Movable barriers at the entrance of buildings, rooms, cupboards, etc. which can be used to allow or deny access to the space beyond. Typically attached to surrounding structure using hinges, sliders, swivels, etc.

learn more… | top users | synonyms (1)

26
votes
5answers
23k views

How do I drill a 2⅛ inch door knob hole over an existing 1½ inch hole?

I need to replace the door knob for this interior door: The door knobs I've found at the stores require a 2⅛ inch hole. Mine is only 1½: Did door knobs used to be smaller? Is there some place ...
1
vote
1answer
528 views

How do I stop a sliding door from squeaking?

I have a sliding door which makes quite a loud squeaking sound when it is opened or closed. As best I can tell the sound is coming from the door rubbing against a metallic guide at the bottom as shown ...
3
votes
1answer
795 views

How can I remove a Mortise Lock and deadbolt from a door?

I got an old door from a junk yard that I'm trying to reuse. The door is going to end up being sliding barn door so I have no use for its existing door knob and lock mechanisms. From what I can tell ...
7
votes
3answers
13k views

Should we install carpet before the baseboard and door casings?

We just had a carpet layer come in for measurements and a quote. We've not put in the baseboard or door casings yet, but the carpet layer has suggested that this will make things easier. Is this true ...
3
votes
2answers
890 views

Are cripple studs necessary for framing a door in a “decorative wall”

With a rather large living room in my 1bd appartment, I'm building a semi-permanent partition to split off a second smaller bedroom. The partition will be a standard framed wall and put in place ...
6
votes
1answer
140 views

What do I need to know before selecting and installing a cat/pet door in a door?

We want to (finally) install a pet door for our cat. It will most likely be a model that will install in the laundry room door, the optimal location for it in our house. This brings me to my first ...
1
vote
1answer
532 views

Push button lock unlocks when knob turned

Recently my bedroom lock (a push button lock) has been acting funny. It's hard to push the button in and the button and handle sort of need to be jiggled to push it in all the way. Once it's in it ...
4
votes
1answer
684 views

How do I fix a loose door frame?

I'm attempting to repair an interior door that is sticking. I first thought the problem was with the door but I soon discovered that the door frame is loose at the base. (see image) I guess I have ...
2
votes
2answers
889 views

Where can I find a Time Restricted Keypad Lock?

I'm looking for a keypad to use in the external door of an small business office to open said door. The plan is to give every employee (around 20) a PIN that they input into the keypad for the door to ...
2
votes
2answers
346 views

Are there any simple electronic door locks available?

I have an office door I need to keep locked but allow easy access. It doesn't have to be super secure, it has a proper deadlock for when we are closed, it just has to stop people casually walking in. ...
11
votes
5answers
8k views

How do I adjust a door so it doesn't swing on its own?

I have a normal door, and left to its own devices it will simply rest about 20-30 degrees. It won't swing shut on its own, nor stay open on its own. It hangs a bit in the middle. Convenient enough to ...
4
votes
1answer
302 views

What do you call the rubber strip attached to cupboard door?

My bathroom has a white cabinet, where one of the doors has an adhesive rubber strip running down the inside of the door. This is so when both doors are closed, you cant see a big black gap in the ...
4
votes
2answers
4k views

How can I soundproof a bathroom door?

I'd like to make one of my bathrooms that one special place where a guest can go about their business in peace. Essentially, I am going to be soundproofing/insulating my entire bathroom, but the ...
5
votes
2answers
458 views

Why doesn't my door close properly after an earthquake?

After the earthquake I noticed our back door has gotten really hard to close. You have to slam it and give it a booty bump in order to get it shut. To open it, I have to use all my weight to yank it ...
3
votes
5answers
3k views

How can I block or fill out a letterbox hole in my door?

I have a letterbox in my front door that is never used, so I would like to remove it and fill the hole, preferably so it doesn't look like there was ever one there. Or insert something that fills the ...
2
votes
1answer
343 views

What is causing discoloration on my bronze-finished lockset?

