The tag has no usage guidance.

learn more… | top users | synonyms

0
votes
3answers
266 views

Installing Crown Molding - Metal Studs

I'm thinking about putting up crown molding in my living room, but the apartment building I live in has steel studs. I've seen people online use the x method of nailing to secure the crown molding to ...
0
votes
2answers
3k views

Why can't I get this plastic drywall anchor into the hole?

I bought drywall anchors to hang a curtain rod, and followed the directions on the package (use 1/4" drill bit to make the hole for the anchor, then push it in). When I push, it won't go. If I try to ...
2
votes
1answer
390 views

Live wire running through entire apartment wall?

I'm currently renting an apartment and my spouse and I want to hang a metal fixture above the wall where our bed is (in lieu of a headboard...for now at least). Where I want to hang it is 4 feet above ...
9
votes
4answers
1k views

dry wall anchor won't hold

i have baby gate on the top of the stair. dry wall anchors used held up for a couple of month but now it came out lose. What type of anchor do i need to use for this?
0
votes
2answers
49 views

Toggle bolt stuck in the ceiling with mounting plate

I bought 3 LED flat panel ceiling lights from Costco. 2 panels installed perfectly. One one panel, 3 toggle bolts are installed perfectly, but 1 toggle bolt is stuck and I cannot screw it into the ...
4
votes
1answer
881 views

Attractively anchor a wire cable into drywall

I want to string a ‘high’ tension wire between two walls, for hanging light decorations on. The word ‘high’ is in quotes because it only needs to be tight enough to keep the wire looking level across ...
1
vote
3answers
137 views

How to anchor through .5 inch drywall/.75 inch wood/concrete block

Installing a TV wall mount. The issue is that the wall is 1/2" dry over 1x2 wood spaced 24 inch on center and then concrete block. What is the best fastner to to use considering the first 1 1/4" ...
1
vote
5answers
276 views

Fix a screw into a wall-plug

The mirror in the bathroom is held by two hooks, that are screwed into the wall through wall-plugs. One of the hooks has become loose, and can easily turn around, and is thus not holding the mirror ...
13
votes
6answers
42k views

Why would plastic anchors pull out of the wall?

What is going wrong? To install plastic anchors I was taught to drill a small hole (exact size of anchor or slightly smaller.... lightly tap in anchor until fully recessed and face is flush with ...
4
votes
3answers
82 views

How do I remove this type of screw/nail (Cadet Heater FWC wall can)

I am a newbie. I want to remove Cadet Heater wall can and patch up the drywall but it appears that the wall can is secured by 4 round flat screws on the side. I tried pliers but it's small and round ...
0
votes
2answers
65 views

I want create some hanging shelves using zinc E-Z Drywall Anchors & Sisal rope. How much weight could this method bear?

I recently bought a projector and am looking to build a shelf for it to sit on. I rent, so I really don't want to do anything with the ceiling. The configuration I'm currently using is just a standard ...
2
votes
2answers
135 views

What type of anchor is this and what is the max capacity ?

I want to mount an item that is pretty heavy on the wall but the studs don't align with where I would like to mount it. Here is a picture I the anchor I am using (using two of them): What type of ...
1
vote
5answers
751 views

What's the strongest anchor for something heavy in double drywall?

I have a party-wall in my apartment-née-condo that seems to have two sheets of drywall installed against eachother. All attempts to find some sort of stud or resilient channel / furring strip have ...
0
votes
1answer
40 views

Hanging a mirror on unknow wall type

I need to hang a 25Kg mirror on a wall, however I do not know what type of wall it is, I think it is possibly plasterboard or thermalite blocks. I have been looking at various fixings online, and you ...
2
votes
2answers
62 views

Nylon “expansion” anchor in drywall

Here we have an anchor named "universal anchor", that is supposed to work in every kind of wall (concrete, hollow, drywall, etc). I've used it in concrete and it is very good, but I'm a bit worried ...
2
votes
4answers
64 views

Hanging pictures/mirrors to drywalls without leaving big holes

What are the best methods (screws, hooks, etc) to hang heavy objects (such as huge mirrors and framed pictures) on drywalls while doing the less possible damage? I don't mind drilling holes in the ...
2
votes
1answer
80 views

Are 4 toggle bolts enough to hold up a 32in TV?

