Movable barriers at the entrance of buildings, rooms, cupboards, etc. which can be used to allow or deny access to the space beyond. Typically attached to surrounding structure using hinges, sliders, swivels, etc.

learn more… | top users | synonyms (1)

4
votes
2answers
3k views

How can I locate the doorbell transformer?

my doorbell stopped working and I tested it with a multimeter and found no current to the box. How do I locate the transformer to replace it?
4
votes
1answer
239 views

Refastening a cabinet door

A cabinet door in my kitchen detached from the cabinet- the screws are about 1/2" long and weren't enough to hold the door in place. The screws are short to keep them from poking out the back side of ...
4
votes
3answers
3k views

Door jamb on a 2.5" thick wall

What approach can be used to fabricate and install a door jamb on a 2.5" thick wall? The wall is composed of 2x4 on side (1.5") and two sheets of 1/2" drywall. Edit: I have an old 5 panel door that ...
4
votes
1answer
10k views

What are some tips for fixing gaps between door and jamb in an exterior door?

I have an exterior door that was apparently installed by unskilled monkeys. The gap between the jamb and door when it is closed goes from close to normal (1/4") at the top to large enough to see ...
4
votes
1answer
129 views

how can I clean a prefinished door?

I have a prefinished bedroom door and it appears to have developed a grey patch that looks like grease. The patch isn't grease, however it just appeared by itself. Any help as to how I can get clean ...
4
votes
1answer
739 views

How to fix a door that closes, but is still too close to the frame, causing the hinge to pull out

I installed a new door that closes, but the door is too close to the frame on the bottom hinge side. This causes the bottom hinge to close completely before the door is closed, which leads to the ...
4
votes
1answer
3k views

How should I build an exterior door landing pad?

I've got a building with several exterior doors (all opening inward). The slab and walk-up is about 18+" from the ground. Code requires that I have a 36"x36" landing pad outside each exterior door. ...
4
votes
1answer
6k views

What would cause my door to not close even though it fits in the frame?

I installed a new door on an old frame. However, when I attached the hinges the door doesn't want to close even though I still have plenty of room on the door handle side for it to close. How do I ...
4
votes
1answer
2k views

How can I remove a Mortise Lock and deadbolt from a door?

I got an old door from a junk yard that I'm trying to reuse. The door is going to end up being sliding barn door so I have no use for its existing door knob and lock mechanisms. From what I can tell ...
4
votes
1answer
2k views

What are some inexpensive options for replacing a single-stall garage door?

The house we recently purchased has a detached 3 1/2 car garage that has seen better days. The entrances to the garage door consist of a 2-stall garage door, and a 1-stall garage door. Luckily, the ...
4
votes
3answers
1k views

How should I prepare doors and windows for painting?

I'm mostly interested in what is the best way to protect the wood from bad weather, but any other advice on how to improve overall quality of work would be appreciated.
4
votes
3answers
1k views

How can I install modern locksets on these interior doors?

I've recently bought my first house which I'm very excited about, got into the decorating phase and decided to replace the door handles - some of which were damaged - with nice new ones. Being a ...
4
votes
1answer
1k views

How do I fix a loose door frame?

I'm attempting to repair an interior door that is sticking. I first thought the problem was with the door but I soon discovered that the door frame is loose at the base. (see image) I guess I have ...
4
votes
1answer
1k views

What do I need to do to restore a wooden entry door?

I'm going to give it a try rather then buying a new door. I have a wooden door (veneer on both sides) with some decorative mouldings. My plan is to use a heat gun to get as much paint off as possible ...
4
votes
1answer
606 views

Is it necessary to notch the side door jambs for setting the header piece?

I need to make my own door jambs from 1x lumber because I have a salvaged antique transom (the whole door is actually restored antique) and couldn't find pre-made ones at Lowes/HD that are long ...
4
votes
2answers
88 views

Does a door have to be hung on the edge of the jamb

My door jamb is around 140mm, does the door have to be hung on the edge of the jamb like all the other doors in the house, or can i hang it toward the center of the jamb by 70mm so it can clear a wash ...
4
votes
2answers
3k views

How do I stabilize a knob on a hollow-core bifold door?

