lowes brand of house wrap. we installed new vinyl siding over that without using any ...
2
votes
2answers
256 views

How should I prepare drywall for wallpaper?

If I am posting wallpaper, is it still necessary to apply joint compound? I though that corner could be cut because the surface won't be exposed especially if i cut all the beveled edges off and ...
9
votes
1answer
740 views

When finishing drywall, is it a common practice not to mud the bottom of horizontally-hung drywall?

I hung drywall horizontally in my bedroom and hired a company to mud and tape it so that I could prime and paint. As you know, drywall sheets are recessed along the edges in order to hold drywall ...
2
votes
1answer
205 views

Can I use 2-1/2“ metal studs to hang 1/2” drywall?

I am in the process of remodeling my basement, & it's ready for studs; the basement is small, so to maximize as much space as possible I was thinking of using 2-1/2" metal studs opposed to the ...
2
votes
1answer
895 views

How can I cover water stains on this wall

During sandy storm I had some water leakage in my home. The damage isn't much in the sense that the drywall is still hard. It just has water stains that I'd like to get rid of. Here is a pic of what ...
2
votes
3answers
661 views

How do I reduce the number of screw pops in my drywall?

Background: I'm gluing and screwing 5/8 in drywall on the ceiling in my own home. I'm attaching it with screws and construction adhesive directly to the attic joists -- which are 16 in OC. I'm ...
0
votes
1answer
92 views

how to find out my primer color

I have some scratches on the drywall which was primer'ed dry wall from moving furniture. I'd like to just apply a coat of primer on the spots where the scratches are. I don't plan on painting just ...
2
votes
1answer
709 views

Which primer to use on an old drywall?

I have a dry wall in the kitchen that has some stains on it. I would just like to put a new coat of white primer on that dry wall so it doesn't look stained. My questions are: Should I sand the ...
2
votes
1answer
689 views

Is this asbestos in my ceiling drywall?

While looking through a hole in the drywall, I saw this... Is this asbestos?
1
vote
1answer
1k views

How do I properly prepare newly-finished drywall for priming?

What is the minimum amount of dust that can be left on a wall before it adversely affects primer application? If it has to be completely free of dust, how do you get it all? Taking a damp rag over ...
3
votes
2answers
1k views

Can drywall with ripped paper be repaired?

I damaged some drywall when doing demo in a bathroom. Some of the paint peeled back and exposed the paper, which ripped off of the drywall. Can I do a thin coat and sand? please help, already ...
5
votes
1answer
483 views

How do I mount this non-standard wall plate to a completed drywall wall?

I have this But it only has what you see in that pic. I was told I needed the box thing to go behind it to mount it to in the wall. There is no hole in the wall right now, so how do I get this to ...
6
votes
1answer
264 views

How do I install an old work junction box around fire blocking?

I have an interior wall with a one-gang light switch; it contains a dual dimmer. I'm trying to change this to a single dimmer, and to add a new switch (to drive the other load) on the opposite side ...
2
votes
1answer
318 views

Is it common for professional drywallers to tape narrow corners, but not mud over the tape if it's going to be covered with moulding?

Sorry to spam SE with questions relating to a job done by a company I hired to finish the project in my room, but some things seem very questionable to me. In the below pics you will see a narrow ...
3
votes
1answer
2k views

Can I hang a bathroom cabinet on a single stud and drywall anchors?

I have a 15-20lb wood bathroom cabinet (24 inches wide, few feet tall) and I'll be looking to load it up with heavy bathroom supplies. Problem is there is only one stud available. Do you think one ...
4
votes
2answers
1k views

can i paint my bathtub wall?

One of our bath walls is green Sheetrock with a white semi gloss paint finish. As you can see on the pictures attached, the paint has started to bubble and strip. What can we do now? shall/can ...
9
votes
2answers
852 views

Are these drywall screws properly driven/countersunk?

Related to this question. Even though I might be cluttering up SE with questions about driving drywall screws, I feel they will ultimately be helpful since I have been unsuccessful in finding images ...
1
vote
1answer
941 views

Should I primer my walls/ceiling before I spray on texture?

