Movable barriers at the entrance of buildings, rooms, cupboards, etc. which can be used to allow or deny access to the space beyond. Typically attached to surrounding structure using hinges, sliders, swivels, etc.

learn more… | top users | synonyms (1)

20
votes
6answers
31k views

How do I rehang a wooden door with worn screw holes?

I have a wood door in one of my rooms where the top screws no longer hold the hinge to the wall because the screw holes have worn loose. I have tried slightly larger screws and filling with wood ...
26
votes
10answers
59k views

Doors are sticky and noisy when opened?

For some reason, the doors in our house make a very loud "unsticking" sound when you open them. It's almost as if the paint isn't cured, since the sound seems to come from the contact area around the ...
30
votes
6answers
55k views

How do I drill a 2⅛ inch door knob hole over an existing 1½ inch hole?

I need to replace the door knob for this interior door: The door knobs I've found at the stores require a 2⅛ inch hole. Mine is only 1½: Did door knobs used to be smaller? Is there some place ...
12
votes
4answers
70k views

How do I fix a door frame that my dog chewed?

My dog chewed the bottom part of the doorframe to my bedroom. I live in a rented apartment, so this is not OK. Is there any way to fix it and make it look somewhat presentable (doesn't have to be ...
4
votes
3answers
15k views

How do I install a pre-hung door in a rough opening that's too wide?

I'm replacing an interior door -- including the original jamb -- in my house with a new 30" pre-hung door. With the jambs, the new door is 31 3/8" wide. However, the original rough opening is ...
13
votes
5answers
33k views

How do I adjust a door so it doesn't swing on its own?

I have a normal door, and left to its own devices it will simply rest about 20-30 degrees. It won't swing shut on its own, nor stay open on its own. It hangs a bit in the middle. Convenient enough to ...
9
votes
5answers
27k views

How can I fix a door that doesn't close because it doesn't fit the frame?

Two closet doors in my house won't close all the way. When they are about 85% closed, it stops because the top of the door is rubbing up against the frames. It looks like I need to move the door down ...
20
votes
7answers
197k views

How do you determine if a door is Right Handed (RH) or Left Handed (LH)?

I am replacing a few interior doors and I need to know if the existing door is Right Handed or Left Handed so I have them drilled correctly. Sounds like the acronyms for this are RH and LH. This ...
5
votes
4answers
16k views

How do I fix a hole in a hollow door?

My son sometimes has a temper, and has been known to hit his door when sent to his room. He has actually done so enough to punch a bit of a hole in it. I'm trying to figure out what might be doable to ...
3
votes
4answers
2k views

How to repaint a metal door and keep the paint from scratching off?

I need to paint an exterior door that not only is metal, but has a small amount of rust on the outer edges. The door is used quite often and takes a lot of wear and tear. The past paint jobs have not ...
2
votes
4answers
3k views

How can I reduce outside noise inside my apartment?

I would like to reduce the outside noise from inside my apartment. Outside, of my apartment is the hallway, and it can get noisy. I was thinking about placing felt pads on my door to reduce the ...
2
votes
1answer
545 views

What is causing discoloration on my bronze-finished lockset?

We bought a bronze finished lockset about five years ago, and now a lot of it is ashy looking and green in some places. It looks a little worse every year. It's on an exterior door facing west. ...
1
vote
2answers
2k views

I replaced my door hinges and now the door is too tight at the door jam. Why?

The original is a 3.5" square hinge and is 1/8" thick and replaced it with the same. With the old hinges in, I noticed 1/16" gap at the door jam. But, when I put the new hinges on and hung it, there ...
1
vote
2answers
1k views

How can I make a door open or close depending on the door position?

Almost every door needs to be either open or closed, rarely do we need it half open. Since the doors (not the band) in my home are old, some of them tend to open or close automatically because their ...
0
votes
2answers
120 views

What hinge is this?

Bit of a newbie to DIY here. We've moved in to a house that came with a summer house but the double doors were a bit wonky/wouldn't open easily without breaking in the door. I need to get 4 new ...
0
votes
3answers
455 views

How should I refinish vintage wooden closet doors?

