For questions relating to powered consumer products that perform some value-added task within a home, including but not limited to hot water heaters, stoves/ovens, dishwashers, refrigerators, etc. For questions specifically relating to furnaces or air conditioners, see the "hvac" tag.

learn more… | top users | synonyms

2
votes
2answers
18k views

Where does the ground wire go in a 3-prong dryer cord configuration?

We moved to a new place where the dryer connection is 3-prong instead of 4-prong. The dryer was originally 4-prong, so we bought a 3-prong cord and installed it. It works fine, except I am not ...
2
votes
1answer
1k views

AEG “micromat_combi 635” halts with error E14. What to do?

My AEG MICROMAT_COMBI 635 often halts with a beep and an error E14. I then need to temporarily unplug it from the mains power. I remember this annoying error occurring since years (it first made me ...
2
votes
3answers
3k views

Is there a high temperature glue that I can use on a cook top?

We have a 1 year old Frigidaire gas range (This model or a near sibling, purchased from Lowes). The burner grates appear to be painted cast-iron, while the surface below them is a polished and ...
2
votes
2answers
933 views

Can I put a convection toaster oven over the range?

My over-the-range microwave died and I want to replace it with a convection toaster oven. I would love it to be put where the microwave was, over the stove. Can I do this? I have looked for ...
2
votes
1answer
4k views

How do I stop a leak in a refrigerator water line connection?

I have a copper water line going into my refrigerator. It's leaking at the connector line in the attached picture. It looks like the leak is not from the fridge, but from the connection line, right ...
2
votes
4answers
21k views

What could cause my washing machine to stop before the rinse cycle?

My washing machine will get stuck right before the rinse cycle. The washing machine will be full of water. The way to "fix it" is to twist the knob right after the "rinse" line, find the sweet spot, ...
2
votes
2answers
617 views

dishwasher odor

I have a GE Profile Triton XL dishwasher and the dishes come out clean but have an odor to them, it's a metallic/sour smell. Any idea on the proper way to clean it? There is no built in clean cycle. ...
2
votes
1answer
618 views

Why does my Kenmore washing machine not move out of the wash cycle?

While doing laundry this weekend, it seemed like the washer was taking a very long time to get through 1 regular load. I finally went to check on it and found that it never moved from the very first ...
2
votes
1answer
246 views

What type of centralized home control hardware is available?

I recently got excited about the idea of creating a web software to run locally for my home that could be accessed via computer, smart phone, or tablet, which would give me complete control over most ...
2
votes
2answers
172 views

How do I troubleshoot a dishwasher that runs normally until wash cycle begins, then doesn't wash?

My dishwasher stopped working correctly a couple of weeks ago. After loading dishes and starting it, it successfully fills with water, rinses the dishes, drains, and then switches to the actual ...
2
votes
1answer
330 views

Can I convert a European washing machine to work with a North American outlet?

I'm looking to hook up a European washing machine I got my hands on to either a standard North American outlet (unlikely) or a 220 V appliance outlet. Here's the info I have right now: 230V ...
2
votes
2answers
652 views

Why does my LG Microwave range hood hum loudly when the fan turns on?

Lately once the microwave has been running for more than 5-10 seconds, a very loud humming noise starts happening. When I remove the top vent panel, the humming stops, but I cannot for the life of me ...
2
votes
2answers
161 views

How can I diagnose my fridge's evaporator fan?

How can I find out which part has failed in my fridge? The evaporator fan at the back of the freezer is not working, so the freezer is cold but the fridge is not. How can I figure out if it's the fan ...
2
votes
1answer
804 views

Easy to repair washing machine? [closed]

It appears our front loading Kenmore (aka Whirlpool) may need new main bearings, and various sources (including appliance repair guy and online reading) suggest that replacing them is a non-trivial ...
2
votes
1answer
223 views

What could cause washing machine drum to bang against housing during spin cycle after a repair?

I just replaced the agitator cam and cogs and drive block in my Whirlpool top loading washing machine. I put everything back together exactly according to directions and now the outer drum seems to ...
2
votes
1answer
126 views

Can I replace the insulation in an LG oven?

