A tool used for creating holes in surfaces, such as for mounting objects on walls.

learn more… | top users | synonyms

1
vote
3answers
56 views

how can I drill a 1/2“ diameter, 1/2” deep hole in 3/4" particle board?

I need to drill a couple of holes in the bottom of a kitchen cabinet to fit it with IKEA Akurum legs. I thought of using a 1/2" spade drill bit but its' narrow end - the tip of the spear so to speak - ...
1
vote
2answers
34 views

Do I need a hammer drill to install brackets for drapes on a brick wall?

I want to put up brackets for drapes. I have a masonry bit, but are using a simple (and possible cheap) cordless drill. I can seem to penetrate the brick. Do I need a hammer drill to do the job.
1
vote
1answer
77 views

Hooks for floating shelves

I'm planning on drilling into my wall and putting screws into hang a floating shelf I got from Ikea. It's fairly small (about 30cm x 30cm) but I would like to leave about 10 text books on it. ...
1
vote
2answers
134 views

Are SDS drills metric, standard or all the same?

Can I buy SDS drills (or à drill machine) in the USA and use it with an European bought machine (or drills)? Is the SDS "connection" the same in Europe as it is in the US? Sorry for the language, I ...
1
vote
1answer
475 views

How can I drill through concrete blocks to allow drainage from my backyard?

My back yard has a brick floor and is surrounded by a concrete block wall. In heavy rains, the yard pools with rain water. How do I go about cutting drain holes in the wall or floor?
1
vote
0answers
1k views

Why can't I drill into studs more than 1 & 1/2 inches?

I am trying to mount a TV onto an "exterior" wall. I used the quotes because I guess technically it may not be exterior (I live in a townhouse with dividing walls between the houses). Anyway, I've ...
1
vote
0answers
149 views

Live wire running through entire apartment wall?

I'm currently renting an apartment and my spouse and I want to hang a metal fixture above the wall where our bed is (in lieu of a headboard...for now at least). Where I want to hang it is 4 feet above ...
1
vote
0answers
33 views

How to replicate holes in a wooden cabinet? [duplicate]

Possible Duplicate: How do I drill additional holes for adjustable-height shelving? I would like to modify the vertical position of a shelf inside a wood cabinet. The dowel pins are glued ...
0
votes
3answers
816 views

Does this Dewalt corded drill have multi-speeds?

I can't tell if this Dewalt drill has multiple speeds.
0
votes
2answers
93 views

What is/are the proper method and tools for drilling into masonry?

Related to this question, The blinds project has gone pretty smooth up until this point. It seems that some walls have plaster or masonry behind them. Probably not a big deal, but I've snapped a ...
0
votes
2answers
195 views

Can you get an “optionally cordless” or “hybrid” drill? [closed]

I'm looking to buy a new drill, but all of them seem to be corded or cordless. Are there drills that can either run cordless, or off the mains, depending on whether it's plugged in? It seems that ...
0
votes
1answer
7k views

How can I fill a hole in wood so that it can be redrilled? [duplicate]

The original strike plate for the deadbolt is mounted with 2 screws on top and 2 screws on bottom. I'm replacing the whole deadbolt and the new strike plate only has 1 screw on top and 1 screw on ...
0
votes
1answer
37 views

Black and Decker drill bit set with Kobalt drill?

How universal are drills and bit sets? Can I mix and match bit brands with drill brands? For example, would a Black and Decker bit set work with a Kobalt drill? Sorry if it's a stupid question, I'm ...
0
votes
2answers
115 views

How do I drill through a shaped tube with a handheld drill?

I'm assembling a corrugated sheet metal fence and I have installed the posts and attached the pieces of shaped tube (rectangular cross section) horizontally and now I need to attach the metal sheets ...
0
votes
2answers
60 views

Can I realistically replace my drill with a rotary hammer?

I find myself needing to do more and more stucco and concrete chipping work that is suitable for purchasing a rotary hammer. Can anyone here tell me if such tools can entirely replace a normal drill? ...
0
votes
2answers
203 views

Should I drill through the concrete garage wall to install a generator inlet switch inside?

I recently purchased a generator in the aftermath of the ice storms in the Northeast. I'm quit handy with the electrical wiring in my house and have no issue installing the proper circuit for the ...
0
votes
1answer
134 views

What type of adapter should I use to turn a cordless drill in to a corded drill?

I have old Bosch PSR12 driver/drill that all NiCA are dead. I've modified it successfully to work as Corded after removing batteries and connecting 12V 1.5A (220v) adapter. The drill works but when I ...
0
votes
0answers
25 views

drill 6 inches hole in 10 inches joist [duplicate]

I need to install a wall mount range hood. I would like run the duct into the ceiling and then drill through the 5 floor joists plus 1 rim joist. The joists are 2 by 10 inches. Will it be safe to ...
0
votes
1answer
178 views

How big a hole do I have to drill in concrete to embed rebar in it?

I have a concrete patio that I'd like to use as the foundation for a CMU wall. I'd like the CMUs to be tied into the patio slab with rebar. I get that the gist is to drill a hole in the slab, put ...
0
votes
0answers
165 views

How could a power drill trigger switch be damaged when used continuously in variable speed range?

I just acquired a DeWalt DCD790 cordless brushless drill/driver, and going through the manual, on page 10 under Speed Trigger Switch, I find the following: NOTE: Continuous use in variable speed ...
0
votes
0answers
140 views

How can I repair my hammer drill?

I have been using my bosch drill to power a small wood turning lathe. Now the drill is always in hammer drill mode even though it is not switched to hammer drill. I opened the drill up but it looks ...
0
votes
0answers
14 views

Are there adapters for different masonry bit types?

Are there adapters for using sds max bits in an sds plus drill or spline drive hammer drill or straight shank hammer drill?
0
votes
2answers
3k views

What is the correct method to determine the drill bit size from the measured threaded diameter?

I'm trying to decide the correct drill bit size for a hole I have to make to fit my thread. I measure the (major) diameter of the threaded section as 0.5325 inches. The threads are not supposed to ...
-1
votes
2answers
74 views

Drill tool unable to work when face up

I got a drill tool when I press the handle and face the drill bit up, it does not functioning at all but if I face it down, it works. What is the possible problem?
-1
votes
2answers
185 views

Drilling a hole

I have a set of drill bits but no drill. I need to make a hole in a thin surface prone to splitting and don't have a hand drill or a power drill on hand ; what could I use to make that hole?