In my rented apartment, there is a cabinet above the stove which cannot be used for storage - the stove exhaust fan is sitting there. The first photo shows the doors closed with an 18" ruler for ...
In my pantry cabinet, the holes for the plastic brackets has gotten too large and they do not hold. The cabinets are made out of particle board. Does anyone have any suggestions?
I am a new homeowner of about 2 months now. I have not done much in the way of home repair before now, but I do find that I am quite capable so far. My largest project so far was the re-tiling of my ...
I recently scrounged some steel shelving that I'd like to hang in my garage. This used to be in an office, its for paperwork but will work great for some things in my garage. The mounting holes on ...
I want to use a french cleat to hang some basic open cabinets in my garage. I've seen recommendations anywhere from 3/4 to 1 1/2 inches thick, but nobody seems to be talking about weight. Is there a ...
I have a set of cupboards with shelves that adjust in height, by means of moving pins that hold up the shelves to different holes: Unfortunately, for some reason, whoever made the cupboards didn't ...