I am trying to figure out how many amps this box has. Top left breaker is 50amp and top right is 30amp. I want to put an xray machine on this that requires 100amps at its max. Do you think its ...
My A/C went out this week. The problem was a broken tab on a bus bar with cut power to one phase of the 220v circuit. My HVAC guy was able to get me going again by swapping the A/C unit to the dryers ...
I have a 20A 240V GFCI breaker in my main breaker box going to a conduit to another breaker box outside. All worked well last summer. Now, when I put any load (weed-eater, light, etc.) on an outlet ...
The breaker box at my brother's house is well marked and balanced except when a breaker is tripped half the house goes out. I'm currently living on the third floor of his house. When I turned on a ...
My breaker box is very poorly labeled and I want to figure out which circuits may have overloaded (or close to it) and which could reasonably handle a little more. In the past I have just tried ...
First off I know this is not the best idea. To start my 200 Amp Main has suffered a partial failure and as it is old (60s) and unusual it will be very hard or impossible to replace it. Since the main ...
I'm adding several new circuits to my main electrical panel as part of a kitchen remodel. The panel with accommodate the new circuit breakers, but it does not appear to have enough neutral and ground ...
Location: California | United States I'm certain I'll need a licensed electrician for this but wanted to get thoughts on what could be going on. I recently noticed that power remains on in my house ...