We bought a bronze finished lockset about five years ago, and now a lot of it is ashy looking and green in some places. It looks a little worse every year. It's on an exterior door facing west. ...
4
votes
1answer
764 views

How can I repair a door that a dog chewed on?

My dog is an escape artist and managed to get out of her crate today. She then tried to chew her way through my bedroom door to escape confinement. Though unsuccessful, she did damage a significant ...
2
votes
2answers
1k views

Where can I get a new key for an old lock?

There are two locks on my apartment door. The key to the bottom lock was lost long ago - before I moved in - and we now just use the top lock. The bottom lock is probably 50-60 years old and ...
4
votes
1answer
793 views

What do I need to do to restore a wooden entry door?

I'm going to give it a try rather then buying a new door. I have a wooden door (veneer on both sides) with some decorative mouldings. My plan is to use a heat gun to get as much paint off as possible ...
2
votes
1answer
380 views

Which side of door should I install a threshold draft excluder?

I purchased this door bottom, MD Building Products 3 ft. x 1-3/4 in. x 1-5/8 in. Vinyl Door-Bottom Moulding, and the directions are straight forward except they don't indicate which side of the door ...
29
votes
13answers
7k views

How do I ensure the bathroom door stays open unless someone is inside?

When my windows are open, the wind can slam the bathroom door shut. I don't want this to happen when my cat is in the doorway (dead cat), or inside the bathroom with no one home (locked in with ...
4
votes
1answer
261 views

Installing a new exterior door into a taller existing opening

We are remodeling our 1948 home, and the previous owner was quite tall. We are trying to replace our exterior door, and have come across a wonderful deal on a door. Here is the issue: How can I make ...
2
votes
4answers
3k views

Remove plastic film from the outside of a metal door?

I forgot to remove the plastic protective film from the outside of a metal door. The door is white prime/painted. I was able to remove the film from the inside of the door, but the outside is baked on ...
5
votes
1answer
1k views

What to know before installing cabinet and drawer dampers?

I want to install dampers on my new cabinet doors in my kitchen. When the contractor gave me the price to add these, the cost was over $30 per door. So I decided not to install them. But since then, I ...
3
votes
1answer
632 views

When will drilling through wall members affect structural integrity?

When can you freely drill medium to large sized holes in studs or door jambs, and when do you need to be concerned about damaging the structural integrity of the structure?
4
votes
3answers
9k views

How to stop a door from banging while closing

Besides closing it very slowly, any good tricks / gadgets that will slow down the door so it doesn't close with a thud?
2
votes
3answers
12k views

How to remove a stuck key?

A hypothetical question - if I get a key in the door lock from one side of the door, could I somehow use another key to open the door from the other side? And what if you could "engineer" the stuck ...
2
votes
1answer
5k views

Wood knots showing through gloss paint on knotty pine doors despite applying knotting solution prior to painting

I painted some knotty pine doors about 3 years ago but (despite applying knotting solution) knots are showing through on nearly all of them! I followed the instructions on the bottle of the knotting ...
5
votes
5answers
1k views

Home wireless lock

How can I improve my home with a kind of front door lock that would act like those car that can unlock when it receive signal of the key in your pant? My goal would be to keep my keys in my pant ...
4
votes
2answers
564 views

How can I locate the doorbell transformer?

my doorbell stopped working and I tested it with a multimeter and found no current to the box. How do I locate the transformer to replace it?
4
votes
1answer
165 views

Refastening a cabinet door

A cabinet door in my kitchen detached from the cabinet- the screws are about 1/2" long and weren't enough to hold the door in place. The screws are short to keep them from poking out the back side of ...
5
votes
2answers
4k views

How can I fit a door in a frame that is too small?

I bought some used French doors to replace a sliding door. The sliding door measured 96" X 60". The French doors measure 96" X 60¼". I made the mistake of not measuring both doors. I just ...
4
votes
3answers
963 views

Door jamb on a 2.5" thick wall

What approach can be used to fabricate and install a door jamb on a 2.5" thick wall? The wall is composed of 2x4 on side (1.5") and two sheets of 1/2" drywall. Edit: I have an old 5 panel door that ...
1
vote
3answers
4k views

How can I keep my doors from expanding in the heat?

