Movable barriers at the entrance of buildings, rooms, cupboards, etc. which can be used to allow or deny access to the space beyond. Typically attached to surrounding structure using hinges, sliders, swivels, etc.

learn more… | top users | synonyms (1)

2
votes
2answers
93 views

How do I fix a door that's sticking closed?

I have a few doors in my house that tend to stick when you try to open them. A few of these I was able to fix by tightening loose screws or repairing stripped screw-holes, which got the hinge plates ...
0
votes
1answer
234 views

Can I just cut this part of the door frame out and replace it?

I finally hung these doors I found at a second hand store. I am a total amateur so please hold back your giggles. No need to explain how this happened, it was a dumb DIY idea. I just need a fix in ...
1
vote
3answers
167 views

Any ideas for cutting door bottoms on pocket doors?

What can I do about pocket doors that are blocked by floor tiles? Could you cut out the bottom (1/4-1/2 inch) on a pocket door while it is still in the frame? What tools would you use? How would ...
5
votes
5answers
258 views

What can I do about pocket doors that are blocked by floor tiles?

I have double pocket doors in my den that I never close. I was going to clean them today, and when I tried to close them they would not close because of the tile being to high. I had the tile put in ...
0
votes
0answers
92 views

How do I change my closet doors?

I have an old wall closet wich has dark brown wooden doors with a little frame for decoration. Something like this. I would like to achieve this kind of doors: With gloss or dark mirror. The think ...
2
votes
1answer
246 views

What type of sander could be used for both sanding spackle and doors?

So I have two diy projects somewhere in my queue: 1) I did a poor spackle job on a wall that appeared to be slightly raised between two sheets of drywall. I put the spackle on and sanded using a ...
1
vote
2answers
83 views

Redoing a hole on a entry way saddle

Our building entrance has a set of double doors, the door that is fixed is latched to the top frame and to the floor through a hole in a stone saddle. The hole in the saddle is too big for that latch ...
4
votes
4answers
551 views

Oak doors stripped of paint - need to fill holes underneath before revarnishing/oiling

We've recently sent our doors for stripping of many years of gloss paint and lead based varnish. The oak doors came back looking largely fantastic. As the doors are very old, understandably they have ...
1
vote
1answer
57 views

How do I choose a router for fitting doors?

I need to fit at least 12 doors, 6 of these are fire doors. So I need to cut out for the hinges on all the doors and frame, as well as fit the Intumescent fire strip in 6 door or frames. So what do ...
1
vote
1answer
113 views

Hardwood Flush Door or Pinewood (softwood) flush door, which is better?

We are renovating our home and replacing all old-broken doors.. We are too confused between getting hardwood or pinewood(softwood) for flush door. Apart from Hardness\Softness and difference in ...
2
votes
4answers
641 views

Is carpet installation easier before or after installation of doors?

I was wondering if carpet installation is easier if doors are not installed and how substantial the difference it makes to install doors after carpet. I would imagine it would be easier but by how ...
1
vote
4answers
5k views

How do I stop my garage door from opening on its own?

My garage door has opened twice in the last 2 weeks during the night. Is someone driving by and opening it "accidentally"? How do I keep this from happening?
1
vote
2answers
373 views

How can I make a door open or close depending on the door position?

Almost every door needs to be either open or closed, rarely do we need it half open. Since the doors (not the band) in my home are old, some of them tend to open or close automatically because their ...
2
votes
1answer
382 views

Does a swing-slide frameless glass door mechanism exist?

I would like to have glass around my square-ish shower (90cm × 100cm) in bathroom corner. It should only consist of two pieces: the fixed wall (100cm wide) door (90cm) But instead of swinging ...
0
votes
0answers
63 views

What would cause a garage door opener to not close?

My garage door will open but will not shut. One of the sensor lights is solid red and will blink if stood in front of and the other sensor light is green. I have cleaned and aligned the sensors, but ...
4
votes
1answer
614 views

What is the name of this cast metal part inside my lockset?

