The tag has no wiki summary.

learn more… | top users | synonyms

2
votes
1answer
46 views

What should I do with the extra wire when intalling a new remote for my ceiling fan?

I am replacing a ceiling fan remote. the fan has 5 wires coming from it and the new receiver has 4 wires coming from it. The old receiver had: fan out, common out, neutral in, live in and light out. ...
1
vote
1answer
67 views

How do I rewire this ceiling fan?

Hi someone was cleaning the dust off a ceiling fan in my house today and the screw broke off from the ceiling so we had to take it apart to fix it. Now we are trying to figure out the wiring the ...
6
votes
3answers
3k views

Why does using a dimmer with this ceiling fan and lights cause energy saving bulbs to flicker?

At a hotel I manage we purchased 34 ceiling fans with two integrated light sockets that operate on a dimmer all controlled by a remote control. Obviously using a dimmer with fluorescent bulbs won't ...
2
votes
1answer
32 views

How can I determine why my ceiling fan is noisy?

I have a 5-blade ceiling fan in a child's bedroom (Hunter Douglas). The fan came with the house, so I know nothing about it. It worked fine for a year or so, but it is quite reachable from an upper ...
0
votes
2answers
41 views

Ceiling fan with remote wiring issues

I have a Hunter ceiling fan and LED light kit that comes with the fan, I purchased the display model so I don't have any wiring diagrams. The fan has ground (green), white, black and black with a ...
0
votes
3answers
2k views

2-wire switch loop controlling 2 outlets - replacing with 3-wire to fix?

I am in nearly this exact situation: Can I use a switch loop to power a ceiling fan? We are trying to install a fan, but instead of having a single duplex outlet on the same wall as the switch, we ...
0
votes
1answer
503 views

How can I get my ceiling fan lights working again?

After my light kit on my hunter type 2 fan stopped working I determined there is power entering this device (white wire) but none exiting it (pink wire). The pink wire runs to the pull chain for the ...
1
vote
4answers
14k views

How do I re-wire a ceiling-fan to reverse its direction?

One of the ceiling fans at home was spinning in the opposite direction (clock-wise) and so was sucking up the air rather than blowing it. I live in a hot climate so we always have the fans spinning in ...
0
votes
0answers
21 views

Where can I find someone who could re-use old ceiling fans for parts?

I recently moved to a new house and replaced two of the existing ceiling fans with some new ones. The old ones still work, and weigh about 50lb. each, so I'm guessing they're made of pure steel.... ...
1
vote
1answer
24 views

Ceiling fan motor disassembly

Took apart a ceiling fan. Want to take apart the motor, but this thing looks like it was assembled tight, like a freaking bearing. I want to get to the goodies inside. I've taken out every screw there ...
0
votes
1answer
341 views

Is it wrong to connect the red ceiling wire to the blue wire on my receiver for the remote and the blue wire from the fan?

I have installed a ceiling fan with a light kit and remote control. I connected all the wires as per instructions but, there is a red wire coming from the box that is extra. I connected it to the blue ...
1
vote
2answers
9k views

Why does my ceiling fan light turn off by itself?

I have a remote-controlled ceiling fan and light. I don't run the fan, but when I turn the light on sometimes it will stay on for a long time then just go off by itself. I have tried both kinds of ...
0
votes
2answers
7k views

Why do the lights on my newly installed ceiling fan flick on and then off immediately?

We just installed our new ceiling fan with lights. The fan works fine but the light will flick on and then off again immediately. We took it back down and reinstalled it, ensuring that all wires were ...
0
votes
1answer
55 views

How do I wire a replacement ceiling fan?

We replaced an existing ceiling fan and light with another ceiling fan and light. Neither the new nor the old fan and light have a remote. The old fan and light could be controlled by 2 wall ...
0
votes
2answers
1k views

Why doesn't the light in my ceiling fan work after changing a light bulb?

I had to change a light bulb in my ceiling fan. When I was screwing it in, it popped and the light bulb blew. Now the remote won't turn off the light, but it's still able to control the fan blades ...
2
votes
2answers
286 views

What are the code requirements for installing a ceiling fan alongside a fire sprinkler?

I have a fire sprinkler in my bedroom ceiling which is right in the middle. I want to install a ceiling fan. What are code requirements to follow?
0
votes
1answer
104 views

How do I wire a hard-wired wall switch and a remote for my ceiling fan/light?