The knobs on all my bifold closet doors are loose and spin around. The knob is mounted in an aesthetically pleasing position in the middle of the door. The problem is that the door is hollow at this ...
4
votes
2answers
37k views

How do I fix an exterior door knob that will unlock but not turn?

My back door (which is only two years old) has a door knob that recently suddenly stopped turning. I can lock and unlock it, but it just won't turn. Here's a picture of the inside of the door knob: ...
4
votes
1answer
421 views

What do you call the rubber strip attached to cupboard door?

My bathroom has a white cabinet, where one of the doors has an adhesive rubber strip running down the inside of the door. This is so when both doors are closed, you cant see a big black gap in the ...
4
votes
1answer
563 views

Installing a new exterior door into a taller existing opening

We are remodeling our 1948 home, and the previous owner was quite tall. We are trying to replace our exterior door, and have come across a wonderful deal on a door. Here is the issue: How can I make ...
4
votes
1answer
4k views

How do I fix a pocket door wheel track?

I have a pocket door that keeps falling off its track. The metal track has become warped and bent down in just one or two areas. When I slide the door along the track and the front wheel goes over ...
4
votes
1answer
60 views

Metal doors, Mortise locks, and … mobile liner?

Spent last night retrofitting a fancy electronic combination lock on a metal door for the first time, and encountered something I don't understand. The door has previously had another mortise lock, ...
4
votes
1answer
797 views

Can I use a magnetic air seal on an exterior door?

It occurred to me it may be a good idea to air seal an outdoor door using a similar magnetic seal as refrigerator doors. I can't find this product available today. Maybe because it would make opening ...
4
votes
2answers
2k views

How can I repair a door that a dog chewed on?

My dog is an escape artist and managed to get out of her crate today. She then tried to chew her way through my bedroom door to escape confinement. Though unsuccessful, she did damage a significant ...
3
votes
6answers
2k views

Should I replace or repair my dead/dying garage door?

My garage door opener is on its last legs, should I replace it or try to fix it? Symptoms: The door does not initially move when the button is pushed, but after giving the door a boost it opens. ...
3
votes
5answers
3k views

How do I slow down a pocket door when opening and closing?

I had a pocket door installed in 2009 and the pocket door slides way too fast when opening and closing. I can't work out how to slow it down.
3
votes
6answers
34k views

Why does my latch not retract when I push or swing the door shut, but will retract when the knob/lever is used?

This just started today. I have to turn the knob in order for the latch to retract. Before, I could just push to door shut and the latch would retract when it hit the plate on the door frame. But now ...
3
votes
4answers
1k views

What are Automatic Garage Door Options for a Garage with a Low Ceiling Clearance?

I have a tuck under single car garage in my bungalow that currently has carriage doors that have seen better days. I would like to replace the carriage doors with an automatic (and insulated) door, ...
3
votes
5answers
10k views

How do I repair a door jamb that has soft and split wood at the hinge in my 100 year old house?

We have an old house (100+ years) with original door frames. The top hinge on one door has come away from the door frame - the wood is split and soft, so the screws have no bite. I'm thinking the ...
3
votes
4answers
172 views

Is it normal to miter the non-pivoting edge of a door?

Recently I've seen someone miter the edge of a bathroom and closet door so it swings shut without hitting the door frame. I've never seen this before -- is it normal? Clarification: The edge that was ...
3
votes
3answers
260 views

How do I fix a door that's sticking closed?

I have a few doors in my house that tend to stick when you try to open them. A few of these I was able to fix by tightening loose screws or repairing stripped screw-holes, which got the hinge plates ...
3
votes
4answers
2k views

What natural-wood finish should I use to protect a door from pet scratches?

