Questions pertaining to clothes dryers

learn more… | top users | synonyms

2
votes
2answers
631 views

Can I clean a second story dryer vent that goes out the roof from the inside?

My dryer vent goes from the second story to the roof. The problem is that I can't reach the roof. I bought one of those dryer vent cleaners that you can put on your drill and spin it up the vent. ...
1
vote
2answers
161 views

Cleaning a dryer vent with a sharp elbow

Curious if there is a good solution for cleaning a dryer vent that has two sharp elbows in it, one next to the other. There is a 90 degree bend as soon as the vent enters the wall and another 90 ...
9
votes
2answers
722 views

Do dryer sheets interfere with the dryness sensors in a dryer?

I have always used dryer sheets, specifically, to remove the static from my clothes. I purchased a new High Efficiency Dryer/Washer combo from LG, and they sate that if you use Dryer sheets, you void ...
1
vote
1answer
796 views

Anti-Vibration mats for top loading washer?

I am getting a new washer/dryer set. I originally had a front loader set, but it started smoking and I got tired of the front loaders. They will be installed upstairs and I was curious if the ...
3
votes
1answer
6k views

Can I move my washer and dryer 10 feet to the right?

My basement is being renovated, and I'd like to have my washer and dryer moved about 10 feet to the right of their current location. They would still be against the same wall, just further down. The ...
0
votes
2answers
3k views

Where in the breaker box should I terminate the neutral wire from my dryer circuit?

I am looking for an answer to something I am lost about, hopefully I can fins some help. I recently moved into a new home. The previous owners had a gas dryer and no outlets for an electric dryer. I ...
1
vote
0answers
28 views

Wiring assistance for dryer from 4 prong to 3 prong [duplicate]

Just moved into a new apartment so I had to change my dryer plug. However, after countless tutorials and videos I am a little confused with the current set-up. Is it right that the green(ground) and ...
2
votes
2answers
22k views

Where does the ground wire go in a 3-prong dryer cord configuration?

We moved to a new place where the dryer connection is 3-prong instead of 4-prong. The dryer was originally 4-prong, so we bought a 3-prong cord and installed it. It works fine, except I am not ...
2
votes
1answer
141 views

Dryer vent pipes touching copper hot water pipe

I am installing a long clothes dryer vent in the crawl space under my house to replace the old one. I am using a combination of both flexible metal pipes and rigid stove pipes to try to reduce the ...
0
votes
2answers
193 views

Should I repaint this dryer part?

on a combination washer/dryer, there's one metal part called the dryer duct, where water vapor right out of the drum is heated some more before going to cold water bath to condensate. That vapor ...
1
vote
0answers
384 views

Would this buildup cause “dHE” error on an LG Tromm dryer?

Got the machine off craigslist. During the drying cycle it stops and shows the error. The user manual tells that with dHE error I should inspect the water supply, if the water supply is within spec, ...
1
vote
1answer
58 views

What are these parts described by the service manual?

The service manual for a LG WM3677HW shows a very bad diagram... and I'm not very familiar with the parts to ID them. The image above tells me to probe 3 components, and if out of spec replace ...
7
votes
3answers
744 views

What is my dryer's fourth prong for?

We just moved and had to change plugs on the dryer from 3 prongs to 4. What is the fourth prong for? I know about positive, negative and ground, but I can't think of why a fourth would be needed.
2
votes
3answers
3k views

Why does my dryer get too hot?

I've just moved houses and set up our dryer in the new house. It seems to get much hotter than it used to: hot to touch on the top surface, and my wife said it smelled like charcoal. The two things I ...
2
votes
2answers
241 views

How can I prevent my clothes dryer door from fogging up?

When I turn the air conditioning on in my house, the inside of the window in the clothes dryer door fogs up. Also, if clothes are left in the dryer, they become slightly damp again. How can I prevent ...
0
votes
0answers
86 views

Why won't my Kenmore gas dryer run/stay running?

I am having trouble getting my Kenmore Gas Dryer to run/stay running. The timer appears to be ticking away but the dryer won't start. For a while I could "fiddle" with the dial & get it to start ...
1
vote
1answer
833 views

Can I safely bypass the door switch on my dryer?