I have removed a wall and upper cabinet, replacing some sheetrock. I have skim coated and sanded the existing walls and removed the "popcorn" ceiling. My question is: do I need to primer the walls ...
11
votes
1answer
1k views

Are these drywall screws driven too deep into the sheet?

First off, I apologize for the asking and deleting my previous question about this. I thought it was more of a dupe of this question that I asked a while back. I'll be more central to the actual ...
9
votes
4answers
5k views

Should I be worried if I missed the studs while mounting my TV?

I think I missed the studs based on how easily the drill moved through the drywall. My LCD only weighs 27lbs and the mount itself is 5lbs (rated to hold 165lbs, and uses 4 8mm lag bolts). I pulled as ...
3
votes
2answers
763 views

How can I remove plaster board/drywall rawl plugs?

I have used red head metal plaster board rawl plugs. The kind that flare out flat when you screw the bolt in. I now need to remove them. Is there a trick to remove them so I can reuse them or take ...
3
votes
1answer
2k views

How should I insulate around pipe/cable holes in drywall?

Notice the gaps between the pipes and the drywall in the pictures above? These gaps appear in both the walls and the ceiling, and I feel like in at least one case, I've noticed a difference in air ...
7
votes
3answers
14k views

How can I repair a towel rack that was ripped out of the wall?

The towel rod has been ripped out of the wall. It looks like it was attached to the wall by two dry wall anchors which were not attached to the stud. Basically a very junky installation in my ...
1
vote
1answer
810 views

Should I use acoustical insulation or acoustical drywall for interior walls?

We are getting ready to begin a multi-room renovation project and are thinking about sound deadening. We want to either add sound deadening insulation or acoustical drywall to the interior walls but ...
1
vote
3answers
732 views

When hanging two layers of drywall, can the first layer be hung with the facing to the studs?

I am hanging a double layer of 5/8" type-x drywall with Green Glue, a soundproofing compound, sandwiched in the middle. If I hang the first layer with the face facing outward like normal and then ...
3
votes
2answers
2k views

Should I cover a skylight well from the inside?

I made the mistake of having a Velux skylight installed in my bedroom. The installation was done by pros, both inside and out, and it has never leaked through 2 hurricanes. The installation was done ...
4
votes
1answer
1k views

What is the code approved way to cut and patch fire rated drywall hung on the ceiling of a basement?

My new house is still under construction, and for code reasons the builder is required to hang fire rated drywall on the ceiling of the basement. I am sure the situation will arise eventually where I ...
2
votes
3answers
7k views

How should I apply brick to an interior wall?

I don't want to use veneer, I want to use real brick. Is it as easy as using tie-ins to the studs and setting the brick as one would normally? The existing wall is drywall, So I was thinking of ...
9
votes
2answers
1k views

What are the implications of driving a drywall screw too far into the sheet?

I'm not gonna lie. The early stages of my very first home improvement project completely smacks of novice DIY'er. I did so many things wrong that I've since learned from, but the first mistakes are ...
19
votes
4answers
2k views

How can I get a wire that is outside a wall to be inside a wall

I recently removed an abominable drop ceiling from my dining room and found this close to the ceiling on the one side of the room. There is definitely a stud between these two holes. On the other ...
7
votes
2answers
892 views

Can I install drywall on the ceiling, without removing crown molding?

I'm in the process of replacing a failing plaster ceiling in my finished basement with drywall. I originally had intended only to scrape down the popcorn finish and have it skim coated, so I did not ...
4
votes
1answer
674 views

How do I install a glass tile backsplash on 1/2" drywall?

I am currently building a house and am at the point where the builder has just finished the drywall and is ready for the kitchen cabinets and countertops to be installed. There will be no backsplash ...
3
votes
3answers
7k views

Is it safe to use Greenboard drywall in a shower?

I've seem a lot of people telling that greenboard drywall SHOULD NOT be used in bathroom and wet areas. However, in Brazil (where drywall is kind of a novelty yet) the manufactures recommend ...
2
votes
3answers
666 views

Do I need to cut into my drywall to install a switch?

