A substance used for sticking objects or materials together.

learn more… | top users | synonyms (1)

12
votes
1answer
463 views

Should cement board be glued and screwed to the studs?

I've seen some people recommend that cement board be glued and screwed to the stud framing for wall and ceiling application. I haven't seen this recommendation on any of the manufacturers install ...
8
votes
4answers
30k views

What is a strong glue for bonding metal?

I have a (cheap) garage door that has the metal frames/hinges connected to the actual metal door by some kind of glue. The glue on one part of the frame has broken off. What is a glue that is strong ...
8
votes
3answers
12k views

How do I remove THIN layer of carpet glue from concrete?

The folks who owned this house before us were the cheapest people around. They glued carpet to our concrete floor with a very thin layer of glue. Now, I'm having a terrible time scraping it off. I ...
8
votes
1answer
3k views

Can I paint over wallpaper glue?

I have a room where I removed the wallpaper in preparation for painting. Surprisingly, the very old wallpaper just peeled right off, leaving behind most of it's glue. I used some wallpaper remover ...
7
votes
3answers
430 views

How can I hang a large but light poster on a concrete pillar?

I have a large (est. 5'x7') sheet of plastic foam with a poster printed on it. It weighs maybe 3 lb and is reasonably stiff. I'd like to hang it on a solid rectangular concrete pillar about 2' wide. ...
6
votes
2answers
4k views

How do I safely get glue off of wood that's to be stained?

I'm building a closet and I've just made doors for it. It's red oak wood with a rail & stile construction and raised panels. I was a little careless and some of the wood glue (Titebond) escaped ...
6
votes
2answers
1k views

How do I remove construction glue from brick?

I just removed glued-on paneling from an interior brick wall. Now, I have the task of removing the glue from said brick. What is the best method of doing so? I know there's no getting around the use ...
6
votes
1answer
552 views

Our vinyl floor install will need to be redone — will new vinyl need to be used, or can the existing vinyl be reused?

I had a company (whose name will not be mentioned unless they refuse to fix the job) install a new vinyl floor. I'll spare all the ugly details except the one that's relevant to this question which is ...
5
votes
1answer
239 views

Glue crawl space rigid insulation

I've dug a trench around the perimeter of my crawl space. Then I planned the next steps. I took a week off but I'd like to finish this project next weekend. I am going to glue 2" R-10 FOAMULAR 250 ...
4
votes
8answers
2k views

What substances should you avoid contact with your bare hands?

I started thinking about this yesterday because I currently have a weird feeling second skin from the polyurethane adhesive I used to attach my kitchen backsplash on Sunday. I foolishly assumed since ...
4
votes
4answers
2k views

fixing stripped screw in soft-wood door frame? [duplicate]

Possible Duplicate: How do I rehang a wooden door with worn screw holes? As you can see in the below image, the upper screw holding in the lock plate (name?) has stripped completely out of ...
4
votes
3answers
376 views

Why doesn't duct tape work well on cables?

In the past, I've used duct tape on cables (e.g., Power, LAN). For instance, I taped cables to a wall, I taped cables together for storing etc. The taping often failed after some time: The taping ...
4
votes
4answers
4k views

What type of glue should I use to repair my hardwood floor?

I'm replacing the tongue and grove boards in a section of my hardwood floor that were water damaged. On some of the boards, I'll need to cut out the bottom edge of the female side. On a YouTube ...
4
votes
1answer
403 views

How can I remove soap and toothbrush holders?

What is the safest and least damaging way to remove existing soap and toothbrush holders from drywall? We would like to remove these holders because we do not use them. It seems the previous owner ...
4
votes
2answers
3k views

What glue should I use for glue-down engineered flooring installation?

I bought a roll of FloorMuffler UltraSeal underlayment (essentially, sealed high-density foam) at Home Depot for this project. The instructions are very specific about which adhesive to use: "To be ...
4
votes
1answer
557 views

adhesive for gluing rubber to wood

I am replacing rubber tread covers on an old wooden staircase. As far as I can tell, the old ones were simply glued on. They lasted about ten years before they started slipping and cracking where they ...
4
votes
1answer
449 views

Gluing Hardwood Floors?