I have installed a ceiling fan/light in my living room where only a light fixture used to be. The room is large and with a high ceiling so getting up to change the fan setting and dimming the light ...
1
vote
1answer
4k views

How do I know if a ceiling fan with light and the switch are wired correctly?

There was a old ceiling fan with light and remote in a bedroom of my house that didn't work. It also had a switch with 2 knobs that pushed in and turned labeled motor control and 300 w perm instld ...
0
votes
1answer
74 views

Ceiling Fan and separate ceiling light fixtures

I just replaced my ceiling fan in the kitchen (has no lights). I also have a separate light fixture. Before replacing the ceiling fan, I would turn on one switch to turn the fan on or off, and the ...
6
votes
3answers
14k views

Why do light bulbs all over the house burn out disconcertingly fast?

I've found a couple answers to this question. This generally revolve around the scenario where it's bulbs in a general area such as a fan. My issue is that light bulbs all over the house burn out ...
2
votes
1answer
47 views

Can I use a split tab switch for mains voltage and low voltage?

LeGrand (Pass & Seymour) make a multi-control single pole switch with a split tab TM8113WCC, which allows for the control of two independent circuits on a single yoke (one box). Code question: is ...
1
vote
1answer
200 views

Why would changing ceiling fan speed cause an AFCI breaker to trip?

I recently installed 2 ceiling fans with Lutron combination light and fan dimmer switches. On both circuits, if more than a half second or so is taken when selecting the fan speed (that is, a delay ...
1
vote
1answer
42 views

How to wire multi-control rocker switch

What's the correct way to wire a multi-control rocker switch (e.g. Leviton 1755) that has three switches on one yoke with a common supply? What wire(s) do I run from the switches to each of the ...
0
votes
1answer
66 views

How can I independently control a light and fan, where only a single hot wire is used?

The apartment I live in was built with a ceiling fan installed, but the landlord replaced the fan with a model that has a light built in. He's put a controller in the ceiling that has fan and light ...
2
votes
1answer
92 views

Installing a ceiling fan in a house built pre 50's

If I am installing a ceiling fan w/lights to an old house with only 2 wires coming out of the ceiling a hot (black) and white (neutral) is it necessary to connect the green ground wires from the fan ...
0
votes
0answers
19 views

Ceiling fan install - orientation of mounting bracket to slope of ceiling

I'm replacing a light fixture with a fan/light using a down rod mount on an angled ceiling. The frame studs run parallel with the slope of the ceiling. Manufacturer notes to install mounting bracket ...
0
votes
0answers
8 views

Wiring a ceiling fan to an old house built pre 50's [duplicate]

If I am installing a ceiling fan w/lights to an old house with only 2 wires coming out of the ceiling a hot (black) and white (neutral) is it necessary to connect the green ground wires from the fan ...
1
vote
6answers
3k views

Installed Ceiling Fan, Now Light Switch Not Working Properly

Last night I switched a ceiling light fixture with a Ceiling Fan. Before it was just a light fixture and it was controlled from a switch on the wall; one of two switches on the same switch plate/panel ...
1
vote
2answers
97 views

Is 150 CFM ventilation fan right choice for bathroom in my older condo?

My bathroom ventilation fan broke up and I am shopping for a new better one. I noticed the newer fans are higher CFM through-put and are quieter, I have narrowed down my choice to this one. My ...
10
votes
3answers
2k views

How can I install a ceiling fan that needs a 4“ box where I only have a 3” box?

As part of a home renovation project I discarded my old ceiling fan and have bought a new one. When installing the new one the electrician tells me that I have a 3" junction box and that I'll need a ...
1
vote
1answer
76 views

Which wires do I connect to my new ceiling fan?

I looked all over the internet and my outlet box seems to have unorthodox wiring/ colors. On the ceiling outlet box I have 3 thick wires, red, white and green, and a fourth single little wire that ...
3
votes
2answers
1k views

3-way switch for light with fan controlled by switch built into fan. Odd wiring layout. Wiring assistance required

My electrician and I have parted ways. This has resulted in my having to finish off various projects. I have managed to get 2/3 lights operating the way they were intended. However, I am having ...
2
votes
1answer
66 views

Ceiling Fan Pancake Box Install

I need to replace a ceiling fan and add a round 1/2" deep pancake box. However, the clearance with the drywall is slightly off and leaves a gap in the ceiling when the ceiling fan is installed. Is it ...
0
votes
1answer
68 views

How can I determine what is causing these electrical problems?

