Movable barriers at the entrance of buildings, rooms, cupboards, etc. which can be used to allow or deny access to the space beyond. Typically attached to surrounding structure using hinges, sliders, swivels, etc.

learn more… | top users | synonyms (1)

4
votes
1answer
1k views

What is the name of this cast metal part inside my lockset?

I have a Baldwin front door lockset that doesn't completely retract the latch when using the thumb lever. The handleset is similar to this: model After dismantling the thumb latch assembly, I ...
5
votes
2answers
787 views

How to adjust when hinge mortises are cut too deep?

I cut my mortises manually with a chisel and made them a notch too deep, maybe 1/16" or even less, as a result the door closes too close to the jamb and I am concerned how it will work when there is ...
3
votes
2answers
5k views

How do I fix interior and exterior doors that do not close properly?

I have a couple doors in my house that are having problems. I know that I likely have foundation problems, but I can't afford the $6000 - $10000 to have that fixed at the moment. I need an interim ...
2
votes
1answer
378 views

How do I reattach a door handle lever with a concealed screw

A door handle to one of the rooms in my apartment has come loose. I cannot find an exact match online but it is similar in construction to this door handle. The issue is that the lever part has come ...
2
votes
2answers
154 views

How can we security manage keys for a co-op building?

After having some security incidents in our building, we have decided to change the locks and we are looking at a solution whereby we (co-op board) can give out to residents keys that cannot be ...
3
votes
1answer
174 views

Should door jamb be lifted off subfloor or touching?

Simple question: when installing a custom made door jamb, should it be sitting directly on top of the subfloor or be lifted up a little (like drywall is lifted 1/2", for example)?
2
votes
1answer
201 views

How should I install a door that is not pre-hung and has a custom jamb?

I have an antique restored interior door with a transom for which I have to make my own jamb due to the height of the side jambs (big boxes sell only 80" door jambs). Should I A) assemble the jamb ...
4
votes
1answer
304 views

Is it necessary to notch the side door jambs for setting the header piece?

I need to make my own door jambs from 1x lumber because I have a salvaged antique transom (the whole door is actually restored antique) and couldn't find pre-made ones at Lowes/HD that are long ...
2
votes
1answer
206 views

How to improve sound isolation of an interior door?

Interior doors of the type frequently used in rented housing (I'm speaking in particular of apartments) seem to be hollow and do not do a very good job of sound insulation. If for example a laundry ...
2
votes
1answer
271 views

Why does recommended door rough opening height add 2-1/2" to door height?

I am skeptical about the recommended 2-1/2" addition to the door height for an interior door rough opening (assuming only subfloor). Consider the following estimated (meaning I am unsure if they are ...
1
vote
1answer
491 views

How do I attach a drywall corner bead to a wood door jamb?

I am installing a door into a wall and I do not want to have casing on the door. I want to install corner bead directly to the door jamb to create a "hidden door". It seems that typical corner bead is ...
3
votes
1answer
147 views

Can I convert a basement window to a door?

We have a poured concrete basement, serving as the foundation of our home, which was built in 2008 in central Minnesota. The basement has 3 vinyl windows, the sills of which are around 1' above ...
5
votes
4answers
1k views

How can I build a screen door?

I have a guesthouse with an unusual door, 32" x 76", and it needs a screen door. Home Depot has tons of cheap-o screen doors that could be cut down to maybe 32" x 78" safely, but an additional two ...
3
votes
1answer
820 views

How do I seal around a door to make the opening more sound-proof?

I live in an apartment condo. The noise from the very loud neighbour comes through the door spaces. I wish to seal off all of her noise. My walls are brick and are good. But the door going out to ...
5
votes
1answer
627 views

What should I check when troubleshooting a doorbell?

Our doorbell stopped working a while ago and my wife finally bugged me enough to fix it. First, I found a diagram on another site when I googled this. It is wired like the right box: I started by ...
2
votes
1answer
440 views

How do I stop the rubber sweep on my front door from squeaking as it moves against the floor?

