I have a deck ledger attached to the rim joist (the vinyl siding was cut away), and some flashing above the ledger. On the side of the ledger there is a gap between the end of the 2x10, and the ...
I am using hidden deck fasteners which screw in to the joist and then hold the board via a notch in the side of the board, pretty standard I think. This fastener will sit on the ledger to hold the ...
I'm planning to replace the current warped ledger board with a new one new using galvanized lag bolts. How can I protect the exposed black paper and OSB between the two vents? Is more flashing ...
I plan on hanging my ledger board similar to the picture described here. I am going to be bending coil stock for the drip cap and the Z flashing. The diagram though doesn't depict what should be ...