My studs are 16 inches apart, but the stud is exactly centered on where I want my TV on the wall. The horizontal bars for my wall mount are 25 inches long (not long enough to reach the next studs to ...
-1
votes
1answer
149 views

Once I put in a screw with a dry wall anchor screw, can I remove the screw and replace the screw without ruining the anchor?

I want to mount plumbing pipe on dry wall as a curtain rod. I have dry wall anchor screws. The style of curtain I have will require me to remove the bracket from the wall to be able to take the ...
2
votes
3answers
756 views

Mounting Full Motion Mount on a Single Stud

I've seen this question regarding a sheet metal stud, but my plan and situation are a bit different. I am curious if ananyone thinks this sounds secure: I have a full motion flat screen wall mount ...
1
vote
2answers
1k views

Screw is turning within wall plug and not tightening

In attempting to fix a toilet roll holder to a wall in my bathroom, the screw within the wall plug fails to tighten and grip the bracket. It does screw in but doesn't tighten against the wall. There ...
1
vote
1answer
67 views

TV Fixings - 40" LED fitted to drywall using one metal stud and snaptoggles is it safe?

My son has just fitted my new 40" LED TV to drywall. He did attach a board to the drywall but when he purchased the board he had assumed the metal studs were 18" apart not 24" so only bought a 20" ...
13
votes
4answers
3k views

Why are all towel bars 24 inch? With studs being 16 inches apart - how do people mount them?

I want to install a towel bar in my bathrooms - and I went to Home Depot to get one - but all of their towel bars were 24 inch... This to me is weird. Do all people just mount their towel bars to a ...
4
votes
1answer
131 views

How Much Weight Can My 1/2" Drywall Ceiling Take?

Okay, so, I'm doing a DIY home improvement project; I do not have access to the attic as my home is on the second floor of my building. The project: Installing a beaded ballchain/shimmerscreen ...
0
votes
1answer
81 views

My wall is over 25mm (1 inch) thick, what kind of screw/fastener do I use?

So initially I thought I had a regular plasterboard. But I have a small measuring thing for wall depth, and after drilling a hole it seems it's deeper than 25mm. The plastboard thickness I see is 10 ...
2
votes
2answers
82 views

Stud finding for window curtains — what does it mean that the whole side of the window frame is magnetic?

I had originally hung up window curtains by putting plastic anchors into the plaster and screwing into those. After a year, that fell out. Searching online, it seems if I find the studs / wood ...
0
votes
1answer
95 views

I'm trying to mount a TV into a brick wall covered by 2“-2.5” of drywall… is this doable?

I'm trying to mount a 39" TV that I have previously mounted (with no issues) into typical wooden studs with an arm mount. The mount uses two vertically oriented 5/16" bolts. After stopping by my local ...
0
votes
0answers
52 views

How to hang curtains drywall with no gap

How can I hang curtains on an exterior wall that only has 1/2" between the interior(painted) drywall surface and the beginning of the exterior wall? I tried to use a hollow wall anchor #6-32 x ...
0
votes
0answers
46 views

Extra security for a wall mounted 80" TV?

We just mounted our 80" TV on the wall with one of those adjustable & tilting wall mounts and it just doesn't feel super secure to me. The TV is about 130 lbs and the mount says it can support up ...
2
votes
1answer
238 views

How to safely install drywall anchors near wiring

I need to hang a rack on a pantry wall, the other side of which has a light-switch. The rack will be holding quite a bit of weight (well-distributed, and close to the wall, though), and I need to ...
2
votes
1answer
195 views

Can I mount a projector shelf to drywall?

I need to mount a projector shelf, however finding a stud is proving impossible. Is it a terrible idea to put this shelf up on drywall and then the projector which probably weighs at least 15lbs?:
2
votes
2answers
299 views

Fixing a poor measurement of drywall toggle anchors

I recently installed two metal drywall toggle anchors (similar to this. My measurements for these anchors turned out to be about 1/8th of an inch off, so they do not line up with the d-rings on the ...
2
votes
1answer
62 views

How to remove things from drywall?

How do I remove the little round plates that are back of a stud in drywall?
4
votes
3answers
622 views

Is it OK to install a TV mount when it can't be attached to a stud at all mount points?

