When installing hardwood floors, should I use rosin paper, roofing felt, or nothing underneath? Why?
I've installed hardwood floors, over top of OSB subfloor with a layer of roofing felt in between. I copied this from the hardwood floor contractor who did a kitchen in my home once. He'd been in ...
I'm going to be building a 6 foot tall cedar privacy fence in the spring (with pressure-treated posts) and need to determine what to do with the two posts that meet the side of my house. In order to ...
I am planning to build a new Computer table and a book shelf by myself. I will require a drill machine that can drill a hole into wood and that can also drive a screw into this hole (using the drill, ...
I am in the process of building a one level home in PA. After the formed concrete walls were poured and the framing began, I noticed that on one side of the house that the sill plate was flush with ...
I plan on replacing my kitchen cabinets later this summer. The old ones were home made by the previous owner and are oddly sized so I need to make my own out of plywood. Is it possible to put dowel ...
I'm contemplating building a dresser and am looking at designs and such to get my creative juices flowing. Today I noticed that some dressers/chests have concave or outwardly curving drawers on the ...
I have a cheap Harbor Freight brad nailer and it does a great job of fastening my window trim and baseboard molding/etc. The only thing I don't like about it is that the point of contact is metal. On ...