We recently had our house built, and included the "hardwood floors" upgrade. When we moved it we were pleased with the way the floors looked. Some time later, water started coming up from beneath the ...
3
votes
5answers
7k views

How to remove construction adhesive from concrete?

We removed a wooden dance floor that was glued to concrete with liquid nails. How do I remove the liquid nails that is all over the concrete floor? Has anyone had success with heat, mineral spirits ...
3
votes
4answers
1k views

How can I hang heavy objects on a wall, without leaving any marks?

Command Hooks don't hold very much weight wise and I would like to mount heavy objects - e.g. a whiteboard ... any ideas? (yes this is drywall - I cannot leave any marks in it ). context: college ...
3
votes
2answers
2k views

How can I repair a shattered clay pot lid?

I dropped a clay lid and it broke cleanly in two pieces. Is there a way to glue it back together? I don't mind it that the break will be visible, while the pot looks good too, I mostly use it for ...
3
votes
3answers
3k views

How do I remove glued-on carpet?

I'm trying to remove carpet from a small closet in our bathroom (at most 3.5 ft by 3.5 ft). I started to remove it and it looks to have been glued around the perimeter. What's the easiest way to ...
3
votes
2answers
245 views

How can I clamp two 325 mm planks while gluing them together?

I have a base that is 650mm deep. I'm going to have to glue several planks together to get this depth and, eventually, the last two to make the 650mm base. The problem is, I don't have (and can't ...
3
votes
1answer
96 views

Are all epoxy created equal?

I'm under mounting a sink to a slab of granite and there many different brands of epoxy. Is one better for this type of job?
3
votes
1answer
168 views

How do I remove carpet tape from a painted wall?

How to remove carpet tape from painted wall without damaging the paint? This article suggests using warm cooking oil, but I am afraid the oil will irreversibly damage the paint. Should I try some ...
2
votes
4answers
585 views

How can I attach a 1/8" strip of steel to MDF so that it stays secure forever for eternity?

I have attached two 3/4" panels of MDF together, so the end result is a 1 1/2"-thick panel. I need to reinforce it so that it does not bow, so I thought of attaching a 1/8"x1 1/2"x6' strip of steel ...
2
votes
2answers
269 views

How do I force glue into a hard to reach hollow?

I have a group of wall tiles coming off the wall. They don't separate from each other, just come off together - when I knock with a finger I hear dull sound meaning there's already a hollow behind the ...
2
votes
2answers
462 views

Glass rod joining/welding: temperature instead of glueing?

I have some glass things to fix ("decorative kitchen stuff to play with"). The broken part is a rod, about 8mm diameter, made of some colored glass. I thought of using nichrome wire, but seems that ...
2
votes
2answers
328 views

Is it practical to glue stuff to tiles with hot glue?

I need to hang several small things in the shower (like a soap holder). The shower cabin has tiles. To do this, I am thinking to use a hot glue gun. I've seen it used before to glue small plastic ...
2
votes
2answers
291 views

Non-Toxic Wood Glue

I've got a cutting board that was left soaking for too long, and it subsequently cracked and split. Is there a non-toxic wood glue I can use to glue it back together? I'm planning on using a quick ...
2
votes
3answers
733 views

What glue to bond metal and plastic in cold weather?

I have a small plastic torch (flashlight) with a magnet on the back. I use it to provide light in a small metal trailer. Recently I pulled the torch off the metal wall, and the magnet came away from ...
2
votes
2answers
3k views

Is there a high temperature glue that I can use on a cook top?

We have a 1 year old Frigidaire gas range (This model or a near sibling, purchased from Lowes). The burner grates appear to be painted cast-iron, while the surface below them is a polished and ...
2
votes
1answer
127 views

How can I join boards for table legs?

I'm working on building a table, and I'm trying to find some lumber to use for the legs. I've found some 3" x 3" x 3' lumber nearby, which is more or less exactly what I need, however it's relatively ...
2
votes
1answer
380 views

What type of adhesive do I use to bond metal & glass?

I need some strong adhesive for a table. The glass panel fell off and I have no idea what type I need. It needs to be clear and very strong. Pics here:
2
votes
1answer
315 views

How to reattach front door rain deflector?