My kitchen lights are having electrical issues that I am trying to identify probable causes for. When I bought the house, there was an overhead light in the kitchen and several plug-in light fixtures ...
4
votes
5answers
18k views

Why has my ceiling fan's speed become slower?

We have owned a Minka Aire ceiling fan for about 4 years and it has been great overall; running for 24hrs a day. It has 3 settings and when we initially purchased the fan; the speed was noticeable ...
9
votes
3answers
40k views

What do I do if there are only two wires coming from my ceiling electrical box?

I'm about to install several Hunter ceiling fans. This will be the first time I've done anything electrical past changing a bulb. The instructions that came with the fan show three wires coming from ...
4
votes
2answers
35k views

What do I do with the unused wire for ceiling fan installation?

I recently replaced my bedroom ceiling fan with a newer ceiling fan and with the old fan I could: Use one switch on the wall to turn on/off the light Use the other switch on the wall to turn on/off ...
1
vote
4answers
4k views

Is it safe to convert a candelabra base in my ceiling fan to a medium base for use with larger CFL's?

I have a ceiling fan with 3 candelabra sockets. The lighting from the incandescent bulbs is terrible. I have these 27 watt bulbs that fit a medium socket. I want to use this type of adapter. ...
4
votes
3answers
5k views

Why are my ceiling fan light bulbs burning out quickly?

My ceiling fan light bulbs burnout frequently. From what I can tell the fan is mounted well and does not oscillate more than I would expect it to. I use GE multi-use soft white 40 watt intermediate ...
3
votes
3answers
7k views

How can I troubleshoot a ceiling fan light kit Issue?

I have an issue with my ceiling fan light; the light is on, then eventually over time it starts flickering off and on, eventually over time shutting off. I'll switch the light off, and then switch it ...
2
votes
2answers
143 views

How to fix plaster on ceiling due to screw coming loose?

A builder did a bad job when painting and the ceiling vent came loose, upon inspecting it seems that they broke the ceiling plaster by unscrewing it, tried to hide it by screwing it in another place ...
2
votes
1answer
832 views

How do I troubleshoot an intermittent problem with a ceiling light/fan?

We have a ceiling fan that includes a light fixture. One day the light went off several minutes after turning it on. I checked the panel, and found that the breakers were ok. Room receptacles from ...
1
vote
1answer
369 views

Why would the lights on a ceiling fan not work after a power outage even though the fan does?

Why does the ceiling fan work but the lights on it will not turn on after a power outage?
0
votes
3answers
3k views

How do I wire a ceiling fan?

I recently purchased a ceiling fan - Harbor Breeze Tilghman WITHOUT a light - to replace a ceiling fan WITH a light. The wires coming from the (old)ceiling are red, black, white, green, and copper. ...
1
vote
1answer
43 views

Could a loose connection be causing my ceiling fan to work intermittently?

The fan and light will turn on then off then on, etc. Sometimes it will last a few seconds and other times minutes. Is it just a loose connection?
1
vote
1answer
100 views

3 cables in one box wiring issue

My house was built in the 50's. In my master bedroom I need to replace the fan, so I disassembled it, bought the new fan and am looking at the wiring with a serious question here. There are three ...
0
votes
2answers
2k views

How can I replace the bulb in this ceiling fan?

So I moved into this house over a year ago, and upon moving in, there was a ceiling fan in the kitchen area that has continued to baffle me (and anybody I have look at it). The core of it all seems ...
10
votes
5answers
19k views

Should I put a dimmer switch on a ceiling fan?

I have a ceiling fan on our bedroom's vaulted ceiling. Since we don't want 7' pull-cords, the speed is stuck at full-tilt, which is no good. The fan has separate switches on the wall for lights and ...
0
votes
0answers
49 views

Wiring with two black wire options from ceiling

Just took down an older light fixture in our dining-room to replace with a fan/light combo unit. The old light fixture had two clearish yellow wires each connected separately to two black wires coming ...
2
votes
2answers
157 views

How much ceiling fan wobble is acceptable?

I've got 3 ceiling fans. The large one (well, when it was working, the motor is seized up now and needs replacement) has always been rock solid. No noticeable vibration/wobble in use. Pushing on ...