The door switch on my dryer is broken (the rocker part of the switch just hangs loose) and the dryer won't start. I have the part number, but I won't be able to get one for several days. Is this ...
0
votes
1answer
188 views

What type of dryer best handles long exhaust vents?

I have a very long exhaust line (about 5 meters) from the dryer and have issues with moisture staying in it when I do laundry. Since the old dryer broke down, I am now shopping around for a new dryer ...
4
votes
1answer
641 views

How do I lower the humidity in my non-vented laundry room?

I've lived in my house for about a year now and I have this small room (maybe 5x6) that contains my washer and dryer. I have central air and this room does not have a vent. Also this room does not ...
2
votes
3answers
154 views

Can I use a vent that was over an electric oven for a dryer instead?

I just bought an apartment built in 1980 and it does not have a washer and dryer. There is a vent above an electric oven. I am remodeling the kitchen and moving the oven to the other side of the ...
3
votes
1answer
171 views

Should I repair or replace a dryer heating element and housing connector?

I have a Samsung dryer that has a burnt out heating element. I purchased a new one and removed the old one from the dryer. I have no problem with any of this. My problem is that the element ...
1
vote
2answers
1k views

How do I locate a dryer exhaust vent?

I live in an older duplex. I just recently attempted to clean out the dryer vent/duct for the downstairs unit and failed because I could not find where my dryer vent is outside. Is it possible that my ...
4
votes
3answers
7k views

Why does it take my dryer 3 hours to dry a load of clothes?

I have a Maytag model LD69806AAE clothes dryer. Since our tenants in our town home have moved in July 2012. They have pointed out that the dryer takes about 3 hours to dry a load of clothes. The dryer ...
5
votes
1answer
5k views

What is causing the SUPER loud noise from my dryer

I have a maytag gas dryer. It is about 20 years old. Model number DG7500 It sounds like an jet engine taking off. I've noticed that it starts off quiet than builds up to a very lour roar. I googled ...
0
votes
2answers
952 views

How do I install a washing maching in my condo?

My condo has a closet design for a washing machine/dryer set up and I want to make sure everything is wired correctly It has connections for hot and cold water on the wall. It also has two other ...
5
votes
3answers
2k views

Is it safe to install a three pronged wire into a four pronged dryer?

I just moved into an old home that has a three pronged wall jack as shown below: I have a newer dryer that has a four pronged wire. Please see the back of the dryer, I've removed the four pronged ...
1
vote
1answer
538 views

How can I cut this semi rigid aluminum duct for my dryer?

I want to cut a piece of semi rigid aluminum dryer vent duct - though in doing so I will be cutting one of the ends off that goes either into the dryer or the wall outlet for the hose - the "lip" will ...
4
votes
1answer
294 views

Can I Use 4" CPVC Pipe for a Dryer vent?

Can I use 4" CPVC pipe to extend a dryer vent in my garage?
2
votes
1answer
184 views

Why did my dryer shut off in the middle of drying a load?

My 14-year old Kenmore Laundry Center Dryer, Model #417.98702891, shut off in mid-load the other day. Internet research led me to believe it could be the thermal fuse. I first checked the vent lines ...
5
votes
1answer
2k views

Can I attach a kitchen vent and a dryer vent to the same exhaust?

I currently have a dryer attached to an exhaust vent with flexible tubing; this flexible tubing is in severe need of repair. That is (I hope) easy enough, and is not the crux of my question. The ...
0
votes
1answer
376 views

How do I use a vaporizer/humidifier? [closed]

An attic has been converted into a bedroom and it's very uncomfortable to sleep in, the air is very dry. I bought a humidifier but it didn't come with instructions. This may be a silly question but I ...
-3
votes
2answers
128 views

How could I go about modifying (or building) a hand dryer to be more efficient? [closed]

I find myself spending a fair amount of time in my workshop as a result of some newly acquired hobbies (painting an building things), and a seemingly equal amount of time in the kitchen as a result of ...
6
votes
5answers
7k views

Is it possible to use a dryer vent as a heat source in the winter?

Is it possible to attach a diverter to an electric clothes dryer vent so it can help heat my house in the winter? Seems like such a waste to blow it all outside. I imagine you'd need some sort of ...
0
votes
4answers
730 views

How can I quiet my dryer vent from the outside?

