I will be installing some new 12x12 tiles in two bathrooms approx 25 sq/ft each. When I pulled up the old tiles, there was no thin set that had made contact with them so the removal was very easy. ...
The bathroom in my house was redone right before I moved in. After moving in, I noticed the toilet is loose. It seems to only stay in place due to it's sheer weight, and it has quite a lot of jostle ...
I am about to install a tile backsplash in our kitchen, using these tiles, in 2" x 4" "mosaic" sheets. When I tiled my bathroom I used thinset (unmodified on the floor and modified on the ...
Our bathroom is out of the 70's and the wife doesn't care for the colors. Remodeling is out of the question for now. Is there something I can use to paint over that ceramic tile so we can at least get ...
We are replacing the carpet around our Heart Shaped tub with tile. For better waterproofing we are using cement board on the top surface. The tub is sunk in the concrete floor with a 7" step up to ...
I've read multiple instructions on mounting a shower rod in bathroom tile, however I've spent much longer than the internet suggests it should take to drill through my tile. I drilled for about 50 ...
My vitreous floor tile gets dirty very quickly. It retains the stains of oil, or any other wet material. I have even seen water leaving temporary wet stains while cleaning them. Is this normal ...