Something has gotten between insulation and metal of oven. Whatever it was, it was cremated and the smell is bad when oven is turned on. Can the insulation blanket be replaced?
2
votes
1answer
41 views

Gas Oven Stove Will Not Ignite

My wife reported that our GE profile JGS968SEK1SS would not heat. I removed the igniter and it is reporting 99.1 Ohms for continuity, which seems fine to me. What other troubleshooting options do I ...
2
votes
1answer
1k views

Why won't my washer spin even though it still agitates?

I have a Kenmore 80 series washer and it recently stopped spinning and agitating and I found out it was the coupler. So I changed that and it start to work again, normally. After a week or two it ...
2
votes
1answer
484 views

Why did my oven light stop working after cleaning the oven?

I replaced the bulb in the oven with a new bulb and it won't light. Both the old bulb & new bulb work in a table lamp. The light stopped working after cleaning the oven. Any suggestions? Is ...
2
votes
1answer
138 views

Damaged connection when replacing oven element

Our fan oven stopped getting hot the other day so I guessed that it is likely to be the element. Removed the cover and element so I could test it with a multimeter. Unfortunately on one of the ...
2
votes
0answers
853 views

How can I repair my Bosch dishwasher that won't drain?

My Bosch dishwasher stopped draining. At the end of the cycle, it gets stuck at 1 minute remaining. When I open the door, there's water that hasn't drained. Here's what I've tried: Following the ...
1
vote
1answer
545 views

Why does my dishwasher detergent get stuck?

My dishwasher isn't working like it's supposed to. Everything seems to be working fine, but then after the machine stops, I open the door and see that my glasses and plates are suspiciously grimy. ...
1
vote
1answer
69 views

What to look at first when when circut breaker that fridge is on is tripping?

I have a house where the circuit breaker has tripped a few time over the last several days. It flipped one evening, we flipped it back and was ok for a couple days. We went away for the weekend and ...
1
vote
1answer
64 views

Why isn't my refrigerator getting cold?

My compact fridge doesn't get cold, the motor is still running. Ice built up in the freezer part. I defrosted it, and hit it with a hammer to remove the ice. Then I hit something , some kind of smoke ...
1
vote
1answer
191 views

Guidelines for running tv cables behind walls for an HD TV

My in-laws want to mount a new TV on the wall and have asked their contractors (they are in the middle of a renovation) to open a hole above their gas burning fireplace for routing cables to/from the ...
1
vote
1answer
58 views

What are these parts described by the service manual?

The service manual for a LG WM3677HW shows a very bad diagram... and I'm not very familiar with the parts to ID them. The image above tells me to probe 3 components, and if out of spec replace ...
1
vote
1answer
297 views

Can someone explain this interface of frigidaire front load washing machine?

Can someone please explain this interface (the buttons, what do they do?) of front load washing machine from frigidaire?
1
vote
1answer
248 views

What could be causing my washer to make thumping sounds after the spin cycle?

I have a Kenmore model 417.94702300 washer/dryer combo. A couple days ago the washer began making a thumping sound after every spin cycle, whether as part of a wash or just a rinse. I found this ...
1
vote
1answer
91 views

How to keep self cleaning oven from damaging things?

I would like to know some tips/opinions on the self cleaning function of an oven. Can it possibly hurt the oven's own circuitry? what is a good way from preventing surrounding from getting damaged ...
1
vote
1answer
2k views

How do I fix a broken microwave door hook latch?

I accidentally snapped off one of the hook latches on my microwave door - the door will shut, since the other latch is still there, but the safety mechanism of the oven prevents it from operating ...
1
vote
1answer
201 views

Why is water sitting under the basket of my GE topload washer?

I have noticed that when my washer cycle is finished and I open the lid while its finishing the spin cycle I can hear water under the steel drum as if it is not drained all the way. This is driving ...
1
vote
2answers
616 views

How do I fix a dishwasher leak and repair damage to surrounding cabinets?

I have a Whirlpool dishwasher bought in 2005 that evidently leaks steam from the side and has caused mold to build up on the cabinet door that is next to it. What could cause this to happen and how ...
1
vote
3answers
245 views

Identify a washing machine part - the exit port

I'm trying to identify (= find the name for) a washing machine component. Unfortunately, I don't have this part - I gave it to my landlord who is looking for a replacement. It's basically the exit ...
1
vote
0answers
53 views

How to know that new appliance won't trip the circuit?

