Planning on painting the steel purlins of a carport, that is peeling. I assume the primer and old paint are "oil based" alkyd. I think we will have it sandblasted. What primer should I use on the ...
I'm fairly new to the DIY scene, so to say that my working knowledge of any power tool is minimal is an understatement! I'm currently embarking on a DIY project that requires cutting acrylic boards, ...
I'm working on a costume for comic con - and I know that's not your typical home improvement project, but out of all the SE sites, this seemed the most appropriate place to ask. The costume consists ...
We painted a closet recently with a latex/acrylic based paint and no plastic hair caps. This lead to the issue with some unsightly paint splotches on our hair. After several washes the paint still ...
I am in the planning stage of a table project and have a question about a piece of acrylic. I intend to use a 3' x 3' square piece of acrylic that is 0.236" thick as the center. Would a 1" lip on all ...
How do I get the shine back on the bottom of my acrylic shower stall?
This is for a DT GCSE Coursework Project, not Home Improvement, but same sort of thing. I'm designing an iPhone Dock, and on the inside there is going to be a piece of ('gently') line bent acrylic in ...
What is the right tool and method to make a small rectangular cut-out (about 9"x5") on an clear acrylic sheet (0.093" thick)? I want to use the sheet as a kind of kitchen back splash protector behind ...