I have a Baldwin front door lockset that doesn't completely retract the latch when using the thumb lever. The handleset is similar to this: model After dismantling the thumb latch assembly, I ...
5
votes
2answers
505 views

How to adjust when hinge mortises are cut too deep?

I cut my mortises manually with a chisel and made them a notch too deep, maybe 1/16" or even less, as a result the door closes too close to the jamb and I am concerned how it will work when there is ...
3
votes
2answers
4k views

How do I fix interior and exterior doors that do not close properly?

I have a couple doors in my house that are having problems. I know that I likely have foundation problems, but I can't afford the $6000 - $10000 to have that fixed at the moment. I need an interim ...
2
votes
1answer
303 views

How do I reattach a door handle lever with a concealed screw

A door handle to one of the rooms in my apartment has come loose. I cannot find an exact match online but it is similar in construction to this door handle. The issue is that the lever part has come ...
2
votes
2answers
134 views

How can we security manage keys for a co-op building?

After having some security incidents in our building, we have decided to change the locks and we are looking at a solution whereby we (co-op board) can give out to residents keys that cannot be ...
0
votes
0answers
30 views

My dog chewed on my bathro doorframe. I rent so this is a big problem [duplicate]

So I have two dogs one goes in the kennel because he can open the doors and the other cant so we always put him on the downstairs bathroom. He's never had an issue with chewing on wood.. Never, so ...
3
votes
1answer
124 views

Should door jamb be lifted off subfloor or touching?

Simple question: when installing a custom made door jamb, should it be sitting directly on top of the subfloor or be lifted up a little (like drywall is lifted 1/2", for example)?
2
votes
1answer
187 views

How should I install a door that is not pre-hung and has a custom jamb?

I have an antique restored interior door with a transom for which I have to make my own jamb due to the height of the side jambs (big boxes sell only 80" door jambs). Should I A) assemble the jamb ...
4
votes
1answer
259 views

Is it necessary to notch the side door jambs for setting the header piece?

I need to make my own door jambs from 1x lumber because I have a salvaged antique transom (the whole door is actually restored antique) and couldn't find pre-made ones at Lowes/HD that are long ...
2
votes
1answer
141 views

How to improve sound isolation of an interior door?

Interior doors of the type frequently used in rented housing (I'm speaking in particular of apartments) seem to be hollow and do not do a very good job of sound insulation. If for example a laundry ...
2
votes
1answer
187 views

Why does recommended door rough opening height add 2-1/2" to door height?

I am skeptical about the recommended 2-1/2" addition to the door height for an interior door rough opening (assuming only subfloor). Consider the following estimated (meaning I am unsure if they are ...
1
vote
1answer
346 views

How do I attach a drywall corner bead to a wood door jamb?

I am installing a door into a wall and I do not want to have casing on the door. I want to install corner bead directly to the door jamb to create a "hidden door". It seems that typical corner bead is ...
3
votes
1answer
120 views

Can I convert a basement window to a door?

We have a poured concrete basement, serving as the foundation of our home, which was built in 2008 in central Minnesota. The basement has 3 vinyl windows, the sills of which are around 1' above ...
3
votes
3answers
852 views

How can I build a screen door?

I have a guesthouse with an unusual door, 32" x 76", and it needs a screen door. Home Depot has tons of cheap-o screen doors that could be cut down to maybe 32" x 78" safely, but an additional two ...
2
votes
1answer
661 views

How do I seal around a door to make the opening more sound-proof?

I live in an apartment condo. The noise from the very loud neighbour comes through the door spaces. I wish to seal off all of her noise. My walls are brick and are good. But the door going out to ...
5
votes
1answer
450 views

What should I check when troubleshooting a doorbell?

Our doorbell stopped working a while ago and my wife finally bugged me enough to fix it. First, I found a diagram on another site when I googled this. It is wired like the right box: I started by ...
2
votes
1answer
285 views

How do I stop the rubber sweep on my front door from squeaking as it moves against the floor?

The main door into my house has rubber at the base of it and it has started to squeak against the wooden floor when opened. How do I fix this problem?
2
votes
1answer
315 views

How to reattach front door rain deflector?