I have a TV wall panel that can only reach two studs. I was wondering if it's fine to screw the left side and the center on studs, and have the right side anchored in the drywall. My TV is 30lbs with ...
1
vote
1answer
3k views

Will using concrete anchors in wall studs cause problems?

While installing a wall mount for a 48" TV, I realized I made a mistake. I drilled a ⅜ pilot hole in the wall stud and then installed the anchors provided with the mount that the lag bolts would be ...
1
vote
1answer
2k views

Why can't I drill deep enough into my wall for wall anchors?

I am living in a condo and have a problem to put anchor in the wall (drywall? I don't know th exact type of the wall). when I drill it doesn't go deep enough to put anchor completely in, so it can't ...
2
votes
1answer
85 views

How to fix a cupboard to 32mm thick plasterboard

I want to fix a cabinet to a bathroom wall. The wall is 710mm wide and has a single stud slightly off-centre, about 270mm from the right, but which is too near the middle to be useful for hanging the ...
0
votes
1answer
57 views

Will a drywall anchor work fine after it's already open or engaged?

I'm going to install some shelving that is going to require either drilling into the stud, or using drywall anchors. The brackets are kind of thick (half an inch), so I'm wondering if it matters if ...
7
votes
7answers
27k views

How to remove closet shelf clips and brackets without damaging the wall?

The previous owner of my new house installed ClosetMaid shelves in the closet. I removed the shelves, but had a really hard time with those clips and brackets (pictures attached). Seem like they were ...
3
votes
4answers
335 views

Plastic Wall Anchors Without a Collar

I have installed some new toilet paper holders in my house. They came with cheap plastic wall anchors without a collar on them. I threw them away and used different anchors, because every time I try ...
1
vote
1answer
170 views

Hooks for floating shelves

I'm planning on drilling into my wall and putting screws into hang a floating shelf I got from Ikea. It's fairly small (about 30cm x 30cm) but I would like to leave about 10 text books on it. ...
0
votes
2answers
152 views

How can I hang small weights from a drywall ceiling in a way that's minimally destructive?

I need to hang some plants (small, a few pounds max) from the ceiling but I don't want to go the usual toggle bolt or the drywall anchor route. These create holes that are too large for the kind of ...
1
vote
2answers
1k views

How do you install the plastic/nylon toggle anchors?

I recently bought a shelf that included these types of wall anchors, and for the life of me, I could not figure out how to install them. What's the trick with them? ...
0
votes
1answer
235 views

Can you “extend” a drywall stud?

I installed shelves in a closet with unevenly spaced studs. The shelves are mounted to the studs and they are level and secure. The shelve mounts can support a clothes hanging bar. The bar has holes ...
3
votes
3answers
8k views

How do I install a coat rack on drywall over concrete?

Ok, here's the problem. I have a coat rack that was installed poorly by the previous owner, who firstly installed it upside down and then secondly didn't use any drywall mounts. It came right out of ...
1
vote
1answer
311 views

Problem Using Wall Anchors for Curtain Rod

I'm trying to hang curtains for a floor-to-ceiling window by using drywall anchors to hold up the curtain rod. However, the plastic screw gets stuck about halfway anywhere I attempt to drill. When I ...
11
votes
5answers
64k views

How do I repair a curtain rod anchor that was ripped out of the wall?

My children managed to pull on the curtains hard enough to yank the bracket which attached the curtain rod to the wall out. What is the best way to repair this? Here's what it looks like:
2
votes
2answers
1k views

How to fix over-tightened metal drywall anchor?

I was installing a metal drywall anchor for the first time, and accidentally over tightened it. Now it isn't tight on the wall, and is unusable. I can not remove the screw from the wall, and am ...
0
votes
4answers
843 views

How do I remove plastic shelving molly clips?

I have some closet shelving clips I need to remove to paint a wall. The problem is that they are molly bolts. These are the exact clips/mollys. The question is similar to this one, but in my ...
0
votes
2answers
5k views

How to fix a towel bar drywall anchor getting loose?

I have a towel bar which isn't anymore firmly attached to the dry wall as it should. You can see what the situation looks like in the picture below. This was most likely due to the screw not being ...
18
votes
5answers
21k views

What are the different types of drywall anchors, and what are the advantages of each?

I recently put up wire shelving in my pantry, and spent forever figuring out what type of drywall anchor I should use. I even found several types that I didn't even know existed. It might be good to ...