I have a Whirlpool electric clothes dryer and it is under 5 years old. When it is drying it makes a "whirling sound" that is especially loud from the outside where it is vented. My neighbor is ...
0
votes
2answers
4k views

How do I troubleshoot my Kenmore dryer that doesn't heat up?

I have a Kenmore 110.64642400 that has just started acting up. It spins fine, using the timed dry function the timer knob advances (although not in the auto dry function), but it never heats up. ...
5
votes
2answers
7k views

What could cause clothes to come out of the dryer with tiny burn or scorch marks?

I have a fairly standard Hotpoint vented electric tumble dryer, which normally works as you would expect, drying clothes, venting the humid air out the side wall, and with a lint trap I empty every ...
3
votes
5answers
4k views

Why is my 3-prong dryer outlet showing 240V between hot and neutral/ground 'L' prong?

I'm trying to tell what might be wired wrong with our dryer outlet. Using a Fluke 75 set to AC, I read 238V between the hot leads, 118V from one lead to ground, and 238V between the other lead to ...
2
votes
2answers
2k views

What can I do about a hole for a dryer vent that was cut too big?

Our basement dryer vent was cut too big. There's a gap of approximately 2" all the way around. We want to fill it (crickets, and cold air in winter come in). I bought a can of spray insulation but am ...
6
votes
4answers
5k views

Can I vent my dryer into the crawl space without creating mold and moisture problems?

We have a crawl space with a combination of sandy and clay soil in it. The crawl space is about 3' deep. To eliminate a long dryer vent run, I'd like to vent the dryer directly into the crawl space. ...
2
votes
3answers
712 views

Is it safe to use a former furnace flue to vent my dryer through the roof?

Our dryer is located in the center of our house. The current vent situation has tubing that makes several bends between the dryer and the crawl space before hitting metal duct that takes it about 25' ...
1
vote
1answer
145 views

Can my dryer exhaust crossing my HVAC duct be a fire hazard?

I have a dryer exhaust that crosses over a flexduct HVAC line, could the dryer vent cause a fire?
9
votes
5answers
4k views

Why would there be a 50 amp plug on a 30 amp appliance?

I have an old conveyor dryer, which my office purchased used some time ago, just sitting in storage. The dryer is for silk screen t-shirts and has a large heating element and a variable speed conveyor ...
4
votes
3answers
32k views

How do I connect a dryer with a four prong plug to a three prong socket?

I've just moved house and my clothes dryer has a four prong plug but on the wall there's a three prong socket. Do adapters exist for this? Or do I need to get a new cord for my dryer? Or is there ...
0
votes
2answers
358 views

Help identify this electric clothes dryer part from an Asko T701 dryer?

I just replaced the drum rollers on my Asko T701 electric clothes dryer. As I was removing the front frame to access the rollers, this metal part fell out (the Sharpie is just there for scale): I ...
1
vote
3answers
2k views

Can I clean my under-the-floor dryer vent?

Our laundry nook is smack in the middle of our house. The dryer vent goes into an interior wall, turns 90° downward, soon turns 90° back the way it came, and goes straight for four or five meters ...
4
votes
3answers
749 views

Why does my dryer duct have such a long vertical portion?

My dryer duct follows this path: Flex duct leaving the dryer Four feet of vertical rigid steel duct down into crawlspace Eight feet of horizontal rigid steel duct, immediately below the floor Outlet ...
3
votes
1answer
256 views

How should I attach laminate foil dryer transition duct?

I've got a laminate foil dryer duct coming up from the crawlspace. I need to attach my dryer transition duct to the exhaust duct, but these really don't like to go inside one another since they're ...
2
votes
1answer
2k views

What can be done about this unattractive dryer vent?

The house I bought has dryer vent that runs from the dryer into the ceiling. Besides being an eyesore it is also loose/flimsy. I'm redoing the laundry room and would like to make this more ...
2
votes
1answer
2k views

OHM reading for dryer element? Bad thermal cutoff fuse indication of element overheating?

So I've read that I should get about 10-50 ohm reading on my dryer element. I do get a reading of around 10(jumps around alot) on my element, but this is with the multimeter set to 200(the lowest ...
7
votes
1answer
2k views

How can I catch more lint in my dryer?

In the 3 story townhouse I'm currently in, the contractor originally built the (stackable) dryer vent to go straight up from it's location (top floor), then when it gets above the ceiling, it angles ...