I'm buying new appliances and want to make sure I won't trip the circuit. MW/convection is 950 W, 1750 W and 900W for three different functions. There is 20 Amp circuit for that. the new stove ...
1
vote
0answers
22 views

Test gas cooktop without a gas line?

I've found a great deal on a used cooktop. We're eventually going to remodel the kitchen so have been collecting things as we go along. The catch is that this cooktop is for natural gas, and we have ...
1
vote
0answers
66 views

what could happen if a 240 stove cord was improperly installed and then stove was plugged in to the receptacle?

I think my new stove cord was installed wrong and after being plugged in we heard a ((whooooaamp)) sound and all the lights in the house flickered, now none of my 220 appliances will work correctly. ...
1
vote
0answers
37 views

Should I remove dryer support roller residue and how?

I have a front-loading electric Whirlpool dryer (LER4634PQ0) that's got a sagging drum, making it noisy and causing it to soil clothes. I first noticed it via brown marks on my clothes caused by a ...
1
vote
0answers
44 views

Metal back on a slide in electric range

Is it necessary to keep the metal back on a slide in electric range. I have a fan that comes up from the back of the counter and it needs a little more room. The new range will not slide back as far ...
1
vote
0answers
318 views

Would this buildup cause “dHE” error on an LG Tromm dryer?

Got the machine off craigslist. During the drying cycle it stops and shows the error. The user manual tells that with dHE error I should inspect the water supply, if the water supply is within spec, ...
1
vote
1answer
1k views

Why would the magnetic switch on my refrigerator door trip when the freezer door opens instead?

This is pretty strange: a few months ago I moved into a new apartment with a Fisher & Paykel refrigerator (freezer on top). It's a fairly basic unit, and until today it worked OK. This morning I ...
1
vote
0answers
105 views

What could be causing this washer to rattle very loud sometimes?

I've read online that this could be due to the bearings being worn out on the washer, but before I go ordering a replacement part I'd like to get a 2nd opinion. Does this look/sound like it's the ...
1
vote
0answers
728 views

Understanding Model numbers of GE Appliances [closed]

GE makes a lot of different models of each appliance (just look at any website selling washers/driers or refrigerators). Models of the same type may have subtle differences in model number, e.g. two ...
0
votes
1answer
209 views

How do I make sure that a new washing machine doesn't overflow?

My house suffers from a chronic lack of planning on the part of the designer. For example: the piping to my washing machine is both too small, and angled so that the water has to run uphill. This ...
0
votes
2answers
157 views

How can I prevent multiple socket from being damaged?

I have the following setup at home: one PC (300 W PSU) two 22 " TFT monitors a speaker system one external hard disk with separate PSU - all of the devices are plugged into a multiple socket ...
0
votes
2answers
175 views

trying to save a cheap electric driller

I wanted to use an old electric driller that it's battery has worn down and i couldn't find a new battery. on the battery it says 7.2V. So i took a AC-> 7.5V DC 1A Transformer and used it in place of ...
0
votes
2answers
590 views

Is my Kenmore HE4T Washer repairable for a reasonable price?

Kenmore HE4T Washer Is this repairable? Here are a couple of videos I took of it happening... http://www.youtube.com/watch?v=nfog6-36fdg&feature=youtube_gdata_player ...
0
votes
2answers
35 views

Humidity causes Asko clothes washer to buzz and not start

I have an Asko 20004 Front Loading clothes washer. When the air is very humid (in the summer) it buzzes when I turn it on but the moter will not start. I've disassembled it and the buzzing seems to ...
0
votes
2answers
2k views

salvaging DC motors from home appliances [closed]

In what home appliances I can find a 40V (or so) DC motor?
0
votes
1answer
42 views

Electric Range Keeps Blowing its Fuse

I have a brand new electric range that I am having a problem with and would appreciate some insights so that I can determine whether its the appliance or my electricity is at fault. When I turn on 2 ...
0
votes
2answers
4k views

How do I troubleshoot my Kenmore dryer that doesn't heat up?

I have a Kenmore 110.64642400 that has just started acting up. It spins fine, using the timed dry function the timer knob advances (although not in the auto dry function), but it never heats up. ...