I'm trying to wire a two stage exhaust fan for my greenhouse. The motor comes set up for 240v wiring and is to be controlled by a thermostat. I undertsand how to get the 240v from the panel, but can't ...
What do I need to do to have the 240v system activate an indicator light only when the pump is activated?
I have a spring run-off. I have 1 effluent pump 240v with piggy-back float switch as primary pump I have 1 effluent pump 115v with piggy-back float switch as secondary pump set to higher level to ...
What could happen if a 240 stove cord was improperly installed and then stove was plugged in to the receptacle?
I think my new stove cord was installed incorrectly — after being plugged in we heard a ((whooooaamp)) sound and all the lights in the house flickered, now none of my 220 appliances will work ...
I had to move around my dryer to do some work in my laundry room. When I plugged it back in, it wouldn't turn on at all. None of the buttons would even make the lights come on. I unscrewed the end ...
The subpanel is fed from a 50 ampere 240 volt two pole breaker. Currently there are 3 20 ampere 120 volt breakers, running on it (two freezers and an air compressor). Would like to add a 30 ampere ...