The tag has no wiki summary.

learn more… | top users | synonyms (1)

-2
votes
2answers
192 views

Does anybody have a source for epoxy putty (for plastics) in black color? [closed]

I need to seal a broken plastic ring, but it needs to stay black - all the epoxy putties I find are grey or white. Thanx!
2
votes
4answers
9k views

Why does my shower head drip when the tub faucet is on?

I just installed a new tub fixture set: There are two controls - one for temperature and one for volume. The large handle is volume. When the diverter valve is engaged the shower sprays properly ...
2
votes
2answers
8k views

How can I remove a stuck bath stopper assembly?

The drain in our tub is slow and I'd like to snake it. I was planning on going through the overflow / drain stopper toggle plate: But I can't remove the stopper and link from the overflow pipe. It ...
4
votes
2answers
3k views

How to snake a bathtub with no overflow drain?

Our upstairs bath tub has been taking longer and longer to drain and my wife has finally tasked me to fix it. Yesterday I literally emptied an entire bottle of Liquid Plumber down the drain ...
0
votes
2answers
2k views

How can I replace a water pipe on the second floor without the need to damage the bathtub?

My father is the owner of the house, and on the second floor area there is a bathtub over the top of the water damaged ceiling on the first floor that i currently live, my father told me that these ...
1
vote
1answer
483 views

What can I do about a jammed tub drain plug?

We have an older home with a parallel bar tub drain plug that is internal to the P trap. Similar to that of a Bathroom sink. Lift the lever up, to bring the plug inside the p-trap to position to plug ...
1
vote
1answer
362 views

Would it make sense to peel off paint from peeling bathtub

The paint in our tub has been developing air pockets under it for a while, and this morning a big chunk ripped off. As far as I can see, the layer underneath is undamaged except for the stains. ...
5
votes
2answers
2k views

What should I use as backing for mosaic accent tiles that are a different thickness than the main field tiles?

I noticed, too late (during install), that the mosaic tile my wife chose for accent in our shower is a different depth than the regular tile we're using. The mosaic tiles are about 1/8-3/16" thinner ...
2
votes
2answers
3k views

What could cause low water pressure in tub and no water coming out of shower head?

Water pressure in tub has suddenly dropped and water will not come out of shower head at all. I can hear what sounds like water running up the pipe to the shower head when I have the tub faucets on, ...
3
votes
1answer
661 views

How to install tub into non-square rough opening?

I am remodeling a bathroom and I am putting in a new tub and then tile the walls of the tub. My problem (right now) is that my rough opening is 60-3/4" at the back and 60-1/2" at the front. This ...
2
votes
1answer
326 views

Do tiles need to be cut to fit area between back wall and the edge of the bathtub?

I am in the process of remodeling a bathroom and I am putting in a new tub and plan to tile the walls. It seems most tubs are standard depths of 30 or 32 inches, ours is 32". Now the new tub is ...
1
vote
1answer
1k views

How to remove a tub drain with no spokes?

I attempted to use my tub drain removal wrench to remove a bath tub drain. Unfortunately the spokes of the drain broke and the drain flange cracked. Not being terribly skilled at plumbing I am now ...
5
votes
2answers
1k views

Are either of these tools suitable for tightening the pipe union nut underneath a bath?

I'm having trouble tightening the pipe union nuts on some new bath taps I've fitted at my mum's house. I got everything out OK, and (because the previous plumber had put the hot tap on the right ...
3
votes
3answers
2k views

How to reattach a tub overflow pipe that is offset from the tub

I recently discovered that the overflow drain that is supposed to be connected to the overflow outlet on my bathtub is...well, not. Taking off the cover of the overflow outlet, I see the pipe ...
1
vote
1answer
488 views

How to remove a tub insert

We're looking at the effort and time for a bathroom renovation, and the biggest item on the list is replacing an old fiberglass tub insert/surround with a standing shower insert/surround. Looking at ...
1
vote
1answer
202 views

How can I remove a stuck tub spigot?

While trying to remove the child safety cover from my tub spigot I managed to shear off the plug mechanism that activates the shower. The guy at the hardware store sold me a new spigot and now I ...
1
vote
1answer
506 views

How can I restore the waterproofing behind a shower/bath mixer/diverter?