I have old closet doors that look like this: The lacquer is worn out and aged and they look really bad but there are no visible scratches or dents. I am thinking of replacing the aged hardware ...
11
votes
3answers
15k views

How do I shift a door's latch hole and strike plate up or down half an inch?

I have a few interior doors that do not latch closed because the bolting mechanism and latch hole are vertically misaligned. If I remove the strike plate I can extend the size of the latch hole, but ...
4
votes
2answers
4k views

Fixing vintage glass doorknobs with loose glass to brass connection

I have a number of 1930's glass doorknobs which are loose, not at the set screw, but between the glass knob and the brass holder. Nearly every knob in the entire house has the same problem. They all ...
15
votes
7answers
11k views

Lubricant for squeaky doors

I'm looking for a long term solution to my squeaky doors. Our home is fitted with brass hinges on all doors and lately they have all been starting to squeak. I've tried several silicone based ...
8
votes
3answers
1k views

How do I remove hard soap scum on my shower door?

I have a problem with regards to my frameless glass shower door because I don't usually clean it regularly. What happens is that the lower edge of the glass door is already very cloudy and is very ...
12
votes
7answers
1k views

How do I clean stainless steel?

We have just finished building a house and we have some small stains on a stainless steel door handle. I was wondering what was the best way to remove them? Unfortunately I'm not sure what's caused ...
9
votes
1answer
12k views

How can I fix a hairline crack in a thin wood panel of an exterior door?

My 100-year-old house has a wooden front door made of thick wood ribs interspersed with 8 wood panels, each about 10" high, 8" wide, but only 1/8" or 3/16" thick. Perhaps the door originally had ...
3
votes
2answers
8k views

What primer and paint should I used for a solid-core wooden front door?

I recently purchased a new pre-hung exterior door for my house. We opted for a solid-core Douglas Fir instead of the fiberglass models as the wooden door was substantially cheaper. We want to paint ...
1
vote
1answer
50 views

What is the best type of insulation to use on a hinged metal attic door?

What is the best type of insulation to use on a hinged metal attic door (no integrated ladder)? Primarily concerned about heat entry through the door when closed. Also concerned about heat entry ...
0
votes
2answers
475 views

DIY door frame pull-up bar

I came to posses an amazing, strong metal alloy bar that would fit my door frame perfectly! I'd like to turn this into a pull-up bar and hang it onto the frame. What is the name of the things that I ...
8
votes
2answers
5k views

Any US building codes about a door opening into a hallway near a stairway?

A while ago I changed a door out from my tiny bathroom so that it opens outside of the bathroom and into the hallway. It looks attractive and provides a great deal more room in the bathroom making it ...
7
votes
4answers
16k views

How do I lubricate plastic rollers for sliding closet doors?

I just installed some new sliding closet doors, but unfortunately they're a bit squeaky/noisy when operating. They are "Reliabilt" doors from Lowes, the actual company that makes these is SGA. There's ...
5
votes
5answers
790 views

What can I do about pocket doors that are blocked by floor tiles?

I have double pocket doors in my den that I never close. I was going to clean them today, and when I tried to close them they would not close because of the tile being to high. I had the tile put in ...
5
votes
2answers
2k views

Why doesn't my freshly painted door fit back in the frame?

I took off a hollow core interior door to paint it. Very thin coats (this is only the second time it's been painted since contractors built house. I know they only sprayed 1 very thin coat). Now the ...
5
votes
1answer
7k views

How can I fit a door in a frame that is too small?

I bought some used French doors to replace a sliding door. The sliding door measured 96" X 60". The French doors measure 96" X 60¼". I made the mistake of not measuring both doors. I just ...
4
votes
4answers
7k views

How can I prevent hanging sliding doors from coming off track?

We've got a closet with a pair of overlapping sliding doors that hang, by their wheels, on a top-mounted rack. There's a bottom guide screwed to the floor that keeps the doors lined up. But unless a ...
4
votes
4answers
432 views

Where can I find a key for my old locks?

My house was build in 1938 and the whole house has these door knobs everywhere. I believe they were made by Dexter. Is there a way to ID them properly and, if so, where can I find someone who makes a ...
4
votes
2answers
13k views

How can double swinging closet doors be installed?

