I have a traditional two handled (one hot and one cold and they are separate) bath faucet. I recently had it reseated and the washers replaced, however, what I noticed was that immediately after shut ...
So we had a bathroom tap that looks pretty much like this: the red lines I drew are where the tap has a kind of screw joint that separates the head from the side hot/cold taps. The problem is the ...
The bathroom sink has a separate cold and hot tap, their centres are 20cm apart. I want to replace them with a mixer tap. However, the mixer taps I see have 18cm distance. What are the options for ...
Most of the taps in my new house are fitted with so-called "anti-vandal" screws in the tap heads, as shown in the image. These screw into the tap head to tighten them onto the stem. I can't remove ...