After install a new shower/bath mixer, I am proceeding to restore waterproofing behind the mixer follow by the tiles. Originally between the water pipes and the tiles there is a layer of gyprock ...
5
votes
1answer
2k views

Tile Around bathtub. Over drywall vs. vapor shield & backerboard

I am remodeling my bathroom, and the last step is the tub. The Place for the tub was about 3 inches longer than the tub, so we built the wall out by putting drywall over the studs. I keep reading ...
3
votes
1answer
153 views

What could be leaking after installing a pet sprayer on a tub?

Installed a simple pet sprayer in the upstairs master bathtub. It has a long hose with a release valve/button on the very end of it. About 6 hours after installation (and without officially using it ...
3
votes
1answer
438 views

How do I repair a chipped bathtub? [duplicate]

Possible Duplicate: How do I patch rusty spots in bathtub? I have a tub upstairs with a chip in it. Is there an easy way to sand the porcelain down and redo the tub? What would be the most ...
4
votes
1answer
560 views

How should I caulk between bathtub and drywall?

My tub sits in an alcove that is 6 inches wider than the width of the tub at the head, and sits against a full wall at the foot. I tiled the alcove but stopped at the front edge of the tub so that ...
2
votes
0answers
54 views

How can I fix my leaky bathtub faucet with minimal damage to the wall? [duplicate]

Possible Duplicate: How to fix a bathtub faucet that leaks only when the shower runs? Our bathtub faucet leaks a steady stream of water. Sometimes this will temporarily slow to a drip if I ...
4
votes
2answers
878 views

How should I seal a shower base that is leaking?

I have a shower stall with a cement-like slab base. The shower base is ancient and has developed some cracks. The top surface has some sort of sealant which has worn away, with the result that water ...
4
votes
6answers
4k views

How can I fix a bathtub that was not set properly?

I think the floor was not prepped correctly. The tub creaks a lot and there is a great deal of vertical play when standing and moving around. The tub does appear to be level, so I don't think that's ...
2
votes
2answers
17k views

How should I waterproof an upstairs bathroom floor?

I'm adding on a bathroom upstairs. My question is what precautions should I take to waterproof it. I'll have new copper, PVC drains and the floor itself I'm worried about. It's sitting half above a ...
5
votes
3answers
9k views

What are the advantages of various bathtub materials?

We're going to be putting in a new tub, and I'm not sure what to get. Cast iron? Enameled steel? Acrylic? My concern with the cast iron (other than lugging it up the stairs) is the rust problem. How ...
4
votes
1answer
5k views

How to fix a bathtub faucet that leaks only when the shower runs?

I just moved into an apartment and the faucet in the tub is fine when all of the water is off. It leaks when I turn on the water and switch it to the shower head. What could be the problem? It's a ...
3
votes
3answers
5k views

How do I replace a broken bathtub drain?

I am trying to replace my bathtub drain however the cross bars have broken off so I am unable to unscrew it from the tub. How can I unscrew it? EDIT: This is approximately the product I am trying ...
4
votes
1answer
2k views

How do I anchor an acrylic claw foot tub?

I have been working on remodeling my bathroom. As part of the renovations we have decided to replace our old tub with an acrylic claw foot tub. The tub is extremely light weight. I am assuming that ...
0
votes
1answer
164 views

How do I cosmetically resurface a bathtub to get rid of a greenish / pinkish hue?

I have a bathtub that has over the past 2 years begun to show a greenish / pinkish hue. I use standard cleaning solutions (Scrub Free, Vim, etc.) to remove dirt (weekly), however while the tub gets ...
6
votes
7answers
16k views

How do I retrieve a detached plunger from a bathtub drain?

I have an old bathtub drain assembly that is similar to this: As far as I can tell, the linkage broke off completely due to old age. If I unscrew the trip lever and cover, it's not attached to ...
3
votes
5answers
12k views

Is there an approved way of fixing a cracked Fiberglass Tub/Shower?

I noticed a crack in the bottom of my tub, and noticed that it flexed when I stepped near it. I called in 2 companies to give me an estimate on repair. The first, proposed a more or less ...
4
votes
2answers
627 views

What do you call this old pipe to bath tap join and how do I remove it?