The main door into my house has rubber at the base of it and it has started to squeak against the wooden floor when opened. How do I fix this problem?
2
votes
1answer
453 views

How to reattach front door rain deflector?

The rain deflector from the bottom of our front door recently fell off when I trod on it by mistake. The door and deflector are both wooden. The deflector was stuck on, not screwed. I'm not quite ...
6
votes
4answers
1k views

How to rescue exterior door paint job?

I have a newly installed exterior metal paneled door that was still dirty when painted. Also embedded in the paint job are bits of foam rubber from the brush, lint from a paint roller and hair from an ...
4
votes
3answers
508 views

How can I install modern locksets on these interior doors?

I've recently bought my first house which I'm very excited about, got into the decorating phase and decided to replace the door handles - some of which were damaged - with nice new ones. Being a ...
3
votes
1answer
122 views

What causes seasonal doors and how do you prevent it?

I understand that wood expands and contracts based on temperature, humidity, and other factors... However in our house the doors are really subject to seasonal changes. For instance my bedroom door ...
5
votes
6answers
728 views

How do I prevent doors on a media cabinet from sagging?

A friend and I have just built a floor to ceiling media shelf unit for DVDs. It has 9 shelves and is about 3' wide. The frame around it is made up of 2"x8" boards and the shelves (except for one in ...
3
votes
2answers
131 views

How can I have a light turn on when a pocket door is opened?

I'm building a new home with quite a few pocket doors and would like to know if there is a way for the pantry and utility room lights to come on when the pocket door slides open.
1
vote
1answer
353 views

How do I build an “internal frame” for a reclaimed wood door?

I heard that doors like the one below are made with an internal frame, and then it receives the faces of reclaimed wood. How is the frame constructed and how are the wood boards fastened to the ...
1
vote
2answers
4k views

How can I make a copy of a door key without a matching blank?

We have an old numbered key, that looks like a regular key, but it seems it is numbered, so the locksmith refuses to copy it without our landlord coming with the original. Our landlord would ...
4
votes
2answers
76 views

Does a door have to be hung on the edge of the jamb

My door jamb is around 140mm, does the door have to be hung on the edge of the jamb like all the other doors in the house, or can i hang it toward the center of the jamb by 70mm so it can clear a wash ...
3
votes
2answers
501 views

How can I replace the roller mechanism on this door?

I have a cupboard in my kitchen that has a roller front door. A few months ago the roller mechanism broke. I need an inexpensive solution for replacing it. I have looked around but can't find a ...
2
votes
3answers
549 views

Where to find very old door knob handle / deadbolt set?

I have a townhouse unit with a very old door knob / deadbolt set that I want to replace because the key doesn't fit well and you have to know how to "jiggle" it in order to get the door to unlock. ...
4
votes
3answers
1k views

How do I repair a warped sliding glass door track?

I have a sliding glass door that barely opens and often jumps off the track. The track under the door is bent and chipped. Is this normal wear and tear? Would raising the wheels fix it? Do I need ...
1
vote
1answer
341 views

What framing is needed for swinging closet doors?

How do you frame an existing, finished opening for double swinging closet doors to be installed?
1
vote
2answers
572 views

How do I prepare doors to be hung?

Changing out interior doors in house. All of them. Going from brown crap to white 6 panel. I have two hinges on each door. Would like to buy new door with predrilled knob hole, cut it down ...
6
votes
1answer
1k views

Can I safely make a door frame taller?

UPDATE: April 22 What I ended up doing was removing the trim non-destructively. Above the door frame, it was clearly not load bearing, so I continued and was not so non-destructive. The end-result ...
3
votes
1answer
911 views

Do you really *have* to mortise for hinges and other door hardware?

I am wondering if it's entirely necessary to mortise a door and jamb for hinges and other miscellaneous door hardware. The only thing I can think of is that, in addition to being screwed in, the ...
2
votes
3answers
840 views

How to narrow a closet door opening?

I have a closet opening that has never had a door on it (has had a curtan on a rod for 30+ years). I'd like to install a bi-fold or similar closet door. The problem is that the door opening is 44 ...
2
votes
2answers
141 views

What do I need to do to finish this outside-door install properly?