I'm looking to put a light in outside my house. The light is going to be positioned directly behind the outlet I have pictured below where the wires are sticking out. I want the switch to control ...
5
votes
1answer
369 views

How can I replace ceiling gypsum board and loose fill insulation at the same time?

I lost most of a ceiling panel due to water saturation and collapse. It was removed along with insulation residue and a temporary fiber board panel tacked in in its place. Now I would like to install ...
4
votes
6answers
8k views

How should I remove the texture from the ceiling *without* tearing it out?

We want to get rid of the texture on our ceiling. It's a very ugly stipple effect. However, there's a foot and a half of insulation over this ceiling. Knocking it down to install new drywall is ...
4
votes
2answers
3k views

How do I mount the new work electrical boxes with the nail-in flange?

I have to install several electrical boxes for outlets, switches, and fixtures before installing some drywall. The boxes I have look like this: The distance between the front of the mounting ...
1
vote
1answer
209 views

Will grid-lines in textured ceilings show through paint?

We just finished texturing our ceilings with a knock-down texture, however the following day we noticed wide grid-lines in the ceiling everywhere we taped and mudded. We did not prime/seal the ...
3
votes
2answers
2k views

Should I be concerned about my house settling?

I bought my home about a year ago (September 2011). It's a split-level ranch built in the mid-70s. I have a couple of spots, especially on a wall going perpindicular through the center of the house ...
2
votes
2answers
773 views

How to repair latex paint on drywall in bathroom?

Within the two years we've lived in our house, the paint in our master bathroom has gone from glossy white to cracked and peeling in several spots. In addition to this, staple-shaped rust spots are ...
2
votes
1answer
2k views

Can a new ceiling be build directly onto an old one

I would like to build a new ceiling on to an old slightly sagging and poorly finished ceiling (peeling paint and no joint plaster used). I see this way as more convenient and less messy than ripping ...
4
votes
2answers
2k views

How to fit clothing rails into plasterboard to hold adequate weight?

I am converting hallway storage into a wardrobe. The dimensions are h 234cm W 132cm D 45cm I would like to put up two rails for clothing and some shelving for loose items My question is how would ...
1
vote
3answers
835 views

What products are available to make coved ceilings?

Due to massive cracks and drooping ceilings we need to tear off our existing plaster/lath walls and replace with sheetrock. The 1948 house currently has coved ceilings that we want to duplicate when ...
11
votes
4answers
5k views

How can I install a cable jack without a box?

I recently had our drywall replaced due to flooding. Our coax cables are now just hanging out of the new wall and I need to install cable jacks. Is there a way I can mount the coax wall plates to the ...
6
votes
4answers
2k views

Why is the drywall in my garage sagging?

The drywall on my garage ceiling is sagging badly. Is this because it's too thin (I think it's 1/2" and I guess it's supposed to be 5/8") or is it because of humidity or something else? If I ...
5
votes
1answer
813 views

How do I mount TV through 3 layers of drywall and into studs?

I have a 65lb 46" LCD television and a Sanus "flush" style wall mount. The mount instructions suggest that it shouldn't be mounted anywhere where there is more than the thickness of a single sheet of ...
4
votes
4answers
3k views

How should I insulate the walls and ceilings of this 1920's semi-detached brick house?

I'm renovating a 1920's semi-detached house. The plaster on the walls was slapped straight on the wall about an inch thick, and the ceilings were lath and plaster which had been overboarded. Most of ...
2
votes
3answers
13k views

How can I pass cables vertically through walls that contain fire blocking?

How can one pass (speaker) cables through walls from the floor to the ceiling. I am assuming that drilling a small hole at the top, dropping the cable I want to pass through and catching it at the ...
6
votes
1answer
2k views

Do I need to prime/seal new drywall behind cabinets?

If I were doing it, I would usually prime and paint before installing the cabinets. My painter for this project says he'd prefer that I install everything before he paints. Do I need to use a sealing ...
3
votes
2answers
728 views

What should I do about this possible mold I found under paint?

I live in Austin, Texas, which is important in that we don't receive much rain, and it's not very humid. I was peeling paint off of the old drywall, and found what appears to be mold on the bottom of ...