What approach can be used to fabricate and install a door jamb on a 2.5" thick wall? The wall is composed of 2x4 on side (1.5") and two sheets of 1/2" drywall. Edit: I have an old 5 panel door that ...
I have an exterior door that was apparently installed by unskilled monkeys. The gap between the jamb and door when it is closed goes from close to normal (1/4") at the top to large enough to see ...
So my storm door is in rough shape, and needs to be replaced. It is a Larson storm with two closers (one at the top and one at the bottom). The replacement door I have picked out is a Pella Select ...