I'm installing a new solid-core wood door in one of my bedrooms. I want the door to have a natural wood look. However, I have a dog who will scratch at the door to open it looking for me / squeaky ...
3
votes
3answers
149 views

Jack and Jill bathroom light sensing door locks

I have an interior Jack and Jill bathroom that is connected to two bedrooms. I'm trying to solve the problem of someone locking the other door when using the bathroom and then forgetting to unlock it ...
3
votes
2answers
255 views

should door locks and deadlocks be keyed the same

Should door locks and deadlocks be keyed the same. Is there any advantage or disadvantage (besides having more then one key) in having them keyed different?
3
votes
3answers
239 views

What is a quick and easy way to disable a door so you can no longer use it?

I have a two story home with a one story garage attached. The garage has a flat roof. I can access the roof through a door in my upstairs bedroom. At one time the garage roof had a fence around the ...
3
votes
2answers
733 views

How to add door trim where there isn't enough room?

I'm adding molding to my living room, but have one entryway where there isn't enough room on the side to add the full width of the pilaster. What are my options? I do plan on having a 5" base ...
3
votes
2answers
3k views

Are cripple studs necessary for framing a door in a “decorative wall”

With a rather large living room in my 1bd appartment, I'm building a semi-permanent partition to split off a second smaller bedroom. The partition will be a standard framed wall and put in place ...
3
votes
1answer
849 views

When will drilling through wall members affect structural integrity?

When can you freely drill medium to large sized holes in studs or door jambs, and when do you need to be concerned about damaging the structural integrity of the structure?
3
votes
2answers
8k views

What primer and paint should I used for a solid-core wooden front door?

I recently purchased a new pre-hung exterior door for my house. We opted for a solid-core Douglas Fir instead of the fiberglass models as the wooden door was substantially cheaper. We want to paint ...
3
votes
3answers
78 views

Can I convert door slab from LH inswing to RH inswing

I like my current wooden front door a great deal, but it's hinged to swing inward to the right, and traffic flow (getting a bike into the mud room, for example) would be a lot easier if it swung in to ...
3
votes
1answer
413 views

How do I repair this interior door?

I am trying to fix a door that the kids broke. Should I use use wood glue, clamps, and some small nails?
3
votes
1answer
404 views

What kind of (1950s era) lock is this

My home, built in the late 1950s, has these cute little additional locks on top of the main doorknobs to many of the interior rooms. I can't seem to find the correct term for these locks, which would ...
3
votes
2answers
735 views

How do I replace a door hinge with no screws?

Any ideas on how I can remove this ugly looking hinge that snapped. One end of the hinge has no screws and is soldered onto the door. Any help is much appreciated. EDIT: Ok, I followed @Chris ...
3
votes
1answer
13k views

Doors have stopped closing due to humidity, how can I close my doors?

I have a few doors in my house that will not close at the moment due to humidity and I was wondering what is the smartest course of action would be. 1 door will not close due to expanding past the ...
3
votes
1answer
1k views

Can I repair hairline cracks in a solid wood exterior door with clear silicone caulk?

My front doors have several small hairline cracks around the door panels. I would like to seal them. Can I use clear silicone caulking without damage to the stained surface? Do I need to clean or prep ...
3
votes
3answers
832 views

How can I find out where a door is sticking? [duplicate]

Possible Duplicate: Doors are sticky and noisy when opened? We have several old doors in our house, with possibly a great deal of paint build up on them. As a result they are very ...
3
votes
2answers
779 views

Doorbell became very soft, battery replacement only necessary?

My doorbell ("speaker" portion pictured above) got very soft today. It still chimes, but just barely. I'm guessing it's battery-operated and the batteries are weak, but how can I tell for ...
3
votes
3answers
913 views

How do I know if my wood front door's finish is weather proof?

We just moved into a new home. The wood front door is semi-sheltered by a small porch. The front of the house has southern exposure and has the most exposure to the weather. There was an unsightly ...
3
votes
1answer
2k views

Do you really *have* to mortise for hinges and other door hardware?

I am wondering if it's entirely necessary to mortise a door and jamb for hinges and other miscellaneous door hardware. The only thing I can think of is that, in addition to being screwed in, the ...
3
votes
3answers
40k views

How can I open my garage door from the outside with a dead opener?

This morning I found myself locked out of my garage. My interior wall opener isn't working and neither is the remote. The light on the interior pad is out, suggesting a loss of power. Unfortunately, ...