Tagged Questions

The tag has no wiki summary.

learn more… | top users | synonyms

0
votes
1answer
52 views

Can I install tandem breakers in this panel, and would one 20 ampere circuit be enough for a garage?

I'm a home owner searching for information before hiring an electrician to come and do work on my home. What I want: Have a separate breaker\s to service a single car garage. 3 receptacles each ...
2
votes
4answers
60 views

Breakers tripping

USA (California) home with 240V 150A service. I have a contractor working on the house siding. He accidentally drilled though NM-B/Romex on a 15A circuit. (The repair of this is not my question and I ...
2
votes
1answer
132 views

Is it OK to have more than one neutral wire in the same connection on the neutral bus bar on a main panel?

I'm installing a new 100 amp panel and have almost run out of openings on the neutral bus bar and still have 4 more breakers to install. Can I double up on the neutral side or should I start using ...
2
votes
0answers
40 views

Is it ok by code to enclose a residentail breaker box in a finished basement as long as there is an access door and what are the requirements? [duplicate]

I am finishing a basement and want to enclose the 200a service box and wiring with a framed cabinet of some sort. Is there any requirements for clearances and what you can enclose it with? I am in ...
0
votes
1answer
102 views

How to calculate size of electrical service?

I know that more goes into it than just the size of my mains (wire gauge, etc). but from the below image, would this generally mean that I have 200 amp service or 100 amp?
1
vote
1answer
152 views

How Many Amps Is this breaker? [closed]

I am trying to figure out how many amps this box has. Top left breaker is 50amp and top right is 30amp. I want to put an xray machine on this that requires 100amps at its max. Do you think its ...
1
vote
2answers
612 views

What gauge wire is typically used for the input to a home breaker box?

I have a moderately-sized home (~2400 sq. ft.) in the United States that was constructed in 1999. I am looking to build a home energy monitor to track my electricity usage versus time. Obviously, in ...
3
votes
2answers
2k views

Can I terminate a ground wire to the neutral bus if the ground bus is full?

I have a Crouse-Hinds main load center. The ground bus is at the top left of panel and the neutral bus is at the bottom right of the panel. I want to add a 15 amp circuit for two outlets in my ...
7
votes
1answer
370 views

How should this circuit be properly grounded?

I am hiring an electrician to do the work so my question is more for my education and helping me ask the proper questions to the perspective contractors. Purchased a condo recently and want to put in ...
9
votes
5answers
19k views

Do the breaker amp readings sum up to dictate my current panels total / possible amperage?

So I know practically nothing about houses having rented for many years, just bought a house and was told by my inspector the panel is only a 70 amp panel and will need to be upgraded before I go to ...
3
votes
1answer
495 views

What are my options to repair a broken tab on a bus bar?

My A/C went out this week. The problem was a broken tab on a bus bar with cut power to one phase of the 220v circuit. My HVAC guy was able to get me going again by swapping the A/C unit to the dryers ...
2
votes
1answer
1k views

What would be involved in moving electrical panel a few inches?

My reading on the Building Science Corporation's website has convinced me I ought to remove the shoddy fiberglass+vapor barrier that the contractors put in my basement and place XPS directly against ...
4
votes
3answers
3k views

Why does my circuit breaker trip with any small load, even after replacing the breaker?

I have a 20A 240V GFCI breaker in my main breaker box going to a conduit to another breaker box outside. All worked well last summer. Now, when I put any load (weed-eater, light, etc.) on an outlet ...
3
votes
2answers
4k views

Does it matter if I mix neutrals and grounds in the main panel?

Code question here. I do a lot of electrical and like to follow code exactly. I have done pretty much everything but hook up lines to main box. Taking a stab at it this time. First I see that I ...
2
votes
2answers
3k views

Can I extend the ground/bus bar in a main service to accomodate subpanel equipment ground?

I am about to replace the main service breaker panel in my house. The old panel (a 200amp Siemens 40-circuit) had bus bars that extended the entire vertical length of the box. The new panel I would ...
5
votes
2answers
8k views

Is it code-legal to have a circuit breaker box within a storage room?

I am currently in the process of planning a room remodel to convert an existing bedroom into a home office and storage room. One thing that makes this conversion a little bit tricky, is the existence ...
6
votes
3answers
3k views

Is it OK to have ground wire connected to breaker box wall instead of neutral bus?

After having issues with lights flickering, I noticed the main 100A breaker was warm and arcing slightly. Instead of just replacing the breaker, I decided to call in a electrician to install a larger ...
6
votes
1answer
3k views

What is a split bus panel, and how do I recognize it in the field?

