How do I caulk this beast? I was trying to replace the caulking, took out the old caulking to find out that the bathtub was improperly installed, and the tiles are not over the lip. There is this half ...
I'm sure this is a relatively simple task but I've never done it before and want to make sure I get it right. There are some holes/separation appearing in the caulk between the bathtub and the wall ...
Contractor who remodeled our bathroom used non-sanded grout between bathtub (acrylic) and first layer of tile. He said that he recommends that instead of caulk as caulk will be trapping moisture and ...
I installed a new tub which does not have a flange. Before I put up Duraboard what product, if any, should be used to seal the space outside of the tub's edge (garden/jacuzzi type of bathtub edge). ...
My tub sits in an alcove that is 6 inches wider than the width of the tub at the head, and sits against a full wall at the foot. I tiled the alcove but stopped at the front edge of the tub so that ...
What's the name of the 'rubbery' sealant they use between the bath and the wall, and why don't they use it in between the wall tiles? They use a hard grouting between wall tiles, but if the weight of ...
I recently had my bathtub re-glazed and re-caulked by a company that specializes in this. The tub was re-caulked 3 days after it was re-glazed by the specialist. Everything looked ok. We waited ...