I've been asked to make a cabinet, (basically a box with doors). It will be 3 1/2' long x 4'high (2-2'sections)x 2' deep. I have 12" boards planed down to 3/4" width. What is the best way to join ...
What open-source materials are available for understanding basic designs for bookshelves / cabinetry?
I'd like to build a fairly large (11' x 7') set of built-in bookcases with lower doors, and am trying to understand the critical components and construction steps. I'd like to find freely available ...
Setup In my current kitchen, I have a semi-decent (yet always inadequate) amount of cabinet space. I would like to add some overhead cabinets over the peninsula. However, being a peninsula, there is ...
My cabinet doors are tired and have many coats of ugly paint. Rather than strip all the paint off, I'm considering just chucking the old doors and making new ones. I like the plain style of just a ...
Here is an example of what I am trying to put together: What material could I use as a base onto which I can mount the motherboard, hard-disk and other wiring?
I have a set of drawers (custom made) that have draw runners which are attached to the bottom of each drawer on both sides. Unfortunately, the small plastic wheels on part that attaches to the housing ...
I have a piece of signed TV artwork that is mounted in cardboard frame aprox 1cm deep, that i want to hang on the wall. I've had a look round and most of the frames i've found aren't deep enough to ...
Check out this picture of a kitchen cabinet: Notice how the veneers of the cabinets match up perfectly! What's this technique called? My architect said we should just specify "book-matched veneers" ...