A new steel door was installed to our unfinished garage but I am not satisfied with how it currently looks. The previous door had trim covering the gap between the siding and the door, as well as the ...
0
votes
3answers
371 views

Does such a door knob/handle exist that has the latch bolt installed on the outside of the door?

I am building a custom, soundproof door out of two layers of 3/4" MDF. It's not as rigid as I'd like it to be and has a bit of bow to it which will eventually compromise the neoprene seal that I will ...
0
votes
2answers
422 views

How should I re-fit a coat hook onto a door?

We had a coat hook screwed onto the solid part of a bedroom door and it served well for about 10 years, but it has now fallen off and the screws won't re-secure. I have considered filling the holes ...
1
vote
4answers
531 views

How can I rehang heavy fire doors?

I need to re-hang a sagging door (actually several). I've seen this question and answer, but wonder if my situation doesn't call for something a bit different. My issues: 1) its a heavy fire-door ...
2
votes
2answers
188 views

What type of hinges do I need for this cupboard?

We are tiling our bathroom and want to tile the built in cupboard, which has 2 doors inset into a wooden frame. So that we don't need to leave a wide gap between the tiles at the edge of the door and ...
4
votes
2answers
1k views

How do I stabilize a knob on a hollow-core bifold door?

The knobs on all my bifold closet doors are loose and spin around. The knob is mounted in an aesthetically pleasing position in the middle of the door. The problem is that the door is hollow at this ...
5
votes
3answers
10k views

Should I paint door hinges?

Is it better to paint door hinges when painting a door and frame or should I remove them so they keep a metal look? I've hung a new door with new hinges and am about to paint. Most of the doors I see ...
1
vote
1answer
406 views

How do I replace the front door on a stucco house?

I'm going to be taking out the various floors that have been laid in our house down to the sub floor so wood flooring can be laid. But in doing so the floor will be about 1 inch lower than what it ...
0
votes
1answer
432 views

Can I replace just the plastic frame around the glass panes on my front door?

My dog chewed pieces of the frame molding around the glass panes on my front door in the house I am renting....can I just replace that plastic/fiberglass molding?
3
votes
2answers
14k views

How do I fix an exterior door knob that will unlock but not turn?

My back door (which is only two years old) has a door knob that recently suddenly stopped turning. I can lock and unlock it, but it just won't turn. Here's a picture of the inside of the door knob: ...
2
votes
2answers
898 views

How should I install slab doors when the jamb has been drywalled over?

All of my bedrooms have 36" cupboards with bi-fold doors that I want to replace with two 18" double-doors. All of the door jambs are covered in 1/2" drywall. I've made a few test holes and there ...
3
votes
2answers
428 views

How do I replace a door hinge with no screws?

Any ideas on how I can remove this ugly looking hinge that snapped. One end of the hinge has no screws and is soldered onto the door. Any help is much appreciated. EDIT: Ok, I followed @Chris ...
1
vote
3answers
419 views

What cut of wood should I use for door stile & rails?

I'm starting a project to build a pair of bi-fold doors for a closet (its an odd size, and so there are no prebuilt doors of the required size). I've done research on building the doors, and think I ...
3
votes
5answers
1k views

How do I slow down a pocket door when opening and closing?

I had a pocket door installed in 2009 and the pocket door slides way too fast when opening and closing. I can't work out how to slow it down.
2
votes
1answer
388 views

What is causing my front door to sweat?

The front door of my house (which is rarely ever used) sweats so badly during the winter. At first I thought it was just the glass, but after a closer look it appears that the rescued areas are also ...
2
votes
2answers
1k views

How do I repair a wooden door's hinge binding?

In a rented flat, I saw the that a door wasn't closing properly, and noticed that the hinge screws were loose and not centered. So I decided to unscrew them, and set them back in properly. Sadly, by ...
2
votes
2answers
457 views

Can I convert a LH inswing door into a RH inswing?

I have a prehung exterior door that is a LH inswing (brand new not installed yet). Can I somehow switch it to make it a RH inswing? Would it work if I installed it as an outswing?