I'm trying to replace the bath taps. I'm at the point where i've removed one, but can't get the 2nd one off. They are connected differently (go figure). See attached image: As i'm new to plumbing i ...
3
votes
1answer
318 views

Will Liquid Plumber Foaming Pipe Snake corrode the drain seal on my bathtub?

I just bought and used a bottle of Liquid Plumber but I was just worried about whether the stuff might be able to corrode the rubbery seal under and around the top of the bathtub drain. I live on a ...
6
votes
1answer
989 views

What steps should I take after kitty litter has been washed down the drain?

A relative tried to do me a "favor" and clean out the bathtub where a kitty box had been temporarily stored. I guess 2-3 pounds of clumping litter were washed down the drain. It doesn't appear to be ...
3
votes
2answers
1k views

Is there a way to adjust the bathtub handle tension?

Is there a way to adjust the tension on a stem for a posti-temp valve? I've taken off the handle and trim, and I don't see any way to adjust the tension. I have a single turn handle on my bath tub. ...
4
votes
1answer
7k views

How do I patch rusty spots in bathtub?

One of the tubs in our new home has a few spots where the enamel is chipped away and the metal underneath has started rusting. I don't want to replace the tub yet, so how can I clean and patch the ...
3
votes
1answer
475 views

What to look for when choosing a new bathtub?

I am in the middle of a total bathroom renovation. Now I need to choose a new tub but there are so many choices and price points I don't know what to look for. My situation is that I have room for a ...
5
votes
1answer
1k views

How to replace bathtub pull-up drain stopper with screen/mesh for hair?

I have a bathtub which also is a shower, and it has a twist-and-pull type drain. Currently I never actually use the bathtub for taking a bath, only showers. Unfortunately it keeps getting clogged with ...
0
votes
4answers
6k views

Sealant used to prevent water getting between bath and wall?

What's the name of the 'rubbery' sealant they use between the bath and the wall, and why don't they use it in between the wall tiles? They use a hard grouting between wall tiles, but if the weight of ...
3
votes
2answers
2k views

Low Pressure From Shower Head Troubleshooting

The water pressure from the shower head in one of my bathrooms is extremely low. The pressure coming out of the faucet of the bath is low as well. It has not always had this low pressure, it has ...
4
votes
3answers
1k views

Should I Get My Bathtub Refinished?

The bathtub at my new place isn't in horrible condition, but it does have a few patches on the bottom that look a bit grayer than the rest of the tub, and are rougher. In general the bottom is not as ...
3
votes
2answers
170 views

Refinishing bathtub

We have a bathtub which is part of a bathroom with a 70's color scheme. Rather than replace the tub we were thinking about refinishing it. What are the pros and cons of refinishing a bathtub, either ...
4
votes
1answer
383 views

How to build up concrete slurry under a new bath

I'm replacing our bath. It is a standard built-in plastic bathtub, with a concrete slurry built up underneath it. I talked to a builder some time ago who explained that it was to support the weight of ...
5
votes
5answers
28k views

How do I remove a stuck faucet/tap cover?

I've been fixing leaking faucets in a bathroom. There are total six faucets in a bathroom, two made into a bathroom basin, two made into the wall in the shower tube and the last two are on the wall ...
1
vote
2answers
24k views

What type of tile should I install in a bath/shower surround?

I am about to remodel our bathroom. Currently the tub/shower is all tiled but the backing is not secure/stable so there is cracking in the grout and I know water is getting behind. I prefer the look ...
3
votes
2answers
1k views

Building a sunken tiled bath

I'm planning to build a sunken bath/wet room type shower. The plan is to raise the floor of the bathroom by 18" and then build a bath with its bottom just above the original floor level (to allow for ...
3
votes
3answers
2k views

Can a tub and shower share the same drain?

Can a shower and tub share the same drain?
4
votes
4answers
54k views

How soon can I use my shower that I recently grouted and tiled? Should it cure first?

We have been retiling my tub surround area and finished grouting the tile last night. I used non-sanded PolyBlend grout (sold at Home Depot) and added a bottle of Grout Boost Advanced Pro. Everything ...
2
votes
1answer
1k views

How should I fix a small crack hole in Mirolin 3-piece tub/shower?

We've got an acrylic Mirolin tub/shower that recently developed a small pea-sized crack/hole in the bottom, causing water to gush out when the tub is filled. I just ordered a repair kit from ...