The rain deflector from the bottom of our front door recently fell off when I trod on it by mistake. The door and deflector are both wooden. The deflector was stuck on, not screwed. I'm not quite ...
2
votes
1answer
246 views

How can I repair this broken bathroom tap?

So we had a bathroom tap that looks pretty much like this: the red lines I drew are where the tap has a kind of screw joint that separates the head from the side hot/cold taps. The problem is the ...
2
votes
1answer
681 views

Low temperature construction adhesive?

My laziness has come home to roost. I did some work over the summer that required me to rip out some old beadboard planking, which unfortunately destroyed most of the beadboard. After looking at the ...
2
votes
3answers
1k views

What kind of glue can be used to join flat drive belt and v-belt?

For my special project I need to join flat drive belt with a v-belt (the wider part of it's profile to be precise). Due to the nature of their application such combined part will be rotating with most ...
2
votes
2answers
70 views

Is it OK to liquid nail drywall in a hard-to-reach corner?

I need to drywall around an 8" air spiral pipe coming out of a wall at a 45 deg angle and there is very little room on the side between it and the wall the pipe runs parallel to. So it is very very ...
2
votes
3answers
3k views

What kind of glue can I use to attach a laminated poster to a wood frame?

I have a 50" x 36" laminated poster that has a propensity to curl. One copy of it curled so much that it bent the foamcore on which it was mounted. I decided to mount a different copy of it on a wood ...
2
votes
1answer
88 views

How should I pretreat painted plasterboard before gluing fiber cement sheet over it

I'm going to glue (and nail) cement tile underlay sheet to a painted plasterboard wall. The paint seems to have decent adherence, should I do anything before gluing?
1
vote
5answers
296 views

How do I deal with glued-on drywall?

I'm in the process of gutting a bedroom. I had to remove a pocket door, move the light switch, add a couple of receptacles, and deal with some rot/mold/insects on the exterior wall. I found that ...
1
vote
3answers
827 views

Does “No more nails” grip strongly enough to hold soffit vents in place while it is setting?

I need to fix some soffit vents to a UPVC soffit, due do the fitness of the UPVC soffit the vents tend to fall out. Will “No more nails” grip strongly enough to keep them in place until it sets?
1
vote
1answer
72 views

Can I glue a second layer of drywall?

I want to attach a second layer of drywall to old, partly damaged and crumbling drywall, with construction adhesive. I cannot use screws only because my patch's edges do not fall on studs (the patch ...
1
vote
1answer
79 views

What is open time, working time for adhesive?

Most floor adhesives specify open time and working time. The instructions on the can of glue do not spell out the meaning of these terms. Looking on the Internet yields ambiguous results. To my best ...
1
vote
1answer
75 views

How to remove two-component adhesive from a stainless steel surface?

My dad used a two-component adhesive when trying to glue a door stopper to our stainless steel radiator. However he read the manual wrong and now there is dried out glue on the radiator and the door ...
1
vote
4answers
834 views

How to mount ceramic tiles in a wrought iron frame?

I bought my wife some ceramic house numbers and a wrought iron frame for Christmas. I had assumed I could just pop the numbers into the frame, but that is not the case. The numbers are free floating, ...
1
vote
3answers
2k views

What, if anything, do I do to repair notched floor joists?

I have been building for a long time, so I know where floor joists can be bored or notched without compromising their strength. Unfortunately, I have a client whose floor joists were hacked at by ...
1
vote
4answers
103 views

How to remove floor adhesive from concrete?

The problem is aggravated by the presence of underlayment. When engineered hadrwood flooring was removed, some underlayment was removed with it, and some stayed glued to the floor. What is the best ...
1
vote
2answers
99 views

Trouble removing vinyl tile and underlayment from wood flooring

I'm in the middle of remodeling my half bathroom and have run into a sticky situation with the existing flooring. My goal is to remove it and refinish the flooring beneath, much like has been done for ...
1
vote
1answer
3k views

How do I re-attach my kitchen cabinet's laminate?

Steam from my electric kettle has caused the veneer of one of my kitchen cabinets to separate from the doors and I need to stick it back on. What is the best method to use? Should I peel the veneer ...