3
votes
3answers
85 views

How common is it for new homes to have gas-only dryer hookups?

I am relocating my dryer. I had the gas line relocated and a dedicated circuit put in for the washer and dryer. The original location had the option for an electric dryer. We have a gas dryer and ...
2
votes
2answers
81 views

Curcuit breaker not accesible

My dryer stopped working and I found out that the circuit breaker (fuse) had burnt out. I measured the voltage in the socket and it's none. I live in an older house in USA and the cable is inside the ...
0
votes
0answers
32 views

Clothes Dryer electrical 240v between hot and netural, 0 between other hot and neutral

I had to move around my dryer to do some work in my laundry room. When I plugged it back in, it wouldn't turn on at all. None of the buttons would even make the lights come on. I unscrewed the end ...
0
votes
2answers
98 views

What happens if you wire a four-prong dryer cord backwards?

What happens if you get the red and black wires of a four prong dryer cord backwards? This question assumes: we are talking about U.S. Residential wiring the person doing the wiring gets the green ...
6
votes
2answers
276 views

Why am I measuring decreased voltage between my dryer's neutral and hot conductors?

At the outlet: 40V - red to neutral (white) 40V - black to neutral (white) 230V - red to black 110V - red to ground 110V - black to ground At the circuit breaker: 230V - red to ...
5
votes
1answer
272 views

How can I plug my 3 prong dryer into a 4 prong receptacle?

My dryer blew up and there is no chance of repair — it was pretty old anyway. I found a used dryer and brought it home. Unfortunately, the cord don't match the receptacle. I Need to know if ...
3
votes
3answers
494 views

Can a dryer receptacle be wired without a neutral?

In my apartment, I have a 4 wire 240V receptacle for a dryer where the neutral is not connected, only the 2 hots and ground. Is this configuration permitted for a dryer circuit? An electrician and ...
0
votes
2answers
3k views

Where in the breaker box should I terminate the neutral wire from my dryer circuit?

I am looking for an answer to something I am lost about, hopefully I can fins some help. I recently moved into a new home. The previous owners had a gas dryer and no outlets for an electric dryer. I ...
1
vote
0answers
28 views

Wiring assistance for dryer from 4 prong to 3 prong [duplicate]

Just moved into a new apartment so I had to change my dryer plug. However, after countless tutorials and videos I am a little confused with the current set-up. Is it right that the green(ground) and ...
2
votes
2answers
14k views

Where does the ground wire go in a 3-prong dryer cord configuration?

We moved to a new place where the dryer connection is 3-prong instead of 4-prong. The dryer was originally 4-prong, so we bought a 3-prong cord and installed it. It works fine, except I am not ...
7
votes
3answers
560 views

What is my dryer's fourth prong for?

We just moved and had to change plugs on the dryer from 3 prongs to 4. What is the fourth prong for? I know about positive, negative and ground, but I can't think of why a fourth would be needed.
5
votes
3answers
1k views

Is it safe to install a three pronged wire into a four pronged dryer?

I just moved into an old home that has a three pronged wall jack as shown below: I have a newer dryer that has a four pronged wire. Please see the back of the dryer, I've removed the four pronged ...
3
votes
5answers
3k views

Why is my 3-prong dryer outlet showing 240V between hot and neutral/ground 'L' prong?

I'm trying to tell what might be wired wrong with our dryer outlet. Using a Fluke 75 set to AC, I read 238V between the hot leads, 118V from one lead to ground, and 238V between the other lead to ...
9
votes
5answers
3k views

Why would there be a 50 amp plug on a 30 amp appliance?

I have an old conveyor dryer, which my office purchased used some time ago, just sitting in storage. The dryer is for silk screen t-shirts and has a large heating element and a variable speed conveyor ...
4
votes
3answers
26k views

How do I connect a dryer with a four prong plug to a three prong socket?

I've just moved house and my clothes dryer has a four prong plug but on the wall there's a three prong socket. Do adapters exist for this? Or do I need to get a new cord for my dryer? Or is there ...
2
votes
1answer
2k views

OHM reading for dryer element? Bad thermal cutoff fuse indication of element overheating?

So I've read that I should get about 10-50 ohm reading on my dryer element. I do get a reading of around 10(jumps around alot) on my element, but this is with the multimeter set to 200(the lowest ...
6
votes
1answer
2k views

Insufficient voltage to dryer receptacle; what next?

I just moved into a home and I am hooking up a used dryer (which I'm told works). The dryer spins, but I get no heat. I bought a multimeter, and it tells me that the receptacle provides insufficient ...
2
votes
4answers
4k views

What is the proper wiring for a NEMA 14-30 240v receptacle?

We moved into a resale home, the previous owners had a Gas Dryer, we have an Electric. The laundry room has a NEMA 14-30 receptacle installed. I hooked up our brand new dryer and it didn't get power. ...