I'm blocking up a doorway in a brick wall. I've decided to block it up using a stud wall as that should be a bit easier than bricking it up. I know that the bricks are 11cm depth plus approx 2cm ...
My grandfather's house is getting to be in bad shape after years of neglect and more so the back section of the house is falling apart. Now the back section of the house, if I remember correctly, was ...
I don't want to use veneer, I want to use real brick. Is it as easy as using tie-ins to the studs and setting the brick as one would normally? The existing wall is drywall, So I was thinking of ...
Where my ceiling drywall meets a brick wall there is a gap. This is smaller at the brick itself (maybe 3/16") and then larger where the mortar is struck. This seems too large to fill with ...