During the summer months, some of the doors in my house become difficult to open and close. I can get them to shut by either slamming the door or by pulling upwards on the doorknob before opening or ...
6
votes
5answers
3k views

Do I need a wood hardener for worn door hinge screw holes?

My house had a door removed by previous owners. The recesses in the jambs for hinges and catch were filled in with pieces of board (I don't know exactly what, but not solid timber), and painted over. ...
6
votes
1answer
150 views

Selecting a sliding patio door

I live in the Boulder Colorado area where we have hot intense sunny summer days, and below zero freezing winter nights. We are planning to install a sliding patio door in a south facing full sun area. ...
3
votes
1answer
337 views

How do I take door hinges that have a pivot ending with two flat cylinders apart?

I found a door with a pair of hinges that look like most ordinary door hinges but don't let the door to be taken off the doorpost. They seem to have a pivot that passes through the whole height of a ...
3
votes
4answers
8k views

Why does my latch not retract when I push or swing the door shut, but will retract when the knob/lever is used?

This just started today. I have to turn the knob in order for the latch to retract. Before, I could just push to door shut and the latch would retract when it hit the plate on the door frame. But now ...
1
vote
2answers
2k views

How should I prepare a steel door for painting?

I have two typical steel entry doors that were factory primed. They were installed 8 years ago in a new addition on my home. I am finally (!?) getting ready to paint them. The interior finish paint ...
4
votes
3answers
373 views

Repairing a hole in a door

I now have a wonderful hole in a bathroom door, as a result of door-stop not being installed in the proper place, and the door being shoved up against a towel rail (picture attached). As can be seen, ...
7
votes
1answer
433 views

Can I replace / recreate a tri-fold garage door with three fiberglass flush doors?

My garage has three wooden doors that cover the opening. The middle one's hinges are attached to the right door. The left and the right doors' hinges are attached to the walls. This way you could ...
17
votes
4answers
8k views

How do I rehang a wooden door with worn screw holes?

I have a wood door in one of my rooms where the top screws no longer hold the hinge to the wall because the screw holes have worn loose. I have tried slightly larger screws and filling with wood ...
1
vote
1answer
525 views

Exterior entry door repair

I have a 20 year old flat wood entry door (without mouldings or embellishment). I was going to sand and paint it, but when I sanded, I realized that the wood must have been just a veneer (plywood, ...
0
votes
1answer
1k views

Protecting a finished wood exterior door

I have a solid wood exterior door, that I had stained and finished by the maker. I was looking for a way to prolong and protect the finish. I thought about waxing the door (especially the exterior ...
2
votes
1answer
358 views

what parameters should I look for when choosing an electric deadbolt?

I am looking for electric deadbolts for external steel doors - to place several of them on a door - one on each side (top, bottom, left, right) for extra security. I want to buy just the deadbolt ...
1
vote
1answer
67 views

Shopping for French Doors

I currently have a sliding door that is 60X96. I want to replace it with french doors. I'm looking at DIY and am wondering whether to go used or new. I was hoping to stay at 500 or less, which ...
1
vote
2answers
515 views

Tips for removing drywall from bottom of closet header

So about two years ago, I added a header to make my closets standard height, instead of being full 8' doors (which, even without doors, made the rooms look much more modern). Unfortunately, I made a ...
3
votes
4answers
789 views

What are Automatic Garage Door Options for a Garage with a Low Ceiling Clearance?

I have a tuck under single car garage in my bungalow that currently has carriage doors that have seen better days. I would like to replace the carriage doors with an automatic (and insulated) door, ...
1
vote
1answer
193 views

Using screws to install a set of french doors?

I am installing a set of french doors. I have installed many doors before, but I was curious as to whether or not anyone has tried using countersunk screws to install the door? If I needed to adjust ...
1
vote
1answer
114 views

Indoor sliding doors now stick at the top after replacing rollers

I have sliding doors for a wardrobe, and i replaced the roller-wheels. Now they stick at the top, its as if they are too close together. I replaced the wheels in the same spot on the door, but they ...