I have a coat closet that long ago had double sliding doors and now has no doors at all. I would like it to have double swinging doors, like french doors but without glass. I found a couple of ...
4
votes
1answer
2k views

How can I remove a Mortise Lock and deadbolt from a door?

I got an old door from a junk yard that I'm trying to reuse. The door is going to end up being sliding barn door so I have no use for its existing door knob and lock mechanisms. From what I can tell ...
4
votes
2answers
2k views

How can I repair a door that a dog chewed on?

My dog is an escape artist and managed to get out of her crate today. She then tried to chew her way through my bedroom door to escape confinement. Though unsuccessful, she did damage a significant ...
4
votes
3answers
3k views

Door jamb on a 2.5" thick wall

What approach can be used to fabricate and install a door jamb on a 2.5" thick wall? The wall is composed of 2x4 on side (1.5") and two sheets of 1/2" drywall. Edit: I have an old 5 panel door that ...
4
votes
1answer
2k views

What are some inexpensive options for replacing a single-stall garage door?

The house we recently purchased has a detached 3 1/2 car garage that has seen better days. The entrances to the garage door consist of a 2-stall garage door, and a 1-stall garage door. Luckily, the ...
3
votes
2answers
7k views

Quiet door latch

I have a bathroom door that is quite loud when operated. And when someone goes to the bathroom at night, it innevatibly wakes someone up (and baby room is just across from the bathroom!) there are 3 ...
3
votes
1answer
182 views

What causes seasonal doors and how do you prevent it?

I understand that wood expands and contracts based on temperature, humidity, and other factors... However in our house the doors are really subject to seasonal changes. For instance my bedroom door ...
3
votes
1answer
2k views

How do I install a pre-hung door in a thick exterior wall?

I live in an old DC rowhouse; it was built in 1908. I'd like to replace the house's two slab-hung exterior doors with newer pre-hung models with full-length lites to increase the natural light and to ...
3
votes
4answers
1k views

What are Automatic Garage Door Options for a Garage with a Low Ceiling Clearance?

I have a tuck under single car garage in my bungalow that currently has carriage doors that have seen better days. I would like to replace the carriage doors with an automatic (and insulated) door, ...
3
votes
1answer
7k views

How do I replace mortise locks with bored cylindrical locks?

I purchased an older home that has mortise locks in all of the doors. They're all very difficult to use and some of them don't work at all, making the doors difficult to impossible to close. Since I'm ...
2
votes
3answers
11k views

How can I keep my doors from expanding in the heat?

During the summer months, some of the doors in my house become difficult to open and close. I can get them to shut by either slamming the door or by pulling upwards on the doorknob before opening or ...
1
vote
0answers
53 views

How can I swap sliding door panels?

I have a patio door with the sliding panel on the outside track rather than the inside. can I swap the panels without doing major surgery.
1
vote
2answers
2k views

Replacing a door's glass panel with a wood panel

I basically have the following type of back door: The problem is that my girlfriend moved in with me. Well not, really, her dog did and we need to install a pet door. The problem is I need the ...
1
vote
1answer
399 views

Consistent way to sand and repaint doors?

I have several closet and bedroom doors that are currently varnished/stained, which I want to sand down and paint a semi-gloss white. Should I do something other than sanding to remove the varnish, ...
0
votes
1answer
79 views

How to make the doorframe not hideous

The frame of my front door looks, for lack of a better word, hideous: The holes in the frame itself aren't what concerns me--there was a security screen door there before, and I will probably ...
0
votes
1answer
89 views

How to keep door open or closed automatically?

Our bathroom door is not closing properly or people forget to close it, and then it makes noise when the wind moves it. I would like to implement something like in the Q&A "How can I make a door ...
0
votes
1answer
365 views

What do I do with a 1 11/16" gap when installing a new pre-hung door?

I am replacing a door with a pre-hung door including the jamb. The old door was 29 11/16" wide. The new pre-hung door is 28". Is this too big of a gap? Should I make it plumb on one side and make up ...
0
votes
1answer
3k views

Flip a door frame?

I have a door that opens right to left into a room. I want it to instead open left to right out of the room. In other words, flip the door. Is there a way to do this that preserves the existing ...