The rain deflector from the bottom of our front door recently fell off when I trod on it by mistake. The door and deflector are both wooden. The deflector was stuck on, not screwed. I'm not quite ...
6
votes
4answers
667 views

How to rescue exterior door paint job?

I have a newly installed exterior metal paneled door that was still dirty when painted. Also embedded in the paint job are bits of foam rubber from the brush, lint from a paint roller and hair from an ...
4
votes
2answers
376 views

How can I install modern locksets on these interior doors?

I've recently bought my first house which I'm very excited about, got into the decorating phase and decided to replace the door handles - some of which were damaged - with nice new ones. Being a ...
3
votes
1answer
111 views

What causes seasonal doors and how do you prevent it?

I understand that wood expands and contracts based on temperature, humidity, and other factors... However in our house the doors are really subject to seasonal changes. For instance my bedroom door ...
5
votes
6answers
552 views

How do I prevent doors on a media cabinet from sagging?

A friend and I have just built a floor to ceiling media shelf unit for DVDs. It has 9 shelves and is about 3' wide. The frame around it is made up of 2"x8" boards and the shelves (except for one in ...
3
votes
2answers
114 views

How can I have a light turn on when a pocket door is opened?

I'm building a new home with quite a few pocket doors and would like to know if there is a way for the pantry and utility room lights to come on when the pocket door slides open.
1
vote
0answers
242 views

How do I build an “internal frame” for a reclaimed wood door?

I heard that doors like the one below are made with an internal frame, and then it receives the faces of reclaimed wood. How is the frame constructed and how are the wood boards fastened to the ...
1
vote
2answers
3k views

How can I make a copy of a door key without a matching blank?

We have an old numbered key, that looks like a regular key, but it seems it is numbered, so the locksmith refuses to copy it without our landlord coming with the original. Our landlord would ...
4
votes
2answers
76 views

Does a door have to be hung on the edge of the jamb

My door jamb is around 140mm, does the door have to be hung on the edge of the jamb like all the other doors in the house, or can i hang it toward the center of the jamb by 70mm so it can clear a wash ...
3
votes
2answers
304 views

How can I replace the roller mechanism on this door?

I have a cupboard in my kitchen that has a roller front door. A few months ago the roller mechanism broke. I need an inexpensive solution for replacing it. I have looked around but can't find a ...
2
votes
3answers
446 views

Where to find very old door knob handle / deadbolt set?

I have a townhouse unit with a very old door knob / deadbolt set that I want to replace because the key doesn't fit well and you have to know how to "jiggle" it in order to get the door to unlock. ...
4
votes
3answers
870 views

How do I repair a warped sliding glass door track?

I have a sliding glass door that barely opens and often jumps off the track. The track under the door is bent and chipped. Is this normal wear and tear? Would raising the wheels fix it? Do I need ...
1
vote
1answer
302 views

What framing is needed for swinging closet doors?

How do you frame an existing, finished opening for double swinging closet doors to be installed?
1
vote
2answers
371 views

How do I prepare doors to be hung?

Changing out interior doors in house. All of them. Going from brown crap to white 6 panel. I have two hinges on each door. Would like to buy new door with predrilled knob hole, cut it down ...
6
votes
1answer
978 views

Can I safely make a door frame taller?

UPDATE: April 22 What I ended up doing was removing the trim non-destructively. Above the door frame, it was clearly not load bearing, so I continued and was not so non-destructive. The end-result ...
3
votes
1answer
658 views

Do you really *have* to mortise for hinges and other door hardware?

I am wondering if it's entirely necessary to mortise a door and jamb for hinges and other miscellaneous door hardware. The only thing I can think of is that, in addition to being screwed in, the ...
2
votes
3answers
622 views

How to narrow a closet door opening?

I have a closet opening that has never had a door on it (has had a curtan on a rod for 30+ years). I'd like to install a bi-fold or similar closet door. The problem is that the door opening is 44 ...
2
votes
2answers
118 views

What do I need to do to finish this outside-door install properly?

A new steel door was installed to our unfinished garage but I am not satisfied with how it currently looks. The previous door had trim covering the gap between the siding and the door, as well as the ...