I'm having trouble identifying a split bus panel. I design and install Solar systems, and lately (after Mr Wiley gave a few seminars to local inspectors) the local authority having jurisdiction (AHJ) ...
1
vote
0answers
184 views

What could cause neutral wires in my service panel to read 120V?

I have a 200 A service panel with 12 breakers. Seven of the breakers work fine. There are 5 other lines that come in. When I hook up the black wires to the breakers and turn them on I get a charged ...
-2
votes
1answer
227 views

Does my electric panel need replacing?

How can I tell if my electric panel needs replacing? Got up today and suddenly I lost power to a tandem breaker the breakers weren't tripped. Then realized I also lost my water pump. The water ...
2
votes
0answers
101 views

What could be causing this weird problem with a 240v trainer?

I'm in electrical classes and we are hooking up a 240v trainer. Last year the trainer worked fine. When connected to power there is a 120v light bulb that lights up to show that power is on. ...
1
vote
0answers
274 views

Why does half the house go out when a single breaker trips?

The breaker box at my brother's house is well marked and balanced except when a breaker is tripped half the house goes out. I'm currently living on the third floor of his house. When I turned on a ...
11
votes
4answers
8k views

What is simplest strategy to map circuits to breakers in the panel?

My breaker box is very poorly labeled and I want to figure out which circuits may have overloaded (or close to it) and which could reasonably handle a little more. In the past I have just tried ...
4
votes
1answer
899 views

What is permissible for a breaker box cover?

We're doing some remodeling in our kitchen and unfortunately the breaker box is right in the middle of a wall we are going to cover with tile. My current thought is to replace the existing metal ...
4
votes
5answers
2k views

How Do I Power A 220 Water Heater Off Two 110 Breakers

First off I know this is not the best idea. To start my 200 Amp Main has suffered a partial failure and as it is old (60s) and unusual it will be very hard or impossible to replace it. Since the main ...
5
votes
1answer
141 views

Can I use a hot wire on another panel?

I have a room upstairs that's the size of a small studio apartment. My daughter decided to move back home but my tenant noticed that the room she moved into is tied into their apartment. I went to the ...
1
vote
0answers
442 views

Does a homeowner need a permit for electrical work in indianapolis [closed]

i have a 100 amp breaker box i want to replace with a lager 100 amp breaker box do i need a permit in the city of Indianapolis?
12
votes
4answers
1k views

What is this 110/24V 60Hz transformer in the breaker room for?

My friend sent me a photograph of this transformer, which is installed above the main breaker panel, with leads running from the panel into the transformer. The stamped labels read PRI. Volts: 110 ...
5
votes
3answers
3k views

Does a grounding wire from a breaker panel to an outside grounding rod need to be in conduit?

I've got a breaker panel in my detached garage (it is not a sub-panel, but is a primary forked off just past the meter). The panel seems to be wired correctly- the neutral and ground bars are tied ...
3
votes
2answers
301 views

Should I run 2 regular circuits or a subpanel to my septic site?

We're installing a septic system on otherwise undeveloped land. Eventually there will be a house near the septic system, but that could easily be years away. The electric service entrance is on a post ...
8
votes
2answers
886 views

Large voltage swing on incoming main hot line- definitely outside?

So for much of last fall, I had an issue of flickering lights in my house (half of the house seemed to flicker in unison). Back in December, I called the electric company, who came out, and claimed ...
7
votes
2answers
8k views

Can I install an additional breaker bus bar on my main breaker panel?

I'm adding several new circuits to my main electrical panel as part of a kitchen remodel. The panel with accommodate the new circuit breakers, but it does not appear to have enough neutral and ground ...
5
votes
2answers
2k views

Why doesn't the main breaker shut off power for house?

Location: California | United States I'm certain I'll need a licensed electrician for this but wanted to get thoughts on what could be going on. I recently noticed that power remains on in my house ...
5
votes
1answer
739 views

Is some asymmetry in a breaker box normal? What about neutral to ground having voltage?

So, next in my quest to evaluate the health of my new home's electrical system, and call in professionals if needed, was some voltage checking of the panels/outlets around the house. What I have is a ...
13
votes
4answers
52k views

Is it ok to have mixed grounds and neutrals on bars in a breaker box?

So to continue my line of electrical questioning (and perhaps narrow down my flickering light problem), I took a look through the two panels